Property assessment of PANS method for numerical simulation of flow around tandem cylinders
-
摘要: PANS方法以传统的雷诺平均Navier-Stokes(RANS)方程为模板,引入控制参数对原方程进行修改,是一类能够有效模拟分离湍流流动的混合方法.采用基于Menter 剪切应力输运(SST)湍流模型的PANS方法,选取双圆柱绕流作为研究对象, 分析双圆柱流动结构,验证方法的准确性与可靠性,考察PANS方法中模型参数选取对于计算结果的影响,评估不同类型PANS方法的性能.研究表明:模化湍动能比例这一模型参数对计算结果有显著影响,且计算域内统一的模型参数取值难以处理复杂流动问题.在此基础上使方法中模化湍动能比例取值随流场物理信息和网格尺度变化,所得结果与SST DES计算结果及实验结果吻合较好,表明该方法适用于复杂湍流数值模拟.
-
关键词:
- 双圆柱 /
- 湍流 /
- PANS /
- 模化湍动能比例 /
- 计算流体动力学(CFD)
Abstract: Partially averaged Navier-Stokes (PANS) method derived from the traditional Reynolds averaged Navier-Stokes (RANS) methods by introducing controlling parameter into original RANS equations to modify these equations, is one kind of hybrid methods which can effectively simulate the separated turbulent flows. Computational results of tandem cylinders using PANS method based on Menter shear stress transport (SST) turbulence model were presented in this investigation. The flow structures around tandem cylinders were analyzed and the accuracy and reliability of PANS method were also verified. Moreover, the influence of the model parameter on numerical results was investigated and the performance of different types of PANS methods was assessed. Studies show that the unresolved-to-total ratio of turbulence kinetic energy has significant effects on the numerical results, and taking this parameter as a constant value throughout the whole computational domain can hardly tackle the complex flow problem. Furthermore, the parameter is made to change along with flow physical information and the local grid scale. The variable fk PANS method agrees well with the results from SST detached-eddy simulation (DES) and the experimental measurements, suggesting strong adaptability to complex turbulence simulation. -
[1] 阎超,于剑,徐晶磊,等. CFD模拟方法的发展成就与展望[J].力学进展,2011,41(5):562-589. Yan C,Yu J,Xu J L,et al.On the achievements and prospects for the methods of computational fluid dynamics[J].Advances in Mechanics,2011,41(5):562-589(in Chinese). [2] Spalart P R, Jou W H,Strelets M,et al.Comments on the feasibility of LES for wings and on a hybrid RANS/LES approach[C]//Proceedings of 1st AFOSR International Conference on DNS/LES,Advances in DNS/LES.Columbus:Greyden Press,1997:137-147. [3] Menter F R, Kuntz M,Bender R.A scale-adaptive simulation model forturbulent flow predictions,AIAA-2003-0767[R].Reston:AIAA,2003. [4] Girimaji S S, Srinivasan R,Jeong E.PANS turbulence model for seamless transition between RANS and LES:Fixed point analysis and preliminary results[C]//Proceedings of ASME/JSME 20034th Joint Fluids Summer Engineering Conference.New York:ASME,2003,2:1901-1909. [5] Batten P, Goldberg U,Chakravarthy S.Reconstructed sub-grid methods for acoustics predictions at all Reynolds numbers,AIAA-2002-2511[R].Reston:AIAA,2002. [6] Frendi A, Tosh A,Girimaji S S.Flow past a backward-facing step:Comparison of PANS,DES and URANS results with experiments[J].International Journal for Computational Methods in Engineeing Science and Mechanics,2007,8(1):23-38. [7] Lakshmipathy S, Reyes D A,Girimaji S S.Partially averaged Navier-Stokes method:Modeling and simulation of low Reynolds number effects in flow past a circular cylinder,AIAA-2011-3107[R].Reston:AIAA,2011. [8] Basu D, Hamed A,Das K.Assessment of partially averaged Navier-Stokes(PANS) multiscale model in transonic turbulent separated flows[C]//Proceedings of FEDSM,5th Joint ASME/JSME Fluids Engineering Conference.New York:ASME,2007,2:1451-1459. [9] Lockard D P. Summary of the tandem cylinder solutions from the benchmark problems for airframe noise computations-I workshop,AIAA-2011-0353[R].Reston:AIAA,2011. [10] Schwamborn D. Results and lessons learned from the EU-project ATAAC[C]//ERCOFTAC Symposium Unsteady Separation in Fluid-Structure Interaction.Mykonos,Greece:[s.n.]2013,6:17-21. [11] Jenkins L N, Khorrami M R,Choudhari M M,et al.Characterization of unsteady flow structures around tandem cylinders for component interaction studies in airframe noise,AIAA-2005-2812[R].Reston:AIAA,2005. [12] Hutcheson F V, Brooks T F.Noise radiation from single and multiple rod configurations,AIAA-2006-2629[R].Reston:AIAA,2006. [13] Jenkins L N, Neuhart D H,Mcginley C B,et al.Measurements of unsteady wake interference between tandem cylinders,AIAA-2006-3202[R].Reston:AIAA,2006. [14] Lockard D P, Khorrami M R,Choudhari M M,et al.Tandem cylinder noise predictions,AIAA-2007-3450[R].Reston:AIAA,2007. [15] Weinmann M, Sandberg R D,Doolan C.Flow and noise prediction for a tandem cylinder configuration using novel hybrid RANS/LES approaches,AIAA-2010-3787[R].Reston:AIAA, 2010. [16] Xiao Z X, Liu J,Huang J B,et al.Numerical dissipation effects on massive separation around tandem cylinders[J].AIAA Journal,2012,50(5):1119-1136. [17] Menter F R. Two equation eddy-viscosity turbulence models for engineering applications[J].AIAA Journal,1994,32(8):1598-1605. [18] Luo D H, Yan C,Liu H K,et al.Comparative assessment of PANS and DES for simulation of flow past a circular cylinder[J].Journal of Wind Engineering & Industrial Aerodynamics,2014,134:65-77. [19] 刘佳,阎超, 赵瑞,等.DES方法对返回舱气动热环境数值模拟[J].北京航空航天大学学报,2013,39(5):590-594. Liu J,Yan C,Zhao R,et al.Simulation of re-entry capsule thermodynamics environment by DES method[J].Journal of Beijing University of Aeronautics and Astronautics,2013,39(5):590-594(in Chinese). [20] 李君哲,阎超, 柯伦,等.气动热CFD计算的格式效应研究[J].北京航空航天大学学报,2003,29(11):1022-1025. Li J Z,Yan C,Ke L,et al.Research on scheme effect of computational fluid dynamics in aerothermal[J].Journal of Beijing University of Aeronautics and Astronautics,2003,29(11):1022-1025(in Chinese).
点击查看大图
计量
- 文章访问数: 1002
- HTML全文浏览量: 62
- PDF下载量: 727
- 被引次数: 0