[1] |
华清.电液负载模拟器的关键技术研究[D].北京:北京航空航天大学,2001 Hua Qing.Study on the key technology of electro-hydraulic load simulator[D].Beijing:Beijing University of Aeronautics and Astronautics,2001(in Chinese)
|
[2] |
李成功,靳红涛,焦宗夏.电动负载模拟器多余力矩产生机理及抑制[J].北京航空航天大学学报,2006,32(2):204-208 Li Chenggong,Jin Hongtao,Jiao Zongxia.Mechanism and suppression of extraneous torque of motor driver load simulator[J].Journal of Beijing University of Aeronautics and Astronautics,2006,32(2):204-208(in Chinese)
|
[3] |
Jiao Z X,Gao J X,Hua Q,et al.The velocity synchronizing control on the electro-hydraulic load simulator[J].Chinese Journal of Aeronautics,2004,17(1):39-46
|
[4] |
Li Y H.Development of hybrid control of electrohydraulic torque load simulator[J].ASME Transaction Dynamic Systems Measurement and Control,2002,124(3):415-419
|
[5] |
Plummer A R.Robust electrohydraulic force control[J].Proceedings of the Institution of Mechanical Engineers,Part I:Journal of Systems and Control Engineering,2007,221(2):717-731
|
[6] |
Mare J C.Dynamic loading systems for ground testing of high sp- eed aerospace actuators[J].Aircraft Engineering and Aerospace Technology,2006,78(4):275-282
|
[7] |
王祖温.气压位置控制系统研究与展望[J].机械工程学报,2003,39(12):10-16 Wang Zuwen.Pneumatic position control system and prospects[J].Chinese Journal of Mechnical Engineering,2003,39(12):10-16(in Chinese)
|
[8] |
柏艳红.气动旋转位置伺服控制技术的研究[D].南京:南京理工大学,2006 Bai Yanhong.Research on pneumatic rotation position servo control technology[D].Nanjing:Nanjing University of Science and Technology,2006(in Chinese)
|
[9] |
Wei Q,Jiao Z X.Modeling and analysis of pneumatic loading system[C]//2011 International Conference on Fluid Power and Mechatronics.Piscataway,NJ:IEEE,2011:642-646
|
[10] |
冯小强.被动式气动负载模拟器研究[D].哈尔滨:哈尔滨工业大学,2006 Feng Xiaoqiang.Study of the pneumatic load simulator[D].Harbin:Harbin Institute of Technology,2006(in Chinese)
|
[11] |
方强.被动式力矩伺服控制系统设计方法及应用研究[D].哈尔滨:哈尔滨工业大学,2009 Fang Qiang.Research on design method for passive torque servo control system and its application[D].Harbin:Harbin Institute of Technology,2009(in Chinese)
|
[12] |
王兴坚.电动加载系统的控制理论与关键技术研究[D].北京:北京航空航天大学,2012 Wang Xingjian.Study on control theorem and key technique of electric loading system[D].Beijing:Beijing University of Aeronautics and Astronautics,2012(in Chinese)
|
[13] |
蔡茂林.气动元件的流量特性[J].液压气动和密封,2007,27(2):23-30 Cai Maolin.The flow characteristics of pneumatic coponents[J].Hydraulic Pneumatic & Seals,2007,27(2):23-30(in Chinese)
|
[14] |
蔡茂林.固定容器的充气与放气[J].液压气动和密封2007,27(3):5-21 Cai Maolin.A fixed capacity charge-discharge gas chamber[J].Hydraulic Pneumatic & Seals,2007,27(3):15-21(in Chinese)
|
[15] |
Richer E,Hurmuzlu Y.A high performance pneumatic force actuator system:part I-nonlinear mathematical model[J].ASME Journal Dynamic Systems:Measurement and Control 2000,122(3):416-425
|