| [1] |
杜善义,关志东.我国大型客机先进复合材料应对策略思考[J].复合材料学报,2008,25(1):1-10. DU S Y,GUAN Z D.Strategic considerations for development of advanced composite technology for large commercial aircraft in China[J].Acta Materiae Compositae Sinica,2008,25(1):1-10(in Chinese).
|
| [2] |
JEROME P.Advanced materials and technology for A380 struc-ture[J].FAST Magazine,2003,32:3-8.
|
| [3] |
NICHOLLS D J,GALLAGHER J P.Determination of GIC in angle-ply composites using a cantilever beam test method[J].Journal of Reinforced Plastics and Composites,1983,2(1):2-17.
|
| [4] |
CHAI H.The characterization of mode I delamination failure in nonwoven,multidirectional laminates[J].Composites,1984,15:277-290.
|
| [5] |
LANZI L.A numerical and experimental investigation on composite stiffened panels into post-buckling[J].Thin-Walled Structures,2004,42(12):1645-1664.
|
| [6] |
OH S H,KIM K S,KIM C G.An efficient postbuckling analysis technique for composite stiffened curved panels[J].Composite Structures,2006,74(3):361-369.
|
| [7] |
FALZON B G,STEVENS K A,DAVIES G O.Postbuckling behaviour of a blade-stiffened composite panel loaded in uniaxial compression[J].Composites Part A:Applied Science and Manufacturing,2000,31(5):459-468.
|
| [8] |
ORIFICI A C,SHAH S A,HERSZBERG I,et al Failure analysis in postbuckled composite t-sections[J].Compsite Structures,2008,86(1-3):146-153.
|
| [9] |
孔斌,叶强,陈普会,等.复合材料整体加筋板轴压后屈曲的传载机制[J].复合材料学报,2010,27(5):142-149. KONG B,YE Q,CHEN P H,et al.Post-buckling load transfer mechanisms of an integrated composite panel under uniaxial compression[J].Acta Materiae Compositae Sinica,2010,27(5):142-149(in Chinese).
|
| [10] |
孔斌,陈普会,陈炎.复合材料整体加筋板轴压后屈曲失效评估方法[J].复合材料学报,2014,31(3):765-771. KONG B,CHEN P H,CHEN Y.Post-buckling failure evaluation method of integrated composite panels under uniaxial compression[J].Acta Materiae Compositae Sinica,2014,31(3):765-771(in Chinese).
|
| [11] |
陈绍杰.复合材料技术与大型飞机[J].航空学报,2008,29(3):605-610. CHEN S J.Composite technology and large aircraft[J].Acta Aeronautica et Astroautica Sinica,2008,29(3):605-610(in Chinese).
|
| [12] |
FALZON B G,STEVEN G P.Buckling mode transition in hat-stiffened composite panels loaded in uniaxial compression[J].Composite Structures,1997,37(2):253-267.
|
| [13] |
FALZON B G.The behaviour of damage tolerant hat-stiffened composite panels loaded in uniaxial compression[J].Composites Part A:Applied Science and Manufacturing,2001,32(9):1255-1262.
|
| [14] |
MO Y M,GE D Y,ZHOU J F.Experiment and analysis of hat-stringer-stiffened composite curved panels under axial compression[J].Composite Structures,2015,123:150-160.
|
| [15] |
KIM G H,CHOI J H,KWEON J H.Manufacture and performance evaluation of the composite hat-stiffened panel[J].Composite Structures,2010,92(9):2276-2284.
|
| [16] |
ZHU S H,YAN J Y,CHEN Z,et al.Effect of the stiffener stiffness on the buckling and post-buckling behavior of stiffened composite panels-experimental investigation[J].Composite Structures,2015,120:334-345.
|
点击查看大图
下载:
