一种磁悬浮飞轮用新型永磁偏置径向磁轴承

房建成; 孙津济

一种磁悬浮飞轮用新型永磁偏置径向磁轴承

北京航空航天大学仪器科学与光电工程学院, 北京 100083

基金项目: 国防科工委民用航天预研资助项目(科工计[2001]894号)

详细信息

作者简介:
房建成(1965-),男,山东临沂人,教授,fangjiancheng@buaa.edu.cn.

中图分类号: TH 133.3
计量
- 文章访问数: 3505
- HTML全文浏览量: 97
- PDF下载量: 1065
- 被引次数: 0
出版历程
- 收稿日期: 2006-04-30
- 网络出版日期: 2006-11-30

New permanent magnet biased radial magnetic bearing in magnetic suspending flywheel application

School of Instrument Science and Opto-electronics Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 为了克服现有永磁偏置径向混合磁轴承的缺陷,提出了一种磁悬浮飞轮用新型永磁偏置径向混合磁轴承,分析了其工作原理,并分别利用等效磁路法及有限元方法对该永磁偏置径向混合磁轴承进行了电磁分析.分析结果表明:所提出的新型永磁偏置径向混合磁轴承采用永磁磁场作为偏置磁场,并且其永磁磁路与电励磁磁路在任一径向截面中共面,可使磁轴承轴向长度大为减小,与现有永磁偏置径向混合磁轴承相比具有体积更小的优点,同时该种永磁偏置径向混合磁轴承产生的偏置磁场在X,Y方向上不会产生耦合,可使控制更加容易,特别适用于高速、低功耗等场合.
- 径向混合磁轴承 /
- 永磁偏置 /
- 电磁分析
Abstract: To overcome the defects of the present permanent magnet biased radial hybrid magnetic bearing, a new permanent magnet biased radial hybrid magnetic bearing in magnetic suspending flywheel application is reported. The fundamental principle of the radial magnetic bearing is presented. And the radial magnetic bearing are analyzed and calculated by using the equivalent magnet circuit and finite element method (FEM). As a matter of fact, the flux of permanent magnet and electromagnetic occur in any radial plane, so the axial length of the radial magnetic bearing will be less. Therefore, the presented radial magnetic bearing has smaller volume compared to the existing structure. In addition, there is no coupling between X and Y direction so that the control is easier. It is more applied to the high speed or low loss occasions.
- radial hybrid magnetic bearing /
- permanent magnet biased /
- electromagnetic analysis

HTML全文

参考文献(1)

[1] Zmood R B, Qin L J, Kirk J A, et al. A magnetic bearing system design methodology and its application to a 50Wh open core composite flywheel Energy Conversion Engineering Conference. Proceedings of the 32nd Intersociety. Hawii:Holulu Press, 1997:2306-2311 [2] 朱熀秋, 邓智泉, 袁寿其, 等. 永磁偏置径向-轴向磁悬浮轴承工作原理和参数设计 [J] . 中国电机工程学报, 2002, 22(9):54-58. Zhu Huangqiu, Deng Zhiquan, Yuan Shouqi, et al. The working principle and parameter design for permanent magnet biased radial-axial direction on magnetic bearing [J]. Proceedings of the CSEE, 2002, 22(9):54-58(in Chinese) [3] 李冰, 邓智泉, 严仰光. 一种新颖的永磁偏置三自由度电磁轴承[J]. 南京航空航天大学学报,2003,35(1):81-85 Li Bing, Deng Zhiquan, Yan Yangguang. Permanent magnet biased electromagnetism bearing with three degrees of freedom[J]. Journal of Nanjing University of Aeronautics & Astronautic, 2003, 35(1):81-85(in Chinese) [4] Zhilicher Y. Analysis of a magnetic bearing pair with a permanent magnet excitation [J] . IEEE Transactions on Magnetics, 2000, 36(5):3690-3692 [5] 王怀颖. 永磁偏置的磁力轴承的研究[J]. 南京师范大学学报(工程技术版), 2003, 3(1):38-41 Wang Huaiying. Research on mixed-magnetic force bearings with permanent magnets Producing Biased Force[J]. Journal of Nanjing Normal University (Engineering and Technology), 2003, 3(1):38-41(in Chinese) [6] Reisinger M, Amrhein W. Silber S. Development of a low cost permanent magnet biased bearing Lyndon Scott Stephens,David L Trumper. Proc 9th Int Symp Magnetic Bearings. Kentucky:University of Kentucky Bearings and Seals Laboratory, 2004:113-118 [7] 谢志意, 许珍, 王艇. 三相径向混合磁轴承的结构设计与磁路分析[J].机械与电子,2005(6):20-23 Xie Zhiyi, Xu Zhen, Wang Ting. Construction design and magnetic circuit analysis of three phase radial hybrid magnetic bearing [J]. Machinery & Electronics, 2005,(6):20-23(in Chinese) [8] 孙津济, 房建成, 韩邦成. 一种永磁偏置外转子径向磁轴承:中国, 200510086223.5 . 2005-08-11 Sun Jinji, Fang Jiancheng, Han Bangcheng. A permanent magnet biased radial bearing with external rotor:China, 200510086223.5 . 2005-08-11(in Chinese) [9] 顿月芹, 徐衍亮. 一种新型转子磁体永磁偏置混合磁轴承 [J] . 山东大学学报(工学版), 2004,34(5):46-50 Dun Yueqin, Xu Yanliang. A new hybrid-type permanent magnet biased magnetic bearing with rotor magnet [J]. Journal of Shandong University (Engineering Science), 2004, 34(5):46-50(in Chinese) [10] Xu Yanliang, Dun Yueqin, Wang Xiuhe. Analysis of hybrid magnetic bearing with a permanent magnet in the rotor by FEM [J] . IEEE Transactions on Magnetics, 2006, 42(4):1363-1366

施引文献

资源附件(0)

访问统计