航空发动机螺栓连接薄层单元建模方法

姚星宇; 王建军; 翟学

doi:10.13700/j.bh.1001-5965.2014.0796

航空发动机螺栓连接薄层单元建模方法

doi: 10.13700/j.bh.1001-5965.2014.0796

北京航空航天大学能源与动力工程学院, 北京 100191

详细信息

作者简介:
姚星宇(1986-),男,四川德阳人,博士研究生,yaoxingyu@buaa.edu.cn

通讯作者:
王建军(1956-),男,江苏苏州人,教授,wangjianjun@buaa.edu.cn,研究方向为航空发动机强度与振动.

中图分类号: V232.7
计量
- 文章访问数: 1123
- HTML全文浏览量: 69
- PDF下载量: 490
- 被引次数: 0
出版历程
- 收稿日期: 2014-12-17
- 修回日期: 2015-03-13
- 网络出版日期: 2015-12-20

Modeling method of bolted joints of aero-engine based on thin-layer element

School of Energy and Power Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 螺栓连接广泛应用于航空发动机结构中,对航空发动机动力特性有重要影响.薄层单元法能够很好地模拟复杂连接结构并保持结构完整性.以薄层单元法为基础,给出航空发动机螺栓连接结构薄层单元法参数化建模原理,研究薄层单元材料参数对螺栓连接刚度的影响规律,并从理论推导出发确定薄层单元相关材料参数,最后将该方法应用到实际结构中,并与精细有限元模型结果对比,从而验证薄层单元法的正确性和应用前景.研究结果表明:薄层单元法能够很好地模拟航空发动机螺栓连接结构;对轴向、弯曲刚度起决定作用的是薄层单元轴向弹性模量,对剪切刚度起决定作用的是薄层单元xy、xz平面的剪切模量;薄层单元材料参数能够用螺栓连接结构参数示出.
- 螺栓连接 /
- 薄层单元法 /
- 航空发动机 /
- 连接刚度 /
- 有限元
Abstract: The bolted joints, which are commonly used in aero-engine structure, have important influences on dynamic characteristics of aero-engine. The thin-layer element method can simulate complex connection structure and maintain the structure integrity. Based on the thin-layer element method, the modeling principles of aero-engine bolted joints was studied and the influence law of material parameters of thin-layer element on bolted joints stiffness was researched. Then the material parameters of thin-layer element through theoretical derivation were determined. Finally it was applied to actual structure and compared with detailed finite elements model so as to verify the correctness and aspect of this method. The results indicate that the thin-layer element method can simulate aero-engine bolted joints excellently; the axial and bending stiffness are decided by axial elastic modulus of thin-layer element, and the shear stiffness is decided by the xy and xz plane shear modulus of thin-layer element; the material parameters of thin-layer element can be expressed by structural parameters of bolted joints.
- bolted joints /
- thin-layer element method /
- aero-engine /
- joint stiffness /
- finite element

HTML全文

参考文献(23)

[1]	Bickford J H.An introduction to the design and behavior of bolted joints[M].2nd ed.New York:Marcel Dekker,Inc.,1990:1-8.
[2]	Liu S G,Wang J,Hong J,et al.Dynamics design of the aero-engine rotor joint structures based on experimental and numerical study[C]//Proceedings of ASME Turbo Expo.New York:ASME,2010:GT2010-22199.
[3]	樊宁.航空发动机连接结构刚度非线性及其对转子动力学影响[D].北京:北京航空航天大学,2013. Fan N.Studies on dynamic characteristics of the joint in the aero-engine rotor system[D].Beijing:Beijing University of Aeronautics and Astronautics,2013(in Chinese).
[4]	Belvin W K.Modeling of joints for the dynamic analysis of truss structures,NASA-L-16163[R].Washington,D.C.:NASA,1987.
[5]	Gregory D L,Martinez D R.On the development of methodologies for constructing predictive models of structures with joints and interfaces,SAND2001-0003P[R].Albuquerque:Sandia National Laboratories,2001.
[6]	Ibrahim R A,Pettit C L.Uncertainties and dynamic problems of bolted joints and other fasteners[J].Journal of Sound and Vibration,2005,279(3-5):857-936.
[7]	Groper M.Microslip macroslip in bolted joints[J].Experimental Mechanics,1985,25(2):171-174.
[8]	Gaul L,Nitsche R.The role of friction in mechanical joints[J].Applied Mechanics Reviews,2001,54(2):93-106.
[9]	Kim J,Yoon J C,Kang B S.Finite element analysis and modeling of structure with bolted joints[J].Applied Mathematical Modelling,2007,31(5):895-911.
[10]	Ahmadian H,Jalali H.Identification of bolted lap joints parameters in assembled structures[J].Mechanical Systems and Signal Processing,2007,21(2):1041-1050.
[11]	Boeswald M,Link M,Meyer S.Experimental and analytical investigations of non-linear cylindrical casing joints using base excitation testing[C]//2003 IMAC-XXI:Conference & Exposition on Structural Dynamics.Kissimmee:Society for Experimental Mechanics,2003:1-9.
[12]	Ahmadian H,Mottershead J E,James S,et al.Modelling and updating of large surface-to-surface joints in the AWE-MACE structure[J].Mechanical Systems and Signal Processing,2006,20(4):868-880.
[13]	Desai C S,Zaman M M,Lightner J G,et al.Thin-layer element for interfaces and joints[J].International Journal for Numerical and Analytical Methods in Geomechanics,1984,8(1):19-43.
[14]	Sharma K G,Desai C S.Analysis and implementation of thin-layer element for interfaces and joints[J].Journal of Engineering Mechanics,1992,118(12):2442-2462.
[15]	马双超,臧朝平,兰海波.某航空发动机机匣的动力学模型修正[J].航空动力学报,2013,28(4):878-884. Ma S C,Zang C P,Lan H B.Dynamic model updating of an aero-engine casing[J].Journal of Aerospace Power,2013,28(4):878-884(in Chinese).
[16]	Ahmadian H,Ebrahimi M,Mottershead J E,et al.Identification of bolted-joint interface models[C]// Proceedings of the 2002 International Conference on Noise and Vibration Engineering.Leuven:Katholieke Universiteit Leuven,2002:1741-1747.
[17]	Iranzad M,Ahmadian H.Identification of nonlinear bolted lap joint models[J].Computers and Structures,2012,96-97:1-8.
[18]	Pande G N,Sharma K G.On joint interface elements and associated problems of numerical ill-conditioning[J].International Journal for Numerical and Analytical Methods in Geomechanics,1979,3(3):293-300.
[19]	黄耀英,吴中如,王德信.薄层单元基本假设和简化探讨[J].力学与实践,2008,30(2):49-52. Huang Y Y,Wu Z R,Wang D X.Discuss on fundamental assumption and simplification of thin-layer element[J].Mechanics in Engineering,2008,30(2):49-52(in Chinese).
[20]	栾宇.航天器结构中螺栓法兰连接的动力学建模方法研究[D].大连:大连理工大学,2012. Luan Y.Study on dynamic modeling of bolted flange connections in aerospace structures[D].Dalian:Dalian University of Technology,2012(in Chinese).
[21]	Williams J G,Anley R E,Nash D H,et al.Analysis of externally loaded bolted joints:Analytical, computational and experimental study[J].International Journal of Pressure Vessels and Piping,2009,86(7):420-427.
[22]	Pedersen N L,Pedersen P.Stiffness analysis and improvement of bolt-plate contact assemblies[J].Mechanics Based Design of Structures and Machines,2008,36(1):47-66.
[23]	Oskouei R H,Keikhosravy M,Soutis C.Estimating clamping pressure distribution and stiffness in aircraft bolted joints by finite-element analysis[J].Proceedings of the Institution of Mechanical Engineers,Part G:Journal of Aerospace Engineering,2009,223(7): 863-871.