Dynamic optimization method for valve plate structure of aviation piston pump
-
摘要: 通过详细分析航空柱塞泵排油过程中的过流面积变化,同时考虑油液的压缩性和柱塞泵的泄漏,建立了航空柱塞泵瞬时流量的非线性数学模型.提出了一种航空柱塞泵配流盘结构的动态优化方法,该优化方法以航空柱塞泵瞬时流量脉动幅值最小为优化目标,采用旋转矢量法对配流盘结构参数进行实时在线寻优.仿真结果表明:该动态优化方法具有很高的效率和实用性,为航空柱塞泵的结构优化设计和消震、降噪研究提供了有力的理论依据.Abstract: Through the discharge area of aviation piston pump was calculated accurately, and the compressibility of oil and leakage of cylinder were considered, the nonlinear mathematical model of instantaneous flow rate was established. A dynamic optimization method of valve plate structure was proposed based on the nonlinear instantaneous flow model. The amplitude of instantaneous flow fluctuation was the objective function of the dynamic optimization method. With rotate-vector method, the structural parameters of valve plate were optimized on line dynamically. The simulation results indicate that the dynamic optimization method is high practical and efficient. This provides the theoretical foundation to the structural optimization of aviation piston pump, and the study of vibration elimination and noise reduction.
-
Key words:
- piston pump /
- valve plate /
- instantaneous flow model /
- dynamic optimization /
- rotate-vector method /
- flow fluctuation
-
[1] Casoli P,Vacca A,Franzoni G,et al.Modelling of fluid properties in hydraulic positive displacement machines[J].Simulation Modelling Practice and Theory,2006,14:1059-1072 [2] Bolinger J W.Considerations for hydrostatic system noise control //SAE International off-Highway Meeting and Exposition.Milwaukee,WI:SAE,1982:29-41 [3] Ganesh K S,Monika Ivantysynova.Impact of valve plate design on noise,volumetric efficiency and control effort in an axial piston pump //ASME 2006 International Mechanical Engineering Congress and Exposition.Chicago,USA:Fluid Power Systems and Technology Division,2006:77-84 [4] 林静,孙明智.轴向柱塞泵配流盘结构对流量脉动的影响[J].流体传动与控制,2007,3(22):32-35 Lin Jing,Sun Mingzhi.Influence of port plate structure on flow fluctuation of axial piston pump[J].Fluid Power Transmission and Control,2007,3(22):32-35(in Chinese) [5] 马吉恩.轴向柱塞泵流体噪声及配流盘优化设计 .杭州:浙江大学机械工程学系,2009:117-128 Ma Jien.Study on flow ripple and valve plate optimization of axial piston pump .Hangzhou:Department of Mechanical Engineering,Zhejiang University,2009:117-128(in Chinese) [6] 那成烈,尹文波,那焱青.可压缩流体工作介质情况下轴向柱塞泵配流盘设计[J].甘肃工业大学学报,2002,28(4):65-67 Na Chenglie,Yin Wenbo,Na Yanqing.Design of valve plate of axial piston pump with compressible working medium [J].Gansu University of Technology,2002,28(4):65-67(in Chinese) [7] Manring N D.The discharge flow ripple of an axial-piston swash-plate type hydrostatic pump[J].Journal of Dynamic Systems,Measurement and Control,2000,122:263-268 [8] 那成烈,叶敏,孙淇余.轴向柱塞泵减振孔和减振槽的计算与特性分析[J].甘肃工业大学学报,1988,14(1):9-19 Na Chenglie,Ye Min,Sun Qiyu.Calculation and performance analysis of damping orifices and damping channels of axial piston pumps[J].Journal of Lanzhou University of Technology,1988,14(1):9-19(in Chinese) [9] 郭卫东,王占林.斜盘式轴向柱塞泵实际流量的分析研究[J].北京航空航天大学学报,1996,22(2):223-227 Guo Weidong,Wang Zhanlin.Analysis for the real flowrate of a swash plate axis piston pump[J].Journal of Beijing University of Aeronautics and Astronautics,1996,22(2):223-227(in Chinese) [10] 李玉琳.液压元件与系统设计[M].北京:北京航空航天大学出版社,1997:45-46 Li Yulin.Design of hydraulic component and system [M].Beijing:Beijing University of Aeronautics and Astronautics Press,1997:45-46(in Chinese) [11] 焦宗夏,路甬祥.新型的工程优化方法:旋转矢量法[J].机械工程学报,1996,32(6):45-50 Jiao Zongxia,Lu Yongxiang.New engineering optimization method-the rotatevector method[J].Chinese Journal of Mechanical Engineering,1996,32(6):45-50(in Chinese)
点击查看大图
计量
- 文章访问数: 3170
- HTML全文浏览量: 192
- PDF下载量: 932
- 被引次数: 0