150kV/30kW逆变式电子束焊接高压电源设计

张伟; 杜慧聪; 齐铂金; 许海鹰

doi:10.13700/j.bh.1001-5965.2013.0715

150kV/30kW逆变式电子束焊接高压电源设计

doi: 10.13700/j.bh.1001-5965.2013.0715

1.
北京航空航天大学机械工程及自动化学院, 北京 100191
2. 中国航空工业集团公司北京航空制造工程研究所, 北京 100024

基金项目: 工业和信息化部科技重大专项资助项目(2010ZX04007-041);北京市科技计划资助项目(D131100002813002)

详细信息

作者简介:
张伟(1977-),男,四川自贡人,讲师,zhangweibh@buaa.edu.cn

通讯作者:
齐铂金

中图分类号: TG439.3
计量
- 文章访问数: 1453
- HTML全文浏览量: 216
- PDF下载量: 826
- 被引次数: 0
出版历程
- 收稿日期: 2013-12-05
- 网络出版日期: 2014-11-20

150kV/30kW inverter for electron beam welding power supply design

1.
School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
2. Beijing Aeronautical Manufacturing Technology Research Institute, Aviation Industry Corporation of China, Beijing 100024, China

摘要

摘要: 针对150kV/30kW电子束焊接高压电源高电压、大功率输出的要求,低压电路采用IGBT (Insulated Gate Bipolar Transistor)逆变隔离直流电源与逆变全桥串联的主电路拓扑,高压电路由3组升压变压器与10倍压整流电路的串联结构并联组成;设计了高压采样电路、束流采样电路,以及双闭环控制电路.基于上述技术,实现了150kV/30kW高电压大功率输出.实验结果表明高压加速电源的输出线性度和束流输出线性度较好,同时高压稳定度和束流稳定度均在0.5%左右,能够满足电子束焊接的要求.
- 电子束焊接 /
- 高压电源 /
- 逆变 /
- 高频变压器 /
- 倍压整流
Abstract: With the consideration of characteristics of high voltage and high power output of 150kV/30kW power supply of electron beam welding (EBW), low-voltage circuit was designed to be composed of insulated gate bipolar transistor (IGBT) isolated DC power supply and full bridge inverter in series, and high-voltage circuit was paralleled by three groups of high-voltage transformer with 10 times voltage doubling rectifier circuit in series. At the same time, high voltage sampling circuit, electron beam current sampling circuit, and dual closed-loop control circuit were proposed. Based on the above technologies, the 150kV/30kW electron beam welding power supply was successfully developed. Experimental results show that the linearity of output voltage and output beam current of high-voltage accelerating power supply is excellent, the stability of output voltage and output beam current of high-voltage accelerating power supply is about 0.5%, which could satisfy the EBW requirements.
- electron beam welding (EBW) /
- high-voltage power supply /
- inverter /
- high frequency transformer /
- voltage doubling rectifier

HTML全文

参考文献(16)

[1]	叶汉民.电子束焊机用高压电源的应用及发展趋势[J].电源技术应用,2001(10):519-522 Ye Hanmin.Application and developing trend of high voltage power supply for electronic beam welder[J].Power Supply Technologies and Applications,2001(10):519-522(in Chinese)
[2]	Malik P,Agrawal P.A neural networks based controller for electron beam welding power supply[C]//Power Electronics,Drives and Energy Systems(PEDES) & 2010 Power India,Joint International Conference.Piscataway,NJ:IEEE Computer Society,2010:1-5
[3]	Li Z X,Wang Z T,Fan S W.Development of high frequency and high voltage source for electronic beam welder[J].Journal of North China University of Technology,2010,22(3):16-19
[4]	He S J,Mo J H,Wei S Q,et al.Design of a novel PWM boost type EBW stabilized high voltage source[C]//International Conference on Communications,Circuits and Systems.Piscataway,NJ:IEEE Computer Society,2008:1292-1296
[5]	赵卫东,王俊峰,孙建坤.电子束焊接用高压直流电源设计[J].安徽工业大学学报,2010,27(3):295-298 Zhao Weidong,Wang Junfeng,Sun Jiankun.Design of hign-volltage power supply for electron beam welding[J].Journal of Anhui University of Technology,2010,27(3):295-298(in Chinese)
[6]	李正熙,王泽庭,樊生文.高频高压电子束焊机电源的研制[J].北方工业大学学报,2010,22(3):16-18 Li Zhengxi,Wang Zeting,Fan Shengwen.Development of high frequency and high voltage source for electronic beam welder [J].Journal North China University of Technology,2010,22(3):16-18(in Chinese)
[7]	李亚江,王娟,刘鹏.特种焊接技术及应用[M].北京:化学工业出版社,2003:43-46 Li Yajiang,Wang Juan,Liu Peng.Special welding technology and application[M].Beijing:Chemical Industry Press,2003:43-46(in Chinese)
[8]	李爱文,张成慧.现代逆变技术及应用[M].北京:科学出版社,2000:162 Li Aiwen,Zhang Chenghui.Modern inverter technology and application[M].Beijing:Science Press,2000:162(in Chinese)
[9]	徐国宁,齐铂金,刘方军,等.新型电子束焊机阴极加热电源自动调节系统[J].北京航空航天大学学报,2012,38(3):380-383 Xu Guoning,Qi Bojin,Liu Fangjun,et al.New automatic regulation system of electron beam welder cathode heating source[J].Journal of Beijing University of Aeronautics and Astronautics,2012,38(3):380-383(in Chinese)
[10]	齐铂金,徐国宁,刘方军,等.新型脉冲电子束焊接偏压电源设计[J].北京航空航天大学学报,2012,38(10):1311-1316 Qi Bojin,Xu Guoning,Liu Fangjun,et al.Pulsed electron beam welding grid power supply design[J].Journal of Beijing University of Aeronautics and Astronautics,2012,38(10):1311-1316(in Chinese)
[11]	林志琦,郎永辉,王岩,等.倍压整流电路电容参数的优化设计[J].长春工业大学学报,2009,30(5):551-555 Lin Zhiqi,Lang Yonghui,Wang Yan,et al.Optimized design of noltage doubing rectifiers[J].Journal of Changchun University of Technology,2009,30(5):551-555(in Chinese)
[12]	孙淑惠.倍压整流电路原理仿真及应用[J].机床电器,2009(2):8-10 Sun Shuhui.Simulation and application of principles in multiple voltages rectifying circuit [J].Machine Tool Electric Apparatus,2009(2):8-10(in Chinese)
[13]	陈翔,王丛岭,杨平,等.倍压整流电路参数分析与设计[J].科学技术与工程,2012,12(29):7732-7735 Chen Xiang,Wang Congling,Yang Ping,et al.Parameter analysis and design of voltage doubling rectifier circuit[J].Science Technology and Engineering,2012,12(29):7732-7735(in Chinese)
[14]	何少佳,李建玲,莫金海,等.电子束焊机电源控制系统的设计与实现[J].焊接学报,2012,33(1):1-5 He Shaojia,Li Jianling,Mo Jinhai,et al.Design and implementation of a power control system for electron beam welder [J].Transactions of the China Welding Institution,2012,33(1):1-5(in Chinese)
[15]	许海鹰,余伟,左从进.高压脉冲电子束焊的控制及其对焊缝形貌影响[J].北京航空航天大学学报,2011,37(8):1044-1048 Xu Haiying,Yu Wei,Zuo Congjin.High voltage pulse electron beam control strategy and influence on weld bead shape[J].Journal of Beijing University of Aeronautics and Astronautics,2011,37(8):1044-1048(in Chinese)
[16]	韦寿祺,莫金海,何少佳.大功率电子束轰击炉电子枪电源控制策略[J].真空科学与技术学报,2007,28(2):151-152 Wei Shouqi,Mo Jinhai,He Shaojia.Modification of high power electron beam bombardment furnace [J].Chinese Journal of Vacuun Science and Technology,2007,28(2):151-152(in Chinese)