Experiment of cavity and trajectory characteristics of oblique water entry of revolution bodies
-
摘要: 针对回转体低速倾斜入水过程空泡的生成机理和演化特性开展研究。通过不同入水速度和入水角度回转体倾斜入水对比实验,研究了入水速度和入水角度对入水空泡、回转体速度、俯仰角及阻力系数的影响规律。研究结果表明:空泡深闭合时刻的空泡长度、最大空泡直径和空泡闭合点深度随着回转体入水速度的增加而增大;空泡深闭合发生时间随着入水速度的增加而小幅增大;同一入水时刻回转体俯仰角和俯仰角速度均随入水速度的增加而减小;随着回转体入水角度的增加,同一时刻入水空泡直径和回转体速度逐渐减小,阻力系数逐渐增大。Abstract: Studies of the oblique water entry of revolution bodies are conducted. By the experiment of revolution body velocity water entry with different velocities and angles, cavity evolution on revolution bodies is discussed, including formation, development and pinch-off of oblique entry. The influence of water entry velocity and angle on the cavities, revolution body velocity, pitching angle and drag coefficients was experimentally obtained. The experiments show that at the moment when the cavity is pinched off, the length and largest diameters of the cavity, and the depth of the closure point are larger as the velocity of revolution bodies increases. The cavity closure time increases slightly with the increase of revolution body velocity. When the velocity of revolution bodies is larger, the pitching angle and angle velocity are smaller. With the increase of water-entry angle of revolution bodies, the diameter of the cavity and the velocity of revolution bodies gradually become smaller, but the drag coefficients become larger.
-
Key words:
- revolution body /
- kinematical parameters /
- oblique water entry /
- water entry cavity /
- experiment study
-
[1] 王永虎,石秀华.入水冲击问题研究的现状与进展[J].爆炸与冲击,2008,28(3):276-282.WANG Y H,SHI X H.Review on research and development of water-entry impact problem[J].Explosion and Shock Waves,2008,28(3):276-282(in Chinese). [2] WORTHINGTON A M,COLE R S.Impact with a liquid surface studied by the aid of instantaneous photography[J].Philosophical Transactions of the Royal Society,1900,194(A):175-200. [3] WORTHINGTON A M,COLE R S.A study of splashes[M].New York:Longmans Green and Company,1908:25-76. [4] MAY A.Vertical entry of missiles into water[J].Journal of Applied Physics,1953,23(12):1362-1372. [5] TABUTEAU H,SIKORSKI D,SIMON J,et al.Impact of spherical projectiles into a viscoplastic fluid[J].Physical Review E.Statistical,Nonlinear & Soft Matter Physics,2011,84(3):1971-1982. [6] CHARTERS A C.The aerodynamic performance of small spheres from subsonic to high supersonic velocities[J].Journal of the Aeronautical Sciences,1945,12(4):468-476. [7] ABELSON H I.Pressure measurements in the water-entry cavity[J].Journal of Fluid Mechanics,1970,44(part 1):129-144. [8] SHI H H,ITOH M,TAKAMI T.Optical observation of the supercavitation induced by high-speed water entry[J].Journal of Fluids Engineering-Transactions of the ASME,2000,122(4):806-810. [9] 施红辉,周浩磊,吴岩,等.伴随超空泡产生的高速细长体入水实验研究[J].力学学报,2012,44(1):49-55.SHI H H,ZHOU H L,WU Y,et al.Experiment on water entry of high-speed slender body and the resulting supercavitation[J].Chinese Journal of Theoretical and Applied Mechanics,2012,44(1):49-55(in Chinese). [10] SHI H H,MAKOTO K.Underwater acoustics and cavitating flow of water entry[J].Acta Mechanica Sinica,2004,20(4):374-382. [11] 何春涛,王聪,何乾坤,等.圆柱体低速入水空泡试验研究[J].物理学报,2012,61(13):134701-134708.HE C T,WANG C,HE Q K,et al.Low speed water-entry of cylindrical projectile[J].Acta Physica Sinica,2012,61(13):134701-134708(in Chinese). [12] 杨衡,张阿漫,龚小超,等.不同头型弹体低速入水空泡试验研究[J].哈尔滨工程大学学报,2014,35(9):1060-1066.YANG H,ZHANG A M,GONG X C,et al.Experimental study of the cavity of low speed water entry of different head shape projectiles[J].Journal of Harbin Engineering University,2014,35(9):1060-1066(in Chinese). [13] 胡青青.不同倾角下钝体入水后的超空泡流动的实验观察及数值计算[D].杭州:浙江理工大学,2014:8-9.HU Q Q.Experimental observation and numerical calculation of supercavity flow of blunt body under different inclination angle into the water[D].Hangzhou:Zhejiang Sci-Tech University,2014:8-9(in Chinese). [14] 梅哲力.细长圆柱体入水的特性研究[D].南京:南京理工大学,2014:32-49.MEI Z L.Characteristic research on the water entry of slender cylinder[D].Nanjing:Nanjing University of Science and Technology,2014:32-49(in Chinese). [15] 马庆鹏,魏英杰,王聪,等.锥头圆柱体高速入水空泡数值模拟[J].北京航空航天大学学报,2014,40(2):204-209.MA Q P,WEI Y J,WANG C,et al.Numerical simulation of high-speed water-entry cavity of cone cylinder[J].Journal of Beijing University of Aeronautics and Astronautics,2014,40(2):204-209(in Chinese). [16] 陈晨,马庆鹏,魏英杰,等.空气域压力对高速射弹入水流场影响[J].北京航空航天大学学报,2015,41(8):1443-1450.CHEN C,MA Q P,WEI Y J,et al.Effects of operating pressure on high-speed projectile's water-entry flow[J].Journal of Beijing University of Aeronautics and Astronautics,2015,41(8):1443-1450(in Chinese). [17] BLACKWELL B D.Preliminary remarks on the cavity made by a projectile entering water:S.R.E./U.1/4[R].New York:Department of Science Rescue,1944. [18] MAY A.Water entry and the cavity-running behavior of missiles:SEAHAC/TR-75-2[R].New York:US Department of Commerce,1975. [19] EPPS B P.An impulse framework for hydrodynamic force analysis:Fish propulsion,water entry of spheres,and marine propellers[D].Cambridge:Massachusetts Institute of Technology,2010:35-68.
点击查看大图
计量
- 文章访问数: 845
- HTML全文浏览量: 91
- PDF下载量: 542
- 被引次数: 0