基于姿态可操作度的机械臂尺寸优化方法

贾世元; 贾英宏; 徐世杰

doi:10.13700/j.bh.1001-5965.2014.0665

基于姿态可操作度的机械臂尺寸优化方法

doi: 10.13700/j.bh.1001-5965.2014.0665

北京航空航天大学宇航学院, 北京 100191

基金项目: 国家自然科学基金(11272027)

详细信息

作者简介:
贾世元(1988—),男,山东日照人,博士研究生,jiashi.yuan@163.com

通讯作者:
贾英宏(1976—),男,河北阳原人,副教授,jia_yingh@163.com,主要研究方向为航天器动力学与控制.

中图分类号: TP242.2
计量
- 文章访问数: 1220
- HTML全文浏览量: 221
- PDF下载量: 741
- 被引次数: 0
出版历程
- 收稿日期: 2014-10-25
- 网络出版日期: 2015-09-20

Dimensional optimization method for manipulator based on orientation manipulability

School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 为解决机械臂尺寸优化设计问题,首先定义了表征灵活性的数值指标——姿态概率系数,即指定工作点上可行样本姿态与所取样本姿态之间的比值;之后根据姿态概率系数提出了姿态可操作度概念,它表征了机械臂在工作空间上的整体可操作性.在此基础上,提出了机械臂尺寸优化方法.该方法在机械臂原有结构设计的基础上,以机械臂自身无碰撞为约束条件,以姿态可操作度的倒数为适应度函数,利用遗传算法优化机械臂的尺寸参数,使优化后机械臂的可操作性最优.以六自由度(DOF)机械臂为例的优化结果表明:优化后机械臂姿态可操作度提高了40.33%.最后利用灵活性工作空间图进一步验证了算法的有效性,并讨论了姿态概率系数对优化结果的影响.
- 机械臂 /
- 尺寸优化 /
- 灵活性 /
- 姿态可操作度 /
- 遗传算法
Abstract: To solve the dimensional optimization design problem of manipulator, the numerical index of dexterity was presented by pose probability coefficient, which was defined as the ratio between possibly sampled orientations and sampled orientations of the working point. According to the pose probability coefficient, the concept of orientation manipulability was proposed, which represented the operability of manipulator. On the basis of orientation manipulability, an algorithm of dimensional optimization to manipulator was proposed. Based on the original structure design, this algorithm takes the reciprocal of the orientation manipulability as fitness function. Under the condition of self-collision, dimensional parameters of manipulator were optimized to maximize the operability by using genetic algorithm. Optimization algorithm was applied to a six-degree of freedom (DOF) manipulator. Results show that the orientation manipulability increases by 40.33% after optimization. Finally, validity of the algorithm was further verified by dexterous workspace and the effect of the pose probability coefficient to the optimal results was also discussed.
- manipulator /
- dimensional optimization /
- dexterity /
- orientation manipulability /
- genetic algorithm

HTML全文

参考文献(19)

[1]	Gupta K C,Roth B.Design considerations for manipulator workspace[J].ASME Journal of Mechanisms,Transmission,and Automation in Design,1982,104(4):704-711.
[2]	Cwiakala M,Lee T W.Generation and evaluation of a manipulator workspace based on optimum path search[J].ASME Journal of Mechanisms,Transmission,and Automation in Design,1985,107(2):245-255.
[3]	Bergamaschi P R,Nogueira A C,Saramago S F P.Design and optimization of 3R manipulators using the workspace features[J].Applied Mathematics and Computation,2006,172(1):439-463.
[4]	Snyman J A,du Plessis L J,Duffy J.An optimization approach to the determination of the boundaries of manipulator workspaces[J].ASME Journal of Mechanical Design,2000,122(4):447-456.
[5]	Klein C A,Blaho B E.Dexterity measures for the design and control of kinematically redundant manipulators[J].The International Journal of Robotics Research,1987,6(2):72-82.
[6]	Yoshikawa T.Manipulability of robotic mechanisms[J].The International Journal of Robotics Research,1985,4(2):3-9.
[7]	马香峰.机器人机构学[M].北京:机械工业出版社,1991:118-126.Ma X F.Robot mechanisms[M].Beijing:China Machine Press,1991:118-126(in Chinese).
[8]	朱建敏,许有恒.机器人工作灵活性的分析方法[J].上海交通大学学报,1989,23(2):53-60.Zhu J M,Xu Y H.A method for analyzing the dexterity of a manipulator[J].Journal of Shanghai Jiao Tong University,1989,23(2):53-60(in Chinese).
[9]	刘淑春,许纪倩.工业机器人工作空间及灵活性[J].北京科技大学学报,1989,11(2):142-147.Liu S C,Xu J Q.On the workspace and the dexterity of general industrial robot[J].Journal of University of Science and Technology Beijing,1989,11(2):142-147(in Chinese).
[10]	Gosselin C,Angeles J.The optimum kinematic design of a planar three-degree-of-freedom parallel manipulator[J].ASME Journal of Mechanisms,Transmission and Automation in Design,1988,110(1):35-41.
[11]	Gosselin C,Angeles J.A global performance index for the kinematic optimization of robotic manipulators[J].ASME Journal of Mechanical Design,1991,113(3):220-226.
[12]	赵新华,张威.基于条件数的3-RTT并联机器人参数优化[J].中国机械工程,2004,15(21):1903-1905.Zhao X H,Zhang W.Parameter optimization of the 3-RTT parallel manipulator based on the conditioning index[J].China Mechanical Engineering,2004,15(21):1903-1905(in Chinese).
[13]	Toz M,Kucuk S.Dexterous workspace optimization of an asymmetric six-degree of freedom Stewart-Gough platform type manipulator[J].Robotics and Autonomous Systems,2013,61(12):1516-1528.
[14]	Zhang P,Yao Z Q,Du Z C.Global performance index system for kinematic optimization of robotic mechanism[J].ASME Journal of Mechanical Design,2014,136(3):1-11.
[15]	Liu H T,Huang T,Mei J P,et al.Kinematic design of a 5-DOF hybrid robot with large workspace/Limb-Stroke ratio[J].ASME Journal of Mechanical Design,2007,129(5):530-537.
[16]	Merlet J P.Jacobian,manipulability,condition number,and accuracy of parallel robots[J].ASME Journal of Mechanical Design,2006,128(1):199-206.
[17]	Lee S.Dual redundant arm configuration optimization with task-oriented dual arm manipulability[J].IEEE Transactions on Robotics and Automation,1989,5(1):78-97.
[18]	于靖军,刘辛军,丁希仑.机器人机构学的数学基础[M].北京:机械工业出版社,2009:278-288.Yu J J,Liu X J,Ding X L.Mathematical foundation of robot mechanism[M].Beijing:China Machine Press,2009:278-288(in Chinese).
[19]	霍伟.机器人动力学与控制[M].北京:高等教育出版社,2005:23-28.Huo W.Robot dynamic and control[M].Beijing:Higher Education Press,2005:23-28(in Chinese).