LY12CZ铝合金的代铬酸快速阳极氧化技术

姬振江; 朱立群; 刘慧丛; 李卫平

doi:10.13700/j.bh.1001-5965.2014.0352

LY12CZ铝合金的代铬酸快速阳极氧化技术

doi: 10.13700/j.bh.1001-5965.2014.0352

北京航空航天大学材料科学与工程学院, 北京 100191

基金项目: 国家自然科学基金(51101010)

详细信息

作者简介:
姬振江( 1990—),男,河南焦作人,硕士研究生,buaajj@gmail.com

通讯作者:
刘慧丛(1975—),女,河北无极人,副教授,liuhc@buaa.edu.cn,主要研究方向为材料表面的功能性涂镀层材料及其功能防护层的腐蚀过程与机理.

中图分类号: TG146.2
计量
- 文章访问数: 981
- HTML全文浏览量: 17
- PDF下载量: 571
- 被引次数: 0
出版历程
- 收稿日期: 2014-06-13
- 修回日期: 2014-07-17
- 刊出日期: 2015-05-20

Rapid anodizing technology replacing chromic acid for LY12CZ aluminum alloy

School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 通过在45 g/L的硫酸溶液中添加有机酸添加剂及快速成膜缓冲剂,以15~25 V的梯度电压方式对LY12CZ铝合金进行阳极氧化处理,获得一种代替铬酸阳极氧化、硼酸-硫酸阳极氧化工艺的铝合金新型环保快速阳极氧化工艺.对获得的氧化膜进行场发射扫描电子显微镜观察、耐点滴腐蚀试验、膜重试验以及疲劳性能测试.结果表明:有机酸、缓冲添加剂在铝合金硫酸阳极氧化成膜过程中可以缓冲硫酸对膜层的溶解,提高氧化膜层的致密性和耐腐蚀性能,同时降低了氧化过程对铝合金基体的疲劳损伤;另外,在15 V电压下氧化5 min再在25 V电压下氧化5 min,获得的氧化膜层性能与硼酸-硫酸工艺条件下15 V电压氧化20 min 所获得的膜层性能相当,其中的有机酸添加剂为YP添加剂,快速成膜缓冲剂为YJ缓冲剂.
- 铝合金 /
- 代铬酸 /
- 快速阳极氧化 /
- 耐蚀性 /
- 疲劳性能
Abstract: Aluminum alloy anodizing coatings were prepared for LY12CZ in 45 g/L sulfuric acid solution through adding organic acid additive and buffering agent for fast film-forming, with the gradient voltage of 15-25 V, to replace the traditional chromic acid anodizing and boric-sulfuric acid anodizing. The field emission scanning electron microscope, titrating test, coating mass test and fatigue test were used to evaluate the properties of the anodizing coatings. The results show that organic acid additive and buffering agent for fast film-forming can relieve the dissolution of anodizing coatings, improve the compactness and corrosion resistance and reduce the fatigue damage during the anodizing process. Moreover, the properties of coatings anodized in the new anodizing solution of sulfuric acid, organic acid and buffering agent with the voltage of 15 V for 5 min and of 25 V for 5 min are equal to ones anodized in boric-sulfuric acid with the voltage of 15 V for 20 min. Organic acid additive is YP additive and buffering agent for fast film-forming is YJ additive.
- aluminum alloy /
- replacing chromic acid /
- rapid anodizing /
- anti-corrosion /
- fatigue property

HTML全文

参考文献(18)

[1]	林钢,林慧国,赵玉涛.铝合金应用手册[M].北京:机械工业出版社,2006:1-10. Lin G,Lin H G,Zhao Y T.Application manual of aluminum alloys[M].Beijing:China Machine Press,2006:1-10(in Chinese).
[2]	朱立群.材料表面现代防护理论与技术[M].西安:西北工业大学出版社,2012:282-284. Zhu L Q.Modern protection theory and technology of material surface[M].Xi'an:Northwestern Polytechnical University Press,2012:282-284(in Chinese).
[3]	郑瑞庭.铝及其合金铬酸阳极氧化[J].电镀与精饰,2003,25(1): 3. Zheng R T.Anodizing of aluminum and its alloy inchromic acid solution[J].Plating and Finishing,2003,25(1):3(in Chinese).
[4]	王邈.铬酸阳极化和化学氧化处理对铝合金疲劳性能影响研究[J].上海涂料,2011,49(10):12-14. Wang M.Study on influence of chromic acid anodizing and chemical conversion coating to fatigue property of aluminum alloy[J].Shanghai Coatings,2011,49(10):12-14(in Chinese).
[5]	Critchlow G W,Yendall K A,Bahrani D,et al.Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys[J].International Journal of Adhesion and Adhesives,2006,26(6):419-453.
[6]	王帅星,赵晴,杜楠,等.铈盐对铝合金硼酸-硫酸阳极氧化膜的封闭效应[J].中国有色金属学报,2012,22(4):1132-1141. Wang S X,Zhao Q,Du N,et al.Sealing effect of cerium salt on boric-sulfuric acid anodic film of aluminum alloy[J].The Chinese Journal of Nonferrous Metals,2012,22(4):1132-1141(in Chinese).
[7]	刘佑厚,井玉兰.铝合金硼酸-硫酸阳极氧化工艺研究[J].电镀与精饰,2000,22(6):4. Liu Y H,Jing Y L.Research of anodize process on aluminum alloys in boric acid-sulfuric acid[J].Plating and Finishing,2000,22(6):4(in Chinese).
[8]	Wong C,Moji Y.Method for anodizing aluminum:US,4894127[P].1990-01-16.
[9]	Dattilo A,Romano C,Tamiro S. Anodizing process,with low environmental impact,for a woodpiece of aluminum or aluminum alloys:US,20020157961 A1[P].2002-10-31.
[10]	蔡健平,李斌,刘明辉,等.阳极化对航空铝合金疲劳性能的影响[J].航空材料学报,2007,27(2):4. Cai J P,Li B,Liu M H,et al.Effect of anodizing on fatigue performance of aeronautic aluminum alloys[J].Journal of Aeronautical Materials,2007,27(2):4(in Chinese).
[11]	赵军,朱建龙,薛花娟,等.阳极氧化对7075铝合金疲劳性能的影响[J].南京航空航天大学学报,2008,40(3):412-416. Zhao J,Zhu J L,Xue H J,et al.Effects of anodizing methods on behavior of 7075 aluminum alloy[J].Journal of Nanjing University of Aeronautics and Astronautics,2008,40(3):412-416(in Chinese).
[12]	刘建华,刘洲,于美,等.3种溶液体系下铝合金阳极氧化膜的性能[J].中国有色金属学报,2012,22(7):2031-2039. Liu J H,Liu Z,Yu M,et al.Properties of aluminum alloy anodic films formed in three kinds of solutions[J].The Chinese Journal of Nonferrous Metals,2012,22(7):2031-2039(in Chinese).
[13]	李凌杰,张胜涛.稀土盐对铝合金阳极化过程的影响[J].中国稀土学报,2001,19(4):350-353. Li L J,Zhang S T.Effect of rare earth salts on anodizing of aluminum alloy[J].Journal of The Chinese Rare Earth Society,2001,19(4):350-353(in Chinese).
[14]	ASTM B137—95 Standard test method for measurement of coating mass per unit area on anodically coated aluminum[S].West Conshohoken,PA:ASTM International,2014.
[15]	MIL-A-8625F Military specification:Anodic coating for aluminum and aluminum alloys[S].Washington,D.C.:Department of Defense,1993.
[16]	SJ 1276—77 金属镀层和化学处理层质量检验技术要求[S].1997. SJ1276—77 Metal plating and chemical treatment layer quality inspection technology requirements[S].1997(in Chinese).
[17]	ASTM E466—2007 Standard practice for conducting force controlled constant amplitude axial fatigue tests of metallic materials[S].West Conshohoken,PA:ASTM International,2007.
[18]	朱祖芳. 铝合金阳极氧化与表面处理技术[M].北京:化学工业出版社,2004:94-116. Zhu Z F.Aluminum alloy anodic oxidation and surface treatment technology[M].Beijing:Chemical Industry Press,2004:94-116(in Chinese).