直线电机气浮精密定位平台设计与控制

张从鹏; 刘强

直线电机气浮精密定位平台设计与控制

张从鹏,
刘强

北京航空航天大学机械工程及自动化学院, 北京 100083

基金项目: 国家自然科学基金资助项目(50390063)

详细信息

作者简介:
张从鹏(1975－),男,河南鲁山人,博士生,zhangcongpeng@163.com.

中图分类号: TH 133.35; TP 273
计量
- 文章访问数: 4494
- HTML全文浏览量: 162
- PDF下载量: 2462
- 被引次数: 0
出版历程
- 收稿日期: 2007-03-14
- 网络出版日期: 2008-02-29

Design and control of air bearing precision positioning stage driven by linear motors

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 为了掌握光刻机工件台的设计和控制技术,建立了双边直线电机驱动的H型气浮精密定位平台,对该精密定位系统的气浮导轨设计方法、双边直线电机同步运动控制等关键技术进行了研究.利用有限元计算方法分析设计了气浮导轨,采用预加载技术提高气浮导轨的承载能力和刚度.实验结果表明:气浮导轨具有较高的承载能力和刚度, X和Y 导轨的竖直方向静刚度为276.9N/μm和333.3N/μm.H型工作台的双边直线电机需要高精度的同步运动控制,传统的串、并联同步控制不能满足精度要求,设计了基于同步速度偏差的改进型并联结构同步控制器,采用模糊控制实现PID参数的自适应整定.实验表明:采用改进的控制器将速度同步精度提高了3倍多,适合于具有强机械耦合的多电机同步运动控制.H直线电机气浮定位平台具有承载能力强(40kg)、精度高(<2μm)的优点,可用于精密工程领域.
- 直线电机 /
- H型运动平台 /
- 同步控制 /
- 气浮导轨 /
- 预加载
Abstract: In order to master the design and control techniques of the workpiece table in photoetching machine, an H-type air bearing precise positioning stage driven by dual linear motors was established. Some key techniques, including design method of air bearing slider and synchronic-motion control of dual linear motors, were studied. Three air bearing sliders were analyzed and designed by finite element method. Preload technologies were adopted to improve air bearing-s static performance. The experiment results show that the air-bearing sliders have high load capability and stiffness. The static stiffness of X -slider in the vertical direction is 276.9N/μm and that of Y -slider is 333.3N/μm. The dual linear motors of H-type stage require high-precision synchro-control. Traditional tandem and parallel synchronous control can-t fulfill the demand. An improved parallel structure synchronous controller based on velocity synchro-error was proposed, which adaptively tuned the PID parameters by fuzzy controllers. The experiment results show that the synchronous velocity precision is improved more than three times by using the improved synchronous controller, which is suitable for multi-motor synchronization control with strong mechanical coupling. H-type air bearing positioning stage driven by linear motors has high load capability (40kg) and high accuracy (<2μm) and suits to be used in precision engineering.
- linear motor /
- H-type motion table /
- synchronous control /
- air bearing guideway /
- preload

HTML全文

参考文献(1)

[1] 孙麟治,李鸣鸣,程维明.精密定位技术研究[J].光学精密工程,2005,11(13):69-75 Sun Linzhi, Li Mingming, Cheng Weiming. Study on precision positioning technique[J].Optics and Precision Engineering, 2005,11(13):69-75(in Chinese) [2] 张从鹏,刘强.基于静压气浮导轨的直线电机高性能工作台研制[J].机械科学与技术,2006,10:1212-1216 Zhang Congpeng, Liu Qiang. Devolopment of high-performance linear motor stage based on static-pressure air-bearing slider[J]. Mechanical Science and Technology,2006,10:1212-1216(in Chinese) [3] 陶家生.闭式双排节流孔矩形气浮导轨的计算方法[J].光学精密工程,1997,2(1):55-61 Tao Jiasheng. Calculation method of rectangle closed air bearing slider with double row orifices[J]. Optics and Precision Engineering,1997,2(1):55-61(in Chinese) [4] 刘暾,刘育华,陈世杰.静压气体润滑[M].哈尔滨:哈尔滨工业大学出版社,1990 Liu Tun, Liu Yuhua, Chen Shijie. Static pressure gas lubrication[M]. Harbin:Harbin Industry University Press,1990(in Chinese) [5] 马明建,辛世界,王辉林,等.静压式平面空气轴承压力场的有限元分析[J].农业机械学报,1994,12(4):91-97 Ma Mingjian, Xin Shijie, Wang Huilin, et al. Finite element analysis of static plane air bearing pressure field[J]. Transaction of the Chinese Society for Agriculture Machinery,1994,12(4):91-97(in Chinese) [6] 孙西芝,陈时锦,程凯.空气静压导轨静态性能的解析计算及分析[J].机械设计与制造,2005,1:40-42 Sun Xizhi, Chen Shijin, Cheng Kai. An analytic method calculation and analysis of the aerostatic guide way[J]. Machinery Design & Manufacture,2005,1:40-42(in Chinese) [7] 翁秀华.双直线电机同步控制的研究 .沈阳:沈阳工业大学电气工程学院,2005 Wong Xiuhua. Study on synchronous control of dual linear motors . Shenyang: School of Electrical Engineering, Shenyang Industry University,2005(in Chinese) [8] 翁秀华,郭庆鼎,刘德君.基于模糊自适应PID的双直线电机同步驱动系统控制[J].组合机床与自动化加工技术,2004,9:28-29 Wong Xiuhua, Guo Qingding, Liu Dejun. Based-on fuzzy self-adaptive PID synchronous drive of dual linear motors system[J]. Modular Machine Tool & Automatic Manufacturing Technique,2004,9:28-29(in Chinese) [9] 黄峰,汪岳峰,顾军,等. 模糊参数自整定PID控制器的设计与仿真研究[J].光学精密工程,2005,12(6):235-239 Huang Feng, Wang Yuefeng, Gu Jun, et al. Design and simulation study of fuzzy parameter self-tuning PID controller[J]. Optics and Precision Engineering, 2005,12(6):235-239(in Chinese) [10] 年海威.双直线电机伺服系统同步进给控制的研究 .沈阳:沈阳工业大学电气工程学院,2006 Nian Haiwei. Study on synchronous control of dual linear motors servo system . Shenyang:School of Electrical Engineering, Shenyang Industry University,2006(in Chinese)

施引文献

资源附件(0)

访问统计