Diagnosis methods and criterions for mechanical failure modes, causes and mechanisms
-
摘要: 从断口、裂纹、痕迹和参数等4个方面阐述了机械失效模式、原因和机理诊断的主要依据,列出了机械使用失效的主要模式、原因和失效的主要形成条件和主要的诊断思路,并从单项分析和综合分析的角度给出了失效模式、原因和机理诊断所需要的"多维"信息系统,为分析和确认各种失效模式、原因和机理提供了主要的推理规则和基本方法;最后分析比较了各种二级疲劳失效模式和各种与应力腐蚀有关的失效模式之间的主要诊断依据和应注意的几个问题,为疑难二级失效模式的诊断问题提供了分析研究方向.Abstract: Mechanical failure modes, causes and mechanisms were described, based on four kinds of failure information including fracture, cracking, related failure marks and certain parameters. Mechanical failure modes, causes, main causing conditions and identifying principles were summarized and listed, "multi phase" information system was provided with single phase analysis and synthetic analysis, which provide reasoning rules and principal methods for mechanical failure analysis. Main criterions for discriminating fatigue failure mode, stress corrosion cracking(SCC) and relevant failure modes were also concerned, which offer signposts for recognizing 2nd level failure modes.
-
Key words:
- failure analysis /
- failure criterin /
- mechanical failure mode
-
[1] 钟群鹏,王仁智,陈玉民,等.我国机电装备失效分析预测预防实践和学术方面的重大进展——失效学体系的形成和发展 .第三次全国机电装备失效分析预测预防战略研讨会论文集 .北京,1998.5~25 Zhong Qunpeng, Wang Renzhi,Chen Yumin, et al. The principal improvements of academic and practical aspects in chinese mechanical & electrical equipment failure analysis, prevention and forecast——failure investigation architecture formation and development . Proc 3rd Chinese Conf Mechanical & Electrical Failure Analysis, Prevention and Forecasting Strategy . Beijing, 1998.5~25 (in Chinese) [2] 钟群鹏,傅国如,张 峥,等.机械装备失效研究的内涵和科学问题的探索[J].机械工程学报,2003,39(10):13~20 Zhong Qunpeng, Fu Guoru,Zhang Zheng, et al. Connotation and scientific investigation in mechanical equipment failure analysis[J]. Chinese Journal of Mechanical Engineering, 2003, 39(10):13~20(in Chinese) [3] 刘民治,钟明勋. 失效分析的思路与诊断[M].北京:机械工业出版社,1999 Liu Minzhi, Zhong Mingxun. Ideological road and diagnosis of failure analysis .Beijing:China Machine Press, 1999(in Chinese) [4] 钟群鹏,田永江.失效分析基础[M]. 北京:机械工业出版社,1989 Zhong Qunpeng,Tian Yongjiang. Basis of mechanical failure analysis[M]. Beijing:China Machine Press, 1989(in Chinese) -
点击查看大图
计量
- 文章访问数: 3434
- HTML全文浏览量: 165
- PDF下载量: 10
- 被引次数: 0
下载:
