Simulation design based on state-space for environment test equipment
-
摘要: 对于环境试验设备的设计,传统的工程设计方法是从指标出发,用半经验、稳态的方法设计系统,按照围护结构稳态放热量和试品冷透来计算制冷系统容量,这种稳态的计算结果通常比实际需要大的多.采用基于状态空间描述的分布参数模型用于系统动态仿真,可以允许对许多先不必要考虑的环节简化处理,对主要的负荷如围护结构、被试品等做精确的处理,可以较准确的得到总的制冷量需求,验证控制策略等,对于初期方案设计中系统制冷、加热设备容量的准确计算、不同方案的验证、控制方案的制定具有明显的意义.Abstract: To calculate the system capacity accurately in environment test equipment design, a simulation scheme was introduced. This scheme was based on distributed parameter model and the model was expressed in state-space. In the traditional design, refrigeration of loading was regarded as completeness atthe end of refrigeration course. As a result, the system capacity is calculated much greater than the actual need. Compared with traditional design, the simulation design scheme is more accurate in system capacity calculation. The simulation scheme can be applied to test and compare different control scheme too. It is of distinct meaning and efficiency in the initial design stage.
-
Key words:
- environment test /
- simulation /
- state-space
-
[1] 王 浚,黄本诚,万才大．环境模拟技术[M]．北京:国防工业出版社,1996．225~266 Wang Jun,Huang Bencheng,Wan Caida.Environment simulation[M].Beijing:National Defense Industry Press,1996.225~266(in Chinese) [2] 陈芝久,阕雄才,丁国良．制冷系统热动力学[M]．北京:机械工业出版社,1998．169~170 Chen Zhijiu,Que Xiongcai,Ding Guoliang.Thermodynamics of refrigerition system .Beijing:China Mechine Press,1998.169~170(in Chinese) [3] 尤昌德．线性系统理论基础[M]．北京:电子工业出版社,1984．7~13 You Changde.Elementary theory of linear system[M].Beijing:Publishing House of Electronic Industry,1984.7~13(in Chinese) [4] 杨世铭．传热学[M]．第二版．北京:高等教育出版社,1987．26~29 Yang Shiming.Heat transfer[M]. Beijing:Higher Education Press,1987.26~29(in Chinese) [5] 陶文铨．数值传热学[M]．西安:西安交通大学出版社,1988．18 Tao Wenquan.Numerical heat transfer[M].Xi'an:Xi'an Jaotong University Press,1988.18(in Chinese) [6] 楼顺天,陈生潭,雷虎民．MATLAB 5.X程序设计语言[M]．西安:西安电子科技大学出版社,2000．123~155 Lou Shuntian,Chen Shengtan,Lei Humin. Program design for MATLAB 5.X [M]. Xi'an:Xi'an Electronics Science and Technology University Press,2000.123~155(in Chinese) [7] 施 阳,严卫生,李 俊．MATLAB语言精要及动态仿真工具SIMULINK[M]．西安:西北工业大学出版社,1997．43~65 Shi Yang,Yan Weisheng,Li Jun.Gist of MATLAB and dynamic simulatin tool-SIMULINK[M]. Xi'an:Northwesten Polytechnical University Press,1997.43~65(in Chinese) [8] 施 仁,刘文江．自动化仪表与过程控制[M]．北京:电子工业出版社,1990．184~191 Shi Ren,Liu Wenjiang.Automatic apparatus and process control[M]. Beijing:Publishing House of Electronic Industry,1990.184~191(in Chinese) -
点击查看大图
计量
- 文章访问数: 2452
- HTML全文浏览量: 70
- PDF下载量: 824
- 被引次数: 0
下载:
