复合材料结构组件抗坠毁试验与渐进失效分析

罗海波; 燕瑛; 孟祥吉; 梁祖典; 侯康; 宫少波

doi:10.13700/j.bh.1001-5965.2014.0008

复合材料结构组件抗坠毁试验与渐进失效分析

doi: 10.13700/j.bh.1001-5965.2014.0008

1.
北京航空航天大学航空科学与工程学院, 北京 100191
2. 哈尔滨飞机工业集团有限责任公司, 哈尔滨 150066

基金项目: 国家973 计划资助项目(2011CB606105)

详细信息

作者简介:
罗海波(1986-),男,重庆人,博士生,x301860@126.com.

中图分类号: TB332;O347.1
计量
- 文章访问数: 925
- HTML全文浏览量: 39
- PDF下载量: 749
- 被引次数: 0
出版历程
- 收稿日期: 2014-01-09
- 网络出版日期: 2014-12-20

Progressive failure analysis and crashworthiness experiment for composite structural discreteness

1.
School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
2. Corporation of Harbin Aircraft Industry Group, Harbin 150066, China

摘要

摘要: 对复合材料吸能结构盒段进行了耐撞性(crashworthiness)试验研究,得到吸能所关心的载荷-位移曲线,并获得相应的平均载荷、峰值载荷以及吸收总能量相关吸能参数.考虑复合材料的各向异性本构关系,对有限元软件进行了二次开发.考虑含刚度退化的Hashin失效准则对结构组件进行渐进失效数值分析讨论.基于扩展的失效准则,设置相应的渐进削弱式的薄弱环节,模拟得到了吸能评价参数平均载荷值,数值计算得到的平均载荷值为361.10 kN.并与试验结果进行了比较,其相对误差不超过7%,计算结果与试验结果取得较好一致性,表明这种方法模拟分析结构组件抗坠毁是有效可行的.
- 复合材料结构组件 /
- 失效准则 /
- 渐进失效 /
- 平均载荷 /
- 数值分析
Abstract: The experimental crashworthiness research on energy-absorbing discrete structures of composite was carried out. The corresponding energy absorption load-displacement curves, the average load, the peak load and the total energy-absorbing parameters were all obtained. Considering the anisotropic constitutive relation of composites, the secondary development of the finite element software was applied. Considering the Hashin failure criterion with the stiffness degradation theory included, the progressive failure numerical analysis was discussed for the structural discreteness. Based on the extended failure criterion, a gradually weakness of layup triggers links style was set up respectively, also the average load of energy-absorbing evaluation parameter was obtained by numerical simulation, which is 361.10 kN. Compared with the experimental results, the relative error is less than 7%, and the numerical simulation results agree well with those of the experiments, which indicate the feasibility and effectiveness of this method to estimate the crashworthiness of composite structural discreteness.
- composite discreteness structure /
- failure criterion /
- progressive failure /
- average load /
- numerical analysis

HTML全文

参考文献(15)

[1]	倪先平,王永亮,荚淑萍,等.直升机机身下部复合材料典型结构耐坠特性研究[J].复合材料学报,2003,20(4):51-57 Ni Xianping,Wang Yongliang,Jia Shuping,et al.Analysis of crash impact behavior of typical composite components of helicopter bottom structure[J].Acta Materiae Compositae Sinica,2003,20(4):51-57(in Chinese)
[2]	Farley G L.Effect of fiber and matrix maximum strain on the energy absorption of composite materials[J].Journal of Composite Materials,1986,20(4):322-334
[3]	Farley G L,Jones R M.Analogy for the effect of material and geometrical variables on energy-absorption capability of composite tubes[J].Journal of Composite Materials,1992,26(1):78-89
[4]	Thornton P H,Jeryan R A.Crash energy management in compos- ite automotive structures[J].International Journal of Impact Engineering,1988,7(2):167-180
[5]	Okano M,Sugimoto K,Saito H,et al.Effect of the braiding angle on the energy absorption properties of a hybrid braided FRP tube[J].Proceedings of the Institution of Mechanical Engineers,Part L:Journal of Materials Design and Applications,2005,219(1):59-66
[6]	Kindervater C M.Energy absorption of composites as an aspect of aircraft structural crash resistance[C]//European Conference on Composite Materials.Stuttgart:[s.n.],1990:643
[7]	Sokolinsky V S,Indermuehle K C,Hurtado J A.Numerical simulation of the crushing process of a corrugated composite plate[J].Composites:Part A,2011,42(9):1119-1126
[8]	Jiménez M A,Miravete A,Larrodé E,et al.Effect of trigger geometry on energy absorption in composite profiles[J].Composite Structures,2000,48(1):107-111
[9]	龚俊杰,王鑫伟,王新峰.可控薄弱环节复合材料圆柱壳的耐撞性研究[J].应用力学学报,2010,27(2):243-249 Gong Junjie,Wang Xinwei,Wang Xinfeng.Crashworthiness research of controllable weaknesses for composite cylindrical shells[J].Chinese Journal of Applied Mechanics,2010,27(2):243-249(in Chinese)
[10]	Hanagud S,Craig J I,Sriram P,et al.Energy absorption behavior of graphite epoxy composite sine webs[J].Journal of Composite Materials,1989,23(5):448-459
[11]	龚俊杰,王鑫伟.复合材料波纹梁盒段耐撞性的数值模拟[J].应用力学学报,2007,24(1):165-168 Gong Junjie,Wang Xinwei.Numerical simulation to crashworthiness of composite corrugated board boxes[J].Chinese Journal of Applied Mechanics,2007,24(1):165-168(in Chinese)
[12]	Hashin Z.Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics,Transactions ASME,1980,47(2):329-334
[13]	Matzenmiller A,Lubliner J,Taylor R L.A constitutive model for anisotropic damage in fiber-composites[J].Mechanics of Materials,1995,20(2):125-152
[14]	Lapczyk I,Hurtado J A.Progressive damage modeling in fiber-reinforced materials[J].Composites Part A:Applied Science and Manufacturing,2007,38(11):2333-2341
[15]	Maimi P,Camanho P P,Mayugo J A,et al.A thermo dynamically consistent damage model for advanced composites[R].NASA/TM-2006-214282,2006