SMA PseudoRubber Metal and Its Application in Vibration Control
-
摘要: 利用形状记忆合金(SMA,Shape Memory Alloys)的超弹性特性,借鉴拟橡胶金属阻尼材料的制作工艺,研制了超弹性SMA拟橡胶金属阻尼元件;在此基础上,设计了SMA减振器.试验表明:引入SMA后,拟橡胶金属减振器的可恢复变形,阻尼特性都有很大的提高;而拟橡胶金属的构造方式,又使得减振器具有很大的承载能力.上述特性使得该减振器对于宽频带随机载荷有很好的减振效果.Abstract: By virtue of the superelasticity of Shape Memory Alloys(SMA) characterized by its hysteresis stress-strain curve, SMA pseudo-rubber metal damping units were developed and evaluated. On the above basis, a new type of SMA damper was designed and tested. It was shown that SMA damper possesses greater recoverable deformation, larger bearing capacity, and higher damping capacity, which make the SMA damper quite potential in passive vibration control, especially in random case.
-
Key words:
- Shape Memory Alloys(SMA) /
- vibration attenuation /
- damping /
- pseudo-rubber metal /
- superelasticity
-
[1] 闫晓军.随机载荷下SMA减振器及磁吸振器理论与试验研究. 北京航空航天大学动力系,2000 Yan Xiaojun. Theoretical and experimental study on SMA damper and magnetic vibration absorber under random excitation. Dept. of Propulsion, Beijing University of Aeronautics and Astronautics,2000(in Chinese) [2] Grasser E J, Cozzarelli F A. Shape memory alloys as new materials for aseismic isolation[J]. Journal of Engineering Mechanics, ASCE,1991,117(11):2590~2608 [3] Whittaker A S,Krumme R, Sweeney S C, et al. Structural control of buildings response using shape memory alloys. USACERL Technical Report,1995 [4] Witting P R, Cozzarelli F A. Shape memory structural dampers:Material properties, design and seismic testing. National Center for Earthquake Engineering Research, 1993 [5] 邓剑波.新型结构阻尼材料金属橡胶性能的理论与应用试验研究. 北京航空航天大学动力系,1997 Deng Jianbo. Theoretical and experimental investigation on characteristics of a new structural damping material-metal rubber. Dept. of Propulsion, Beijing University of Aeronautics and Astronautics,1997(in Chinese) -
点击查看大图
计量
- 文章访问数: 2792
- HTML全文浏览量: 133
- PDF下载量: 1028
- 被引次数: 0
下载:
