Multi-access interference suppression in DS/FH communication system
-
摘要: 根据DS-CDMA(Direct Sequence Code Division Multi-Access)系统中多用户检测的思想,分析了并行干扰抵消PIC(Parallel Interference Cancellation)对系统性能的影响,在此基础上,提出了采用部分并行干扰抵消PPIC(Partial Parallel Interference Cancellation)技术来抑制DS/FH SSMA(Direct Sequence/Frequency Hopping Spread Spectrum Multi-Access)混合系统中的多址干扰MAI ( Multi-Access Interferences).推导了闭环形式的误码率公式,得到系统性能评估的上限表达式.仿真结果表明,采用PPIC技术可有效的提高DS/FH SSMA系统的抗多址干扰的能力,因而可以提高系统的容量.仿真是建立在AWGN信道下的,对于衰落信道和低信噪比环境下,系统的性能会有一定程度的降低.Abstract: According to the thought of multi-users detection(MUD)used in direct sequence code division multi-access (DS-CDMA) system, partial parallel interference cancellation(PPIC) technology was put forward to suppress multi-access interference(MAI) in direct sequence/frequency hopping spread spectrum multi-access(DS/FH SSMA)after analyzing the effect on system performance by parallel interference cancellation(PIC). Bit error rate(BER) closed expression was deduced and up-limited expression of system performance estimation was also acquired. Simulation results demonstrate that PPIC technology can suppress MAI effectively in DS/FH SSMA, and system capacity can be improved. The simulation was accomplished under AWGN, system performance will deteriorates to some extent under fading channel and low signal noise ratio(SNR)condition.
-
[1] Patel P, Holtzman J. Analysis of a simple successive interference cancellation scheme in a DS-CDMA system [J]. IEEE Journal on Selected Areasin Communications, 1994, 12(5):796~807 [2]Kim J H,Kim S W. Partial successive interference cancellation in hybrid DS/FH spread spectrum multiple-access systems[J]. IEEE Trans on Communications, 2001,49(10):1710~1714 [3]Michael B R,Michael B,Steven P N. Comment on partial parallel interference cancellation for CDMA[J]. IEEE Transactions on Communications,1999, 47(5):658~661 [4]Gao Xue,Li Chengshu. Performance of partial parallel interference cancellation in DS-CDMA system with delay estimation error . PIMRC2000 .London, 2000.724~727 期刊类型引用(7)
1. 高赫,袁伟,郭前建,岳琪,吕学祜. 基于气固两相流原理的磨料池光整加工研究. 机床与液压. 2024(17): 111-117 . 百度学术
2. 王志杰,姚军,熊家志,赵彦琳,常笑,董士刚. Q345钢两相流冲蚀实验研究. 北京航空航天大学学报. 2023(04): 891-899 . 本站查看
3. 袁建明,蔡钰杨,胡志辉,叶方平. 基于离散元法的斗轮堆取料机料斗磨损仿真研究. 机械设计. 2022(06): 1-6 . 百度学术
4. 王雪,夏晞冉,秦永光,樊朝斌,刘铭刚,高凯歌. 油气田设备多相流冲蚀磨损主控因素研究进展. 安全、健康和环境. 2021(05): 1-6 . 百度学术
5. 高津,张永,王健,苏力德,吴国境,琦格琦. 挟沙风冲蚀风力机叶片涂层磨损研究. 太阳能学报. 2020(07): 367-371 . 百度学术
6. 赵彦琳,杨少帅,姚军. 304不锈钢两相流冲蚀腐蚀的实验研究. 北京航空航天大学学报. 2019(08): 1504-1511 . 本站查看
7. 许磊,罗坤,赵永志,樊建人,岑可法. 物料粒径对半自磨机衬板磨损的影响. 浙江大学学报(工学版). 2019(12): 2255-2263 . 百度学术
其他类型引用(3)
-

计量
- 文章访问数: 2984
- HTML全文浏览量: 85
- PDF下载量: 842
- 被引次数: 10