涡轮轴断裂条件下空气系统强瞬变过程分析

刘传凯; 李圆圆; 李艳茹; 姜宏超; 丁水汀

doi:10.13700/j.bh.1001-5965.2015.0064

涡轮轴断裂条件下空气系统强瞬变过程分析

doi: 10.13700/j.bh.1001-5965.2015.0064

刘传凯^1,2,3, ,,
李圆圆¹,
李艳茹¹,
姜宏超⁴,
丁水汀^3,4

1.
北京航空航天大学交通科学与工程学院, 北京 100083
2. 北京航空航天大学航空发动机气动热力国家级重点实验室, 北京 100083
3. 先进航空发动机协同创新中心, 北京 100083
4. 北京航空航天大学能源与动力工程学院, 北京 100083

基金项目: 国防基础科研项目(B2120132006)

详细信息

作者简介:
刘传凯男,博士,讲师,硕士生导师。主要研究方向:航空发动机总体技术,航空发动机热端部件冷却技术。Tel.:010-82316627E-mail:liuchuankai@buaa.edu.cn

通讯作者:
刘传凯,Tel.:010-82316627E-mail:liuchuankai@buaa.edu.cn

中图分类号: V228.3
计量
- 文章访问数: 1013
- HTML全文浏览量: 183
- PDF下载量: 576
- 被引次数: 0
出版历程
- 收稿日期: 2015-01-30
- 网络出版日期: 2016-01-20

Dynamic analysis of air system with fast transients in shaft failure event

1.
School of Transportation Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
2. National Key Laboratory of Science and Technology on Aero-Engine Aero-thermodynamics, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
3. Collaborative Innovation Center of Advanced Aero-Engine, Beijing 100083, China
4. School of Energy and Power Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

Funds: Defense Industrial Technology Development Program (B2120132006)

摘要

摘要: 建立了针对空气系统强瞬变过程的控制方程及模块化仿真模型,该模型包括构成瞬态空气系统网络的4类基本元件:容腔元件、节点元件、管道元件和节流元件。上述基本元件及其组合单元的仿真结果与公开的文献数据能够较好的吻合,证明该模型能够模拟容积效应、惯性力作用占主导的强瞬变空气系统演化。在此基础上,仿真分析了某型航空发动机高压涡轮(HPT)轴断裂失效条件下的空气系统强瞬变过程。结果表明,涡轮轴的断裂失效能够引起空气系统内部复杂响应过程,并能导致涡轮盘所受的轴向力反向。该瞬态空气系统模型成功模拟了气流参数毫秒时间量级的动态响应,为深入研究航空发动机内部复杂空气系统的瞬变机理提供了有效的技术手段。
- 航空发动机 /
- 内流空气系统 /
- 瞬态 /
- 模块化建模 /
- 动态仿真
Abstract: This study established the governing equations and the corresponding modularized simulation model for air system in rapid transients. The modularized model consists of four kinds of basic components that constitute the transient air system network: pressure vessels, nodes, ducts, and throttles. The validation of the modular components and their assemblies against published data has been demonstrated to be successful. The model is proved to be able to handle volume packing effects and flow inertia effects that account for the main contributions to fast transient scenarios. On this basis, the model is utilized to analyze the flow evolution of air system in aero engine high pressure turbine (HPT) shaft failure event. The results show that the shaft failure can lead to complex dynamic response in the air system and the subsequent reversal of the turbine disk endload. The model established in this study successfully predicts the air system transient response within millisecond time scales, which provides an effective approach to gain insight into the complex transient mechanism of aero engine air system.
- aero engine /
- internal air system /
- transient /
- modular modeling /
- dynamic simulation

HTML全文

参考文献(22)

[1]	CHEW J W,HILLS N J.Computational fluid dynamics for turbomachinery internal air systems[J].Physical and Engineering Sciences,2007,365(1859):2587-2611.
[2]	VLAD G,UMESH J,NICK H,et al.Coupled fluid-structure transient thermal analysis of a gas turbine internal air system with multiple cavities[J].Journal of Engineering for Gas Turbines and Power,2012,134(1):1-8.
[3]	SUN Z L,CHEW J W,HILLS N J,et al.Coupled aero-thermo-mechanical simulation for a turbine disc through a full transient cycle:GT2010-22673[R].New York:ASME,2010.
[4]	马文通,王岳人.基于部件间容积法的自然循环蒸发器动态仿真[J].锅炉技术,2008,39(1):7-9. MA W T,WANG Y R.Dynamic simulation of evaporator of natural circulation evaporator or based on inter-component volume methodology[J].Boiler Technology,2008,39(1):7-9 (in Chinese).
[5]	蔡瑞忠,张力,谢茂清,等.热工流体网路的实时仿真模型及其算法[J].系统仿真学报,1992,4(4):13-18. CAI R Z,ZHANG L,XIE M Q,et al.Real-time simulation model and algorithm for thermahydraulic network[J].Journal of System Simulation,1992,4(4):13-18 (in Chinese).
[6]	候升平,陶智,韩树军,等.非稳态流体网络方法在发动机空气冷却系统中的应用[J].航空动力学报,2009,24(3):494-498. HOU S P,TAO Z,HAN S J,et al.Study on application of unsteady fluid network to the air system in engine[J].Journal of Aerospace Power,2009,24(3):494-498 (in Chinese).
[7]	候升平,陶智,韩树军,等.非稳态流体网络模拟新方法及其应用[J].航空动力学报,2009,24(6):1253-1257. HOU S P,TAO Z,HAN S J,et al.New simulation approach to the unsteady fluid network and the application[J].Journal of Aerospace Power,2009,24(6):1253-1257(in Chinese).
[8]	吴宏,胡肖肖.应用特征线法求解航空发动机瞬态空气系统[J].航空动力学报,2013,28(9):2003-2008. WU H,HU X X.Solving transient second air system in engine by characteristics method[J].Journal of Aerospace Power,2013,28(9):2003-2008(in Chinese).
[9]	李澎,吴宏,陶智,等.二次空气系统一维非定常计算方法[J].航空动力学报,2014,29(7):1710-1720. LI P,WU H,TAO Z,et al.One-dimensional unsteady calculation method of secondary air system[J].Journal of Aerospace Power,2014,29(7):1710-1720(in Chinese).
[10]	SCHALLHORN P A,HASS N E.Forward looking pressure regulator algorithm for improved modeling performance within the generalized fluid system simulation program:AIAA-2004-3667[R].Reston:AIAA,2004.
[11]	REDDY H P.Simulation and state estimation of transient flow in gas pipeline networks using a transfer function model[J].Industrial & Engineering Chemistry Research,2006,45(11):3853-3863.
[12]	吴丁毅.内流系统的网络计算法[J].航空学报,1996,17(6):653-657. WU D Y.Network technique of internal system[J].Acta Aeronautica et Astronautica Sinica,1996,17(6):653-657(in Chinese).
[13]	GALLAR L,CALCAGNI C,LIORENS C,et al.Time accurate modelling of the secondary air system response to rapid transients[J].Journal of Aerospace Engineering,2011,225(8):946-958.
[14]	王华阁.航空发动机设计手册——空气系统及传热分析[M].北京:航空工业出版社,2001:12-77. WANG H G.Aero engine design manual-Air system and heat transfer analysis[M].Beijing:Aviation Industry Press,2001:12-77 (in Chinese).
[15]	曹玉璋,陶智,徐国强,等.航空发动机传热学[M].北京:北京航空航天大学出版社,2005:268-283. CAO Y Z,TAO Z,XU G Q,et al.Aero engine heat transfer[M].Beijing:Beihang University Press,2005:268-283(in Chinese).
[16]	倪纬斗,苟建兵,孙怠,等.热动力系统流体网络及算法处理[J].系统仿真学报,1997,9(3):78-83. NI W D,GOU J B,SUN D,et al.Research on fluid network in thermal power system[J].Journal of System Simulation,1997,9(3):78-83(in Chinese).
[17]	DAVID M,JOHN W C.Response of a disk cavity flow to gas turbine engine transients[C]//Proceedings of ASME Turbo Expo 2010:Power for Land,Sea and Air.Glasgow:American Society of Mechanical Engineers,2010:1113-1122.
[18]	刘传凯,刘海明,李艳茹,等.强瞬变空气系统的模块化仿真建模[J].航空动力学报,2015,30(8):1826-1833. LIU C K,LIU H M,LI Y R,et al.Modularized simulation of air system with fast transient[J].Journal of Aerospace Power,2015,30(8):1826-1833(in Chinese).
[19]	DUTTON J C,COVERDILL R E.Experiments to study the gaseous discharge and filling of vessels[J].International Journal of Engineering Education,1997,13(2):123-134.
[20]	BENSON R S.The thermodynamics and gas dynamics of internal combustion engines[M].Oxford:Clarendon Press,1986:121-130.
[21]	CALCAGNI C,GALLAR L,PACHIDIS V,et al.Development of a one dimensioal dynamic gas turbine secondary air system model-part II:Assembly and validation of a complete network:GT2009-60051[R].Florida:ASME,2009:435-443.
[22]	刘海明.航空发动机空气系统强瞬变过程的仿真研究[D].北京:北京航空航天大学,2014:41-59. LIU H M.Numerical modeling of air system with fast transient in aero-engine[D].Beijing:Beihang University,2014:41-59(in Chinese).