面向机身柔性装配的在线编程技术

武锋锋; 李东升; 王亮

doi:10.13700/j.bh.1001-5965.2014.0256

面向机身柔性装配的在线编程技术

doi: 10.13700/j.bh.1001-5965.2014.0256

北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目: 国防基础科研资助项目

详细信息

作者简介:
武锋锋(1983—),女,山西洪洞人,博士生,wffqll00@163.com

通讯作者:
李东升(1965—),男,甘肃静宁人,教授,lidongs@buaa.edu.cn,主要研究方向为现代飞机制造工艺与先进装备、航空钣金数字化制造与钛合金构件精密成形技术和超大型曲面的超精密柔性成形制造理论与应用技术.

中图分类号: V262.1
计量
- 文章访问数: 1177
- HTML全文浏览量: 256
- PDF下载量: 563
- 被引次数: 0
出版历程
- 收稿日期: 2014-05-08
- 修回日期: 2014-08-25
- 网络出版日期: 2015-04-20

Online programming technique for flexible assembly of fuselage

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 为满足机身数字化装配的“一架多型”和“一架多态”深层次柔性需求,使“桥架式”柔性工装具有更好的自主适应能力,必须建立相应的运动学模型,通过在线编程技术合理地规划运动控制策略.针对机身定位形式与柔性工装特点建立了柔性工装运动学模型,研究了基于仿真模型的在线编程原理、装配基准点构建方式和运动控制策略规划技术,提出了结构功能结合工艺需求驱动的仿真环境创建方法.为快速生成运动控制指令,开发了面向机身柔性装配的在线编程系统.以某飞机后机身装配为例,验证了系统的精准性、高效性和超强自主适应能力.
- 机身 /
- 柔性装配 /
- 在线编程 /
- 自主适应 /
- 运动学模型 /
- 仿真
Abstract: In order to meet the deep flexible demands of “one fixture with more models” and “one fixture with more states” for digital assembly of fuselage, enable the “bridge-frame” flexible tooling to have better capacity for independent adaptability, its kinematic model must be set up and its movement controls strategy must be planned properly by online programming technique. For the locating styles of fuselage and the characteristics of flexible tooling, the kinematic model of flexible tooling was set up, then simulation model-based online programming disciplines, the way of building reference points for assembly and the technology of movement controls strategy planning were studied. The way of building a process-driven simulation environment based on structure function was proposed. In order to generate the codes quickly to control motion, the online programming system for flexible assembly of fuselage was developed. With the assembly of rear fuselage, for example , the accuracy, high efficiency and strong independent adaptability of this system were verified.
- fuselage /
- flexible assembly /
- online programming /
- independent adaptability /
- kinematic model /
- simulation

HTML全文

参考文献(18)

[1]	陈建平. 数字化柔性装配的飞机结构设计[J].科技创新与应用,2013(23):12. Chen J P.Aircraft structural design for digital flexible assembly[J].Technology Innovation and Application,2013(23):12(in Chinese).
[2]	Jonsson M, Ossbahr G.Aspects of reconfigurable and flexible fixtures[J].Production Engineering,2010,4(4):333-339.
[3]	Bi Y B, Yan W M,Ke Y L.Numerical study on predicting and correcting assembly deformation of a large fuselage panel during digital assembly[J].Assembly Automation,2014,34(2):204-216.
[4]	王亮,李东升, 罗红宇,等.飞机装配数控柔性多点工装技术及应用[J].北京航空航天大学学报,2010,36(5):540-544. Wang L,Li D S,Luo H Y,et al.Numerical control reconfigurable compliant tooling technology and application in aircraft assembly[J].Journal of Beijing University of Aeronautics and Astronautics,2010,36(5):540-544(in Chinese).
[5]	郭飞燕,王仲奇, 康永刚,等.基于坐标孔的数字化柔性工装定位技术[J].计算机集成制造技术,2013,19(4):720-726. Guo F Y,Wang Z Q,Kang Y G,et al.Locating technology in digital flexible tooling based on coordinate holes[J].Computer Integrated Manufacturing Systems,2013,19(4):720-726(in Chinese).
[6]	郭志敏,蒋君侠, 柯映林.基于POGO柱三点支撑的飞机大部件调姿方法[J].航空学报,2009,30(7):1319-1324. Guo Z M,Jiang J X,Ke Y L.Posture alignment for large aircraft parts based on three POGO sticks distributed support[J].Acta Aeronautica et Astronautica Sinica,2009,30(7):1319-1324(in Chinese).
[7]	Zhang B, Yao B G,Ke Y L.A novel posture alignment system for aircraft wing assembly[J].Journal of Zhejiang University:Science A,2009,10(11):1624-1630.
[8]	Zhu Y G, Huang X,Fang W.Trajectory planning algorithm based on quaternion for 6-DOF aircraft wing automatic position and pose adjustment method[J].Chinese Journal of Aeronautics,2010,23(6):707-714.
[9]	邱宝贵,蒋君侠, 毕运波,等.大型飞机机身调姿与对接试验系统[J].航空学报,2011,32(5):908-919. Qiu B G,Jiang J X,Bi Y B,et al.Posture alignment and joining test system for large aircraft fuselages[J].Acta Aeronautica et Astronautica Sinica,2011,32(5):908-919(in Chinese).
[10]	王建华,欧阳佳, 陈文亮.飞机柔性装配工装关键技术及发展趋势[J].航空制造技术,2013(17):49-52. Wang J H,Ouyang J,Chen W L.Key technology and development of flexible assembly tool for aircraft[J].Aeronautical Manufacturing Technology,2013(17):49-52(in Chinese).
[11]	Kihlman H, Engström M.Flexible fixtures with low cost and short lead-time,2007-01-3797[R].Warrendale:SAE,2007.
[12]	Millar A, Kihlman H.Reconfigurable flexible tooling for aerospace wing assembly,2009-01-3243[R].Warrendale:SAE, 2009.
[13]	Kihlman H, Engstrom M.Flexapods-flexible tooling at SAAB for building the NEURON aircraft,2010-01-1871[R].Warrendale:SAE,2010.
[14]	郭洪杰,康晓峰, 王亮,等.飞机部件装配数字化柔性工装技术研究[J].航空制造技术,2011(22):94-97. Guo H J,Kang X F,Wang L,et al.Research on flexible tooling technology for digital assembly of aircraft fuselage[J].Aeronautical Manufacturing Technology,2011(22):94-97(in Chinese).
[15]	袁立,郭洪杰. 一代飞机一代技术[J].航空制造技术,2012(23-24):38-41. Yuan L,Guo H J.New generation aircraft with new generation technology[J].Aeronautical Manufacturing Technology,2012(23-24):38-41(in Chinese).
[16]	Li Y G,Jian J B, Yan R J,et al.Aircraft tooling collaborative design based on multi-agent and PDM[J].Concurrent Engineering:Research and Applications,2009,17(2):139-146.
[17]	王亮,李东升. 飞机数字化装配柔性工装的低成本化[J].南京航空航天大学学报,2012,44(增刊1):27-31. Wang L,Li D S.Low cost of flexible tooling technology for aircraft digital assembly[J].Journal of Nanjing University of Aeronautics & Astronautics,2012,44(Supple.1):27-31(in Chinese).
[18]	王海宇. 飞机装配工艺学[M].西安:西北工业大学出版社,2012:7-31. Wang H Y.Aircraft assembly technology[M].Xi'an:Northwestern Polytechnical University Press,2012:7-31(in Chinese).