具有变胞功能的自主移动制孔机构

王珉; 王谢苗; 陈文亮; 丁力平

doi:10.13700/j.bh.1001-5965.2014.0242

具有变胞功能的自主移动制孔机构

doi: 10.13700/j.bh.1001-5965.2014.0242

南京航空航天大学机电学院, 南京 210016

基金项目: 国家自然科学基金资助项目(51105200)

详细信息

作者简介:
王珉(1975—),男,山东蓬莱人,讲师,wangm@nuaa.edu.cn

通讯作者:
陈文亮(1966—),男,浙江义乌人,教授,cwlme@nuaa.edu.cn,主要研究方向为飞机装配技术.

中图分类号: V19;TP242.2
计量
- 文章访问数: 1201
- HTML全文浏览量: 112
- PDF下载量: 749
- 被引次数: 0
出版历程
- 收稿日期: 2014-04-30
- 网络出版日期: 2015-03-20

Autonomous mobile drilling mechanism with metamorphic function

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China

摘要

摘要: 根据飞机自动化装配的应用需求,结合变胞原理提出了一种双偏心变胞源机构.在此基础上设计了一种具有变胞功能的自主移动制孔机构,能实现行走和调姿制孔两种功能阶段之间的变自由度切换.给出了调姿过程由初始状态经俯仰与侧滚后到达期望法矢位置各足驱动量的运动学反解算法,可用于实时控制.运用Matlab绘出了实际工况下反解算法中各足偏移量区域,完成了双偏心变胞源机构的尺寸设计.建立虚拟样机,联合算例进行运动学仿真,结果验证了运动学算法和双偏心变胞源机构适用于本机构.研制了实物样机,测试了系统的调姿精度,结果表明可满足飞机装配自动化制孔的要求.
- 飞机装配 /
- 变胞 /
- 自主移动 /
- 运动学反解 /
- 双偏心
Abstract: According to the application requirements of aircraft automatic assembly and the principle of metamorphic mechanism, a double eccentric source metamorphic mechanism was presented. On the basis, a autonomous mobile drilling mechanism with metamorphic function was designed, and the switching of changing freedom between the two functional stages of walking and posture alignment drilling. The calculation method of inverse kinematics was provided, which could calculate the driven displacement of legs during the posture alignment process which changed from initial to desired normal direction by pitching and side roll. This could be used to the online control. The offset domain of inverse arithmetic of each leg in working conditions were plotted by Matlab, and the dimensional designing of double eccentric source metamorphic mechanism was achieved. The virtual prototype model was established, and the kinematics simulation was carried out by using examples. The results confirmed that the kinematics calculation method and the double eccentric source metamorphic mechanism were applicable for the mechanism. The prototype of mechanism was developed, and the posture alignment accuracy of the system was tested. The result shows that the mechanism can meet the drilling requirements of the aircraft automatic assembly.
- aircraft assembly /
- metamorphic /
- autonomous mobile /
- inverse kinematics /
- double eccentric

HTML全文

参考文献(22)

[1]	DeVlieg R, Sitton K,Feikert E,et al.ONCE(one sided cell end effector) robotic drilling system,2002-01-2626[R].USA:SAE,2002.
[2]	Atkinson J, Hartmann J,Jones S,et al.Robotic drilling system for 737 aileron,2007-01-3821[R].USA:SAE,2007
[3]	Branko S. Assembly techniques for space vehicles,2000-01-3028[R].USA:SAE,2001.
[4]	许国康. 大型飞机自动化装配技术[J].航空学报,2008,29(3): 734-740. Xu G K.Automatic assembly technology for large aircraft[J].Acta Aeronautica et Astronautica Sinica,2008,29(3):734-740(in Chinese).
[5]	Marguet B, Cibiel C,De Francisco Ó.Crawler robots for drilling and fastener installation: an innovative breakthrough in aerospace automation,2008-01-2292[R].USA:SAE,2008
[6]	刘冬,赵现朝, 齐臣坤.行走·定位一体化飞机制孔六足机器人研究[J].机械设计与研究,2012,28(6):53-55. Liu D,Zhao X Z,Qi C K.Research on walking-positioning integrated hexapod robot for drilling aircraft component[J].Machine Design and Research,2012,28(6):53-55(in Chinese).
[7]	王启申,袁培江, 王田苗,等.航空制孔末端执行器中调姿机构的设计与实验[J].北京航空航天大学学报,2014,40(7):988-993. Wang Q S,Yuan P J,Wang T M,et al.Design and experiment of an adjusting mechanism in aviation drilling end effector[J].Journal of Beijing University of Aeronautics and Astronautics,2014,40(7):988-993(in Chinese).
[8]	王珉,陈文亮, 张得礼,等.飞机轻型自动化制孔系统及关键技术研究[J].航空制造技术,2012(19):40-43.Wang M,Chen W L,Zhang D L,et al.Light-weight automatic drilling system and key technology for aircraft[J].Aeronautical Manufacturing Technology,2012(19):40-43(in Chinese).
[9]	Dai J S, Rees J J.Mobility in metamorphic mechanisms of foldable/erectable kinds[J].Transactions of ASME,Journal of Mechanical Design,1999,121(3):375-382.
[10]	Dai J S, Zhang Q X.Metamorphic mechanisms and their configuration models[J].Chinese Journal of Mechanical Engineering,2000,13(3):212-218.
[11]	Li D L, Dai J S,Sun H.Configuration based synthesis of a Carton-like metamorphic mechanism of foldable and erectable[J].Journal of Engineering Design,2005,16(4):375-386.
[12]	王德伦,戴建生. 变胞机构及其综合的理论基础[J].机械工程学报,2007,43(8):32-42. Wand D L,Dai J S.Theoretical foundation of metamorphic mechanism and its synthesis[J].Chinese Journal of Mechanical Engineering,2007,43(8):32-42(in Chinese).
[13]	Dai J S, Rees J J.Matrix representation of topological changes in metamorphic mechanisms[J].ASME Transaction:Journal of Mechanical Design,2005,127(4):675-682.
[14]	刘川禾. 变拓扑机构结构组成理论[J].机械工程学报,2012,48(19):52-58. Liu C H.Structure composition theory of variable topology mechanisms[J].Journal of Mechanical Engineering,2012,48(19): 52-58(in Chinese).
[15]	Dai J S, Wang D L.Geometric analysis and synthesis of the metamorphic robotic hand[J].Journal of Mechanical Design,2007,129(11):1191-1196.
[16]	Wang Z Y, Ding X L,Xie Y W.Conceptual design of a novel robotics system for planetary exploration[C]//Proceedings of the 6th World Congress on Intelligent Control and Automation.Piscataway,NJ:IEEE Computer Society,2006:8962-8965.
[17]	杨廷力,刘安心, 罗玉峰,等.机器人机构拓扑结构设计[M].北京:科学出版社,2012:138-150. Yang T L,Liu A X,Luo Y F.Theory and application of robot mechanism topology[M].Beijing:Beijing Science Press,2012:138-150(in Chinese).
[18]	Zhang L P, Wang D L,Dai J S.Biological modeling and evolution based synthesis of metamorphic mechanisms[J].Journal of Mechanical Design,2008,130(7):07230301-07230310.
[19]	Tian W, Zhou W X,Zhou W.Auto-normalization algorithm for robotic precision drilling system in aircraft component assembly[J].Chinese Journal of Aeronautics,2013,26(2):495-500.
[20]	王珉,薛少丁, 陈文亮,等.面向飞机自动化装配的单向压紧制孔毛刺控制技术[J].航空制造技术,2011(9):26-29. Wang M,Xue S D,Chen W L,et al.One-side pressed burrless drilling technology for aircraft automatic assembly[J].Aeronautical Manufacturing Technology,2011(9):26-29(in Chinese).
[21]	黄真,赵勇生, 赵铁石.高等空间机构学[M].北京:高等教育出版社,2006:118-127. Huang Z,Zhao Y S,Zhao T S.Advanced spatial mechanism[M].Beijing:Higher Education Press,2006:118-127(in Chinese).
[22]	谢志江,孙小勇, 孙海生,等.低速风洞动态试验的高速并联机构设计及动力学分析[J].航空学报,2013,34(3):487-494. Xie Z J,Sun X Y,Sun H S,et al.Mechanism design and dynamics analysis of high speed parallel robot for dynamic test in low speed wind tunnel[J].Acta Aeronautica et Astronautica Sinica,2013,34(3):487-494(in Chinese).