一种面向产品规划过程的组合质量屋

王美清; 唐晓青

一种面向产品规划过程的组合质量屋

北京航空航天大学机械工程及自动化学院, 北京 100083

基金项目: 国家863基金资助项目(2001AA414410); 高等学校博士点基金资助项目(20020006014)

详细信息

作者简介:
王美清(1966-),女,山西大同人,副教授, wmq6672@263.net.

中图分类号: TP 13
计量
- 文章访问数: 3173
- HTML全文浏览量: 44
- PDF下载量: 960
- 被引次数: 0
出版历程
- 收稿日期: 2003-08-27
- 网络出版日期: 2004-07-31

Combined house of quality oriented product planning

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 针对现代产品设计规划过程中对规划信息的集成性、准确性和完备性的要求,提出了一种面向产品规划过程的组合质量屋,并给出了构建组合质量屋的过程和方法.该组合质量屋包括用户需求质量屋、产品技术特性质量屋和综合质量屋.在构建组合质量屋的过程中,采用网络分析法确定产品技术特性的相对重要度,该方法能综合考虑用户需求间、产品技术特性间以及用户需求层和产品技术特性层之间的相互协作和相互冲突的关系,使得规划结果更加准确可靠.此外,还综合考虑了产品全生命周期各阶段定性和定量约束对规划结果的影响.最后,通过实例研究了运用组合质量屋进行产品规划的步骤和方法,并验证了其有效性.
- 产品规划 /
- 优化 /
- 质量功能配置 /
- 质量屋 /
- 网络分析法
Abstract: Product planning requires accurate and integrated planning information. A combined house of quality (CHOQ) oriented product planning was presented. The CHOQ consists of quality house of customer requirements (CRs), quality house of product technical characteristics (PTCs) and complex house of quality. The methodology of setting up the CHOQ was put forward. The analytic network process (ANP) method was employed to weight based on the important levels of CRs and PTCs, which considered the interrelationships among the CRs and PTCs. It makes the result of product planning more accurate. The proposed analytic procedure took into account qualitative constraints (feasibility, resource utilization ratio, etc) and quantitative constraints (cost, time to market, etc) in product life cycle. A case was studied by using CHOQ to fulfill product planning.
- product planning /
- optimization /
- quality function deployment /
- house of quality /
- analytic network process

HTML全文

参考文献(1)

[1] 巩敦卫,许世范,尹树林,等. 基于质量职能配置的产品规划模型[J].中国矿业大学学报,2000,29 (2):151~154 Gong Dunwei, Xu Shifan,Yin Shulin,et al. Product-programming model based on quality function deployment [J]. Journal of China University of Mining & Technology, 2000, 29(2):151~154 (in Chinese)  [2] 车阿大,林志航. 质量功能配置的多目标规划模型[J]. 计算机集成制造系统——CIMS,1998,4(6):26~30 Che Ada, Lin Zhihang. A multi-goal programming model for quality function deployment [J]. Computer Integrated Manufacturing System, 1998, 4(6):26~30 (in Chinese)  [3] 陈以增,唐加福,候荣涛,等. 基于质量屋的产品设计过程[J]. 计算机集成制造系统——CIMS,2002,8(10):757~761 Chen Yizeng, Tang Jiafu, Hou Rongtao, et al. Product development process based on house of quality [J]. Computer Integrated Manufacturing System, 2002, 8(10):757~761(in Chinese)  [4] 王美清,唐晓青. 产品设计中用户与产品质量特征映射方法研究[J]. 机械工程学报,2004,40(5):136~140 Wang Meiqing Tang Xiaoqing. Mapping customer requirements to product quality characteristics [J]. Chinese Journal of Mechanical Engineering, 2004,40(5):136~140(in Chinese)  [5] Lee J W, Kim S H. Using analytic network process and goal programming for interdependent information system project selection [J]. Computer & Operation Research, 2000,27:367~382  [6]Ertugrul Karsak E, Sozer S, Emre Alptekin S. Product planning in quality function development using a combined analytic network process and goal programming approach [J]. Computer & Industrial Engineering, 2002,44:171~190 [7] 胡运权,郭耀煌. 运筹学教程[M]. 北京:清华大学出版社,1998 Hu Yunquan, Guo Yaohuang. Handbook of operations research[M]. Beijing:Tsinghua University Press, 1998 (in Chinese)

施引文献

资源附件(0)

访问统计