基于极限应力分析的十字形双向拉伸试件设计

韩非; 万敏; 吴向东; 王海波

基于极限应力分析的十字形双向拉伸试件设计

北京航空航天大学机械工程及自动化学院, 北京 100083

基金项目: 国家自然科学基金资助项目(50475004)

详细信息

中图分类号: TG 386
计量
- 文章访问数: 3242
- HTML全文浏览量: 151
- PDF下载量: 1288
- 被引次数: 0
出版历程
- 收稿日期: 2006-06-09
- 网络出版日期: 2007-05-31

FEM design of cruciform biaxial tensile specimen based on limit stress analysis

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 十字形试件双向拉伸实验是实现复杂加载路径的有效方法,是研究板料后继屈服行为和成形极限可行的实验手段,解决十字形试件中心区的大变形、应力均匀性、应力测量计算方法等是其应用的主要问题.通过试件中心区减薄实现了中心区大变形以致颈缩破裂,给出了3种不同形式的中心区减薄形状,从应力均匀性、最大变形出现位置和避免应力集中等方面进行了优化对比分析,并探讨了计算中心区应力的解析方法.结果表明,中心区方形减薄的十字形试件有更好的中心区应力分布均匀性,更容易实现大变形以致破裂发生在中心区,能较好地控制应力集中,是更适用于板料成形极限应力图研究的实验装备.
- 成形极限 /
- 极限应力 /
- 复杂加载路径 /
- 十字形试件 /
- 双向拉伸试验
Abstract: The cruciform biaxial tensile test is an effective and practical method to realize the process of complex strain paths for the investigation of subsequent yield behavior and forming limit of sheet metal, and the key questions should be solved including the large deformation, homogeneousness of stress distribution and the method to measure the stress in the center region. Using cruciform specimen with thinning center region, the necking even fracture was realized. Three types of cruciform specimen with different geometrical shape of thinning center region were presented, and the homogeneous distribution of stress, the appearance of largest deformation and the avoidence of stress concentration in the center region were analysed. A mathematical method was discussed to calculate the stress in the center region. The result shows that the cruciform specimen with square thinning center region is the superior device for the investigation of forming limit stress diagram(FLSD) to obtain the more homogeneous stress distribution in the center region, to realize the large deformation and the fracture appears in the center region more easily, and to control the stress concentration preferably.
- forming limit /
- limit stress /
- complex strain paths /
- cruciform specimen /
- biaxial tensile test

HTML全文

参考文献(1)

[1] 万敏, 周贤宾. 复杂加载路径下板料屈服强化与成形极限的研究进展[J]. 塑性工程学报,2000,2(7):35-39 Wan Min, Zhou Xianbin. Research progress on the yielding, hardening and forming limit of sheet metals under complex loading paths[J]. Journal of Plastic Engineering, 2000,2(7):35-39(in Chinese) [2] Brunet M, Mguil S, Morestin F. Analytical and experimental studies of necking in sheet metal forming processes[J]. J Mater Process Tech,1998,80/81:40-46 [3] Arrieux R, Bedrin C, Boivin M. Determination of an intrinsic forming limit stress diagram for isotropic sheets 12th Biennial Congress-International Deep Drawing Research Group. Milan:Assoc Italiana di Metallurgia,1982:61-71 [4] Stoughton T B. A general forming limit criterion for sheet metal forming[J]. Int J Mech Sci,2000,42:1-27 [5] 谢英, 万敏, 韩非. 板料成形极限应力图研究[J]. 机械工程学报,2005,41(7):45-49 Xie Ying, Wan Min, Han Fei. The investigation of FLSD of sheet metals[J]. Chinese Journal of Mechanical Engineering, 2005, 41(7):45-49(in Chinese) [6] 吴向东. 不同加载路径下各向异性板料塑性变形行为的研究 . 北京:北京航空航天大学机械工程及自动化学院, 2004 Wu Xiangdong. Research on the plastic deformation behavior of anisotropic sheet metal under different loading paths . Beijing:School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, 2004(in Chinese) [7] Moondra S, Kinsey B L. Determination of cruciform specimen for stress based failure criterion evaluation[J]. Transactions of NAMRI/SME, 2004,32:247-254 [8] Demmerle S, Boehler J P. Optimal design of biaxial tensile cruciform specimens[J]. Journal of Mechanics and Physics of Solids,1993,41(1):143-181 [9] Yu Y, Wan M, Wu X D, et al. Design of a cruciform biaxial tensile specimen for limit strain analysis by FEM[J]. Journal of Materials Processing Technology,2002,123(1):67-70 [10] Wu X D, Wan M, Zhou X B. Biaxial tensile test of cruciform specimen under complex loading[J]. Journal of Materials Processing Technology,2005,168:181-183

施引文献

资源附件(0)

访问统计