含SiO<sub>2</sub>,ZrO<sub>2</sub>微粒复合镀镍层抗高温氧化性能

杜岩滨; 朱立群; 刘慧丛; 白真权

含SiO₂,ZrO₂微粒复合镀镍层抗高温氧化性能

1.
北京航空航天大学材料科学与工程学院北京 100083
2. 西安交通大学材料学院西安 710049

基金项目: 中国石油天然气集团公司石油经营力学行为和环境行为重点实验室基金资助项目(ZYT-0403)

详细信息

作者简介:
杜岩滨(1977-),男,山东莱州人,博士生, yuanbindu@163.com.

中图分类号: TG 17444
计量
- 文章访问数: 2955
- HTML全文浏览量: 142
- PDF下载量: 3
- 被引次数: 0
出版历程
- 收稿日期: 2004-04-28
- 网络出版日期: 2004-10-31

High temperature oxidation resistance of nickel multiple plating containing SiO₂,ZrO₂ particles

1.
School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100083, China
2. Institute of Material Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China

摘要

摘要: 通过对含有SiO₂,ZrO₂微粒复合电沉积的研究,在Cu合金表面分别获得了含量(原子数分数)为11.3％ SiO₂,5.31％ ZrO₂微粒的Ni基复合镀层.通过在800℃、900℃条件下的高温氧化和热震循环试验,研究了这种复合镀镍层的高温氧化性能和界面结合特性.结果表明:经过40 h的高温氧化,2种复合镀镍层的抗氧化性能均达到抗氧化级,而且含SiO₂微粒的复合镀镍层的抗氧化性能优于含ZrO₂微粒的复合镀镍层;经过55次冷热循环,含SiO₂微粒的复合镀镍层与铜基体结合良好.
- 复合材料 /
- 高温抗氧化涂层 /
- SiO₂,ZrO₂微粒
Abstract: Nickel multiple plating containing 11.3％(atoms％)SiO₂ or 5.31％(atoms％)ZrO₂ particles on copper alloy base was obtained by composite electrodeposition method. Through high-temperature oxidation and thermal cycling test at 800℃ and 900℃, the high-temperature oxidation performance of samples prepared previouly and adhension between composite coating and copper base were studied too. The results show that after being tested for 40 hour at high temperature, the anti-oxidation ability of two composite nickel-plated films both reaches the anti-oxidation level according to HB 5258-83, and the composite coating containing SiO₂ particles has better oxidation resistance than that containing ZrO₂ particles. The adhension between the composite coating containing SiO₂ particles and the copper base is well after thermal cycling test for 55 times.
- composite materials /
- high-temperature oxidation resistance coatings /
- SiO₂,ZrO₂ particles

HTML全文

参考文献(1)

[1] Garcia I, Fransaer J, Celis J P. Electrodeposition and sliding wear resistance of nickel composite coatings containing micron and submicron SiC particles[J]. Surface and Coatings Technology,2001,148:171~178 [2]Benea L, Bonora P L, Borello A, et al. Effect of SiC size dimensions on the corrosion wear resistance of the electrodeposited composite coating[J]. Materials and Corrosion,2002,53:23~29 [3]Nowak P, Socha R P, Kaisheva M, et al. Electrochemical investigation of the codeposition of SiC and SiO₂ particles with nickel[J]. Journal of Applied Electrochemistry,2000,30(4):429~437 [4]Fransaer J, Celis J P. New insights into the mechanism of composite plating[J]. Galvanotechnik,2001,92(6):1544~1550 [5] 朱立群,李卫平,钟群鹏. ZrO₂纳米微粉在Ni-W-B非晶态复合镀层中的作用研究[J]. 机械工程材料,1998,22(4):9~11 Zhu Liqun, Li Weiping, Zhong Qunpeng. Effect of ZrO₂ particles in the electrodeposited Ni-W-B amorphous composite coatings[J]. Materials for Mechanical Engineering, 1998,22(4):9~11(in Chinese) [6] 李爱昌.(Ni-W)-ZrO₂非晶复合镀层的制备及其性能[J]. 材料保护,2000,33(7):11~12,54 Li Aichang. Preparation of amorphous (Ni-W)-ZrO₂ composite coating by electrodeposition[J].Materials Protection, 2000,33(7):11~12,54(in Chinese) [7] 禹萍,苏玉长,谭澄宇,等. Ni-SiC和Ni-SiO₂复合镀层性能的研究 . 表面技术,2001,30(3):27~29,44 Yu Ping, Su Yuchang, Tan Chengyu, et al. Study on properties of Ni-SiC and Ni-SiO₂ composite plated coatings[J]. Surface Technology, 2001,30(3):27~29,44(in Chinese) [8] 徐龙堂,徐滨士,周美玲,等.电刷镀镍/镍包纳米Al₂O₃颗粒复合镀层微动磨损性能研究[J]. 摩擦学学报,2001, 21(1):24~27 Xu Longtang, Xu Binshi, Zhou Meiling, et al. Anti-fretting properties of Ni/Ni-coated nano-Al₂O₃ composite coating prepared by electro-brush plating[J]. Tribology, 2001, 21(1):24~27(in Chinese) [9] 吴元康.金刚石纳米晶在材料保护中的应用[J].材料保护,1995,28(4):15~17 Wu Yuankang. Application of diamond nanocrystal in material protection[J].Materials Protection, 1995,28(4):15~17(in Chinese) [10] 黄新民,吴玉程,郑玉春,等.纳米颗粒对复合镀层性能的影响[J].兵器材料科学与工程,1999,22(6):11~13 Huang Xinmin, Wu Yucheng, Zheng Yuchun,et al. Effect of nanometer particles on properties of electroless composite coatings[J]. Ordnance Material Science and Engineering, 1999, 22(6):11~13(in Chinese) [11] 谭澄宇,梁英,夏长清,等.Ni-SiO₂复合电镀层高温氧化性能研究 .表面技术,2000,29(6):16~19 Tan Chengyu, Liang Ying, Xia Changqing, et al. Research on the high temperature oxidation resistance of Ni/SiO₂ composite deposit[J]. Surface Technology, 2000,29(6):16~19(in Chinese) [12] 朱立群,吴俊,刘峰,等.Cu-Zr合金基体上的复合镀层的性能研究 .材料工程,2001,(7):33~35 Zhu Liqun,Wu Jun,Liu Feng, et al. Study of the capability of the electrocomposite coating on the Cu-Zr alloy[J]. Journal of Materials Engineering, 2001,(7):33~35(in Chinese) [13] 黄安,高军,金勇杰,等.表面活性剂在复合电镀中作用研究[J].电镀与环保,1996,16(3):6~8 Huang An, Gao Jun, Jin Yongjie, et al. Effects of surfactants in composite plating[J]. Electroplating & Pollution Control, 1996,16(3):6~8(in Chinese) [14] 郭鹤桐,张三元.复合镀层[M].天津:天津大学出版社,1991 Guo Hetong, Zhang Sanyuan. Composite coating[M]. Tian Jin:Tian Jin University Press,1991(in Chinese)

施引文献

资源附件(0)

访问统计