Cold-flow tests on 1-cell 2D linear plug nozzle
-
摘要: 为研究塞式喷管的高度特性和底部特性,采用高压空气为工作介质对单元直排塞式喷管进行实验.研究了底部盖板、底部二次流对性能的影响和塞锥壁面压强分布.实验结果表明:无底部盖板可提高塞式喷管低空性能2%~7%;底部二次流可提高底部压强,减少底部开闭状态转变过程带来的推力突降;底部二次流流量以1%~1.5%为宜,过大将引起喷管性能下降.本实验喷管设计点效率均超过99%,部分实验接近100%,高度补偿效果明显.Abstract: To know more altitude compensation and base characteristics of plug nozzle, cold-flow tests on 1-cell 2D linear plug nozzle, which utilize high pressure air as propellant were conducted. The effects on 1-cell 2D linear plug nozzle of base wall and base bleed ratio were studied. The pressure distribution on plug was also studied. The results indicate that the performance of plug nozzle can be increased 2%~7% without base wall at low altitude. The bleed can increase base pressure and decrease the variety of thrust which be caused by changing from open base to close base. It is found that 1% to 1.5% base bleed ratio is the optimum value range and the performance of plug nozzle would be decreased if base bleed ration is more than that range. The maximum nozzle efficiency of all of plug nozzle tested here are more than 99%, some of them are nearly 100%. It has good altitude compensation.
-
Key words:
- rocket engines /
- plug nozzle /
- base pressure /
- altitude characteristics /
- cold-flow test
-
[1] Silver R. Final report, advanced aerodynamic spike configurations:volum1, analytical and cold flow studies . USA:Rockwell International Corporation, Rocketdyne Division, Report AFRPL-TR-67-246-Vol I, 1967 [2] Tomita T, Takahashi M, Onodera T. Visualization of shock wave interaction on the surface of clustered plug nozzles . AIAA Paper 98-3523,1998 [3] Sakamoto H, Takahashi M, Sasaki M, et al. An experimental study on a 14 kN linear aerospike nozzle combustor . AIAA Paper 99-2761,1999 [4] Onofri M. Plug nozzles:summary of flow features and engine performance . AIAA Paper 2002-0584,2002 [5] 戴梧叶. 塞式喷管的实验与数值模拟研究 . 北京:北京航空航天大学 航学院,2002 Dai Wuye. Experimental and numerical studies of aerospike nozzles . Beijing:School of Astronautics, Beijing University of Aeronautics and Astronautics, 2002(in Chinese) [6] 覃粒子, 刘 宇, 王一白. 塞式喷管多参数性能优化计算[J] 宇航学报, 2002, 23(2):28~33 Qin Lizi, Liu Yu, Wang Yibai. Optimized performance calculation in multi-parameter for aerospike nozzle [J] Journal of Astronautics, 2002, 23(2):28~33(in Chinese) [7] 戴梧叶, 刘 宇, 马 彬. 瓦状塞式喷管冷流实验研究[J] 推进技术, 2002, 23(5):420~424 Dai Wuye, Liu Yu, Ma Bin. Cold-flow tests on tile-shaped aerospike nozzle . Journal of Propulsion Technology, 2002, 23(5):420~424(in Chinese)
点击查看大图
计量
- 文章访问数: 3038
- HTML全文浏览量: 246
- PDF下载量: 780
- 被引次数: 0