特殊复合球铰3-RPS并联机构及其连续刚度模型

崔学良; 韩先国; 陈五一

特殊复合球铰3-RPS并联机构及其连续刚度模型

北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目: 航空科学基金资助项目(20081651025); 北京市重点实验室资助项目

详细信息

作者简介:
崔学良(1971-),男,山西长治人,博士生,cuixueliangsj@163.com.

通讯作者:
崔学良

中图分类号: TP242
计量
- 文章访问数: 3039
- HTML全文浏览量: 97
- PDF下载量: 1243
- 被引次数: 0
出版历程
- 收稿日期: 2010-01-28
- 网络出版日期: 2010-11-30

Continuous stiffness modeling of 3-RPS parallel kinematic machine with special composite spherical joints

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

More Information

Corresponding author: Cui Xueliang

摘要

摘要: 采用矢量微分法研究了在大载荷作用下,兼顾支链和铰链刚度以及雅克比矩阵变化等影响因素的3-RPS并联机构完整连续刚度模型.基于螺旋理论分析了3-RPS并联机构支链及铰链构件所受作用力与机构外载荷之间的力平衡关系.采用矢量微分法分析了3-RPS并联机构动平台位姿变化与支链及铰链构件变形之间的关系.采用矢量微分法对机构的力学平衡方程进行微分,建立了完整的连续刚度模型,最后进行了数值模拟分析,结果表明并联机构刚度受载荷和位姿变化影响,简化刚度模型与完整刚度模型在工作空间边界处差值较大.
- 连续刚度模型 /
- 雅克比矩阵 /
- 复合球铰 /
- 螺旋理论 /
- 矢量微分法
Abstract: A comprehensive continuous modeling methodology of 3-RPS parallel machine under dynamic load condition was developed and presented by considering the stiffness of legs and joints. The variational Jacobian matrix was used through vector differential and equivalent mechanism technique. Based on the screw theory, the force equation between the dynamic load on the mobile platform and its reaction forces on the legs and joints of the 3-RPS parallel machine was investigated and analyzed. The relationship between the pose (position and orientation) distortion of the mobile platform and the elastic deformation behavior of the legs and joints on 3-RPS parallel machine was established and analyzed by vector differential. A comprehensive dynamic stiffness model of the machine was developed by adding the total differential of the residual forces on the machine system. To validate the methodology, a numerical simulation was carried out. The result shows that the stiffness model of the parallel machine is affected by the outside load and the pose of the mobile platform. There is a large difference between the simple stiffness model and the integrate stiffness model near the workspace boundary of the parallel machine.
- continuous stiffness model /
- Jacobian matrix /
- composite spherical joint /
- screw theory /
- vector differential method

HTML全文

参考文献(1)

[1] Gosselin C.Stiffness mapping for parallel manipulators[J].IEEE Transactions on Robotics and Automation,1990,6(3):377-382 [2] EI-Khasawneh B S,Ferreira P M.Computation of stiffness and stiffness bounds for parallel link manipulators[J].International Journal of Machine Tools & Manufacture,1999,39(2):321-342 [3] 王世军,黄玉美.并联机床支链刚度及载荷的确定方法[J].西安理工大学学报,2004,20(2):117-121 Wang Shijun,Huang Yumei.Determination method of branch stiffness and load for parallel machine tool[J].Journal of Xi’an University of Technology,2004,20(2):117-121(in Chinese) [4] Huang Tian,Zhao Xingyu,Whitehouse D J.Stiffness estimation of a tripod-based parallel kinematic machine[J].IEEE Transactions on Robotics and Automation,2002,18(1):50-58 [5] Anatol P,Damien C,Philippe W.Stiffness analysis of overconstrained parallel manipulators[J].Mechanism and Machine Theory,2009,44(5):966-982 [6] 陈吉清,兰凤崇. Stewart并联机构瞬时刚度分析与应用[J].南京理工大学学报,2007,31(4):482-486 Chen Jiqing,Lan Fengchong.Instantaneous stiffness analysis and application in Stewart parallel machine tools[J].Journal of Nanjing University of Science and Technology,2007,31(4):482-486(in Chinese) [7] Chen J,Lan F.Instantaneous stiffness analysis and simulation for hexapod machines[J].Simulation Modelling Practice and Theory,2008,16(4):419-428 [8] 赵铁石,赵延治,边辉,等.空间并联机构连续刚度非线性映射[J].机械工程学报,2008,44(8):20-25 Zhao Tieshi,Zhao Yanzhi,Bian Hui,et al.Continuous stiffness nonlinear mapping of spatial parallel mechanism[J].Chinese Journal of Mechanical Engineering,2008,44(8):20-25(in Chinese) [9] 曾宪菁.球面并联机构运动学设计理论与方法 .天津:天津大学机械工程学院,2001 Zeng Xianjing.The kinematics design of spherical parallel manipulator .Tianjin:School of Mechanical Engineering,Tianjin Unversity,2001(in Chinese) [10] 黄真,赵永生,赵铁石.高等空间机构学[M].北京:高等教育出版社,2006:29-30 Huang Zhen,Zhao Yongsheng,Zhao Tieshi.Advanced spatial mechanism[M]. Beijing:Higher Education Press,2006:29-30(in Chinese) [11] 蔡自兴.机器人学[M].北京:清华大学出版社,2000:66-72 Cai Zixing.Robotics[M].Beijing:Tsinghua University Press,2000:66-72(in Chinese)

施引文献

资源附件(0)

访问统计