Sliding mode control of permanent magnet synchronous motor with great inertia load
-
摘要: 当负载的转动惯量较大时,直接驱动式永磁同步电动机(PMSM, Permanent Magnet Synchronous Motor)系统在启动、停止或速度有变化的情况下,会产生很大的惯性转矩,从而对系统的控制性能产生影响.为了解决此类问题,采用了滑模变结构的控制方法.首先建立了PMSM的数学模型,同时考虑了摩擦对于系统的影响.在此基础上,设计了滑模变结构控制器,并运用Ansoft公司的Simplorer仿真系统对整个系统进行了仿真,对比例-积分(PI, Proportion-Integral)控制和滑模变结控制性能进行了比较.结果表明,滑模变结构控制方法能很好地适应大惯量负载控制系统.Abstract: When the moment of inertia becomes big, huge inertia torque will be produced when the directly drive permanent magnet synchronous motor(PMSM) system starts, stops or changes speed, thus to bring impact on the system performance. In order to solve this kind of problem, the control method on the sliding mode variable structure was adopted. The mathematic model of the PMSM was established and the factor of friction was considered. And the sliding mode variable structure controller was designed. The Simplorer simulation system of Ansoft Company was used to simulate the whole system. Then a comparison was made between the performance of proportion-integral (PI) control and sliding mode variable structure control. The results show that the sliding mode variable structure controller method can be adapted to the moment of inertia loading control system.
-
Key words:
- permanent magnet /
- synchronous motor /
- motor control /
- sliding mode
-
[1] Akpolat Z H, Asher G, Clare J．A practical approach to the design of robust speed controllers for machine drives[J]．IEEE Transactions on Industrial Electronics,2000, 47(2):315-324 [2] 黄丽莲,王茂．测试转台变负载轴系的自适应控制[J]．中国惯性技术学报,2002,10(5):70-72 Huang Lilian,Wang Mao．An adaptive control method for test table’s axes with time-variant load moment of inertia[J]．Journal of Chinese Inertial Technology,2002,10(5):70-72(in Chinese) [3] 彭天好,徐兵,杨华勇．大惯量变转速泵控马达调速系统模糊控制[J]．机床与液压,2004(10):77-78 Peng Tianhao,Xu Bing,Yang Huayong．Fuzzy control of great inertia variable rotational speed pump-control-motor speed governing system[J]．Machine Tool & Hydraulics,2004(10):77-78(in Chinese) [4] 吴志宏,毛明平,陶生桂．带变惯量负载的感应电机模糊控制策略研究[J]．电气传动,2004(2):8-11 Wu Zhihong,Mao Mingping,Tao Shenggui．Research of fuzzy control strategy for induction motor with variable inertia load[J]．Electric Drive,2004(2):8-11(in Chinese) [5] 唐任远．现代永磁电机——理论与设计[M]．北京:机械工业出版社,1997:244-248 Tang Renyuan．Modern permanent magnet machines—theory and design[M]．Beijing:China Machine Press,1997:244-248(in Chinese) [6] 刘金琨．滑模变结构控制Matlab仿真[M]．北京:清华大学出版社,2005:4-8 Liu Jinkun．Matlab simulation for sliding mode control[M]．Beijing:Tsinghua University Press,2005:4-8(in Chinese) [7] Young K D,Utkin V I,Ozguner U．A control engineer’s guide to sliding mode control[J]．IEEE Transactions on Control Systems Technology,1999,7(3):328-342 [8] 高为炳．变结构控制的理论及设计方法[M]．北京:科学出版社,1996 Gao Weibing．Theory and design of variable structure control[M]．Beijing:Science Press,1996(in Chinese) -
点击查看大图
计量
- 文章访问数: 3228
- HTML全文浏览量: 161
- PDF下载量: 1288
- 被引次数: 0
下载:
