Monitoring system for vehicle overloading base on paste-type strain sensor
-
摘要: 针对车辆超载运输,深入研究了车载称重技术,设计了基于车载称重装置的短消息技术的车辆超载监测系统.利用安装在汽车钢板弹簧上的粘贴式应变传感器测量车辆钢板弹簧承受的载荷信息,计算显示车辆总载荷,在车辆超载的情况下车辆超载监测装置启动车载短消息终端以短消息形式发送超载信息,并将数据提供给相关部门.系统经过反复的试验验证,能够准确地检测出车辆的载重状态,可用于交通部门和路政部门对载重车辆进行收费、管理和处罚.Abstract: The on-board weighing technology was studied for the overloading of vehicle. A monitoring system was designed for overloading based on the on-board weighing device and short message technology. The system used paste-type strain sensor that installed in vehicle-s leaf spring to obtain load on the leaf spring and then calculated and displayed the total load of vehicle. When vehicle is overloaded the monitoring device control on-board short message terminals to send a short message of overloading,also it provided data to the relevant departments. The system can accurately detect the vehicle load after repeated verification, which can be used for the departments of transportation and highways to charge, manage and punish the loading vehicle.
-
Key words:
- strain sensor /
- overloading /
- singlechip /
- leaf spring /
- monitoring system
-
[1] 周静.交通运输超限超载的原因与治理[J].交通科技与经济,2008,10(6):117-119 Zhou Jing.The Causes and treatment of transpertation overloading[J].Technology and Economy in Areas of Communications,2008,10(6):117-119(in Chinese) [2] 苏颂.公路货运超限超载的治理[J].黑龙江交通科技,2007,30(12):115-116 Su Song.Governance of road freight overloading[J].Communications Science and Technology Heilongjiang,2007,30(12):115-116(in Chinese) [3] 林颖,李文举,常永贵,等.基于ARM的车载称重系统[J].仪表技术与传感器,2008(3):28-30 Lin Ying,Li Wenju,Chang Yonggui,et al.Vehicle weighing system based on ARM[J].Instrument Technique and Sensor,2008(3):28-30(in Chinese) [4] 徐树山.车载电容称重装置研制[J].仪器仪表学报,2008,29(5):973-976 Xu Shushan.Research and development of capacitance weighing device[J].Chinese Journal of Sceientific Instrument,2008,29(5):973-976(in Chinese) [5] 强宝民,周台发,王卫辉.大型起重转载设备稳定性监[J].计算机测量与控制,2005,13(8):751-832 Qiang Baomin,Zhou Taifa,Wang Weihui.Stability monitoring of large-scale hoisting transfer equipment[J].Computer Measurement and Control,2005,13(8):751-832(in Chinese) [6] 朱杰,明平顺.载重汽车荷重测量方法初探[J].武汉汽车工业大学学报,1996,18(4):6-9 Zhu Jie,Ming Pingshun.Measurement of truck loads[J].Journal of Wuhan Automotive Polytechnic University,1996,18(4):6-9(in Chinese) [7] 陈道烔,高上忠,高志峰,等.车载动态称重系统的研究[J] .汽车技术,2008(6):8-12 Chen Daojiong,Gao Shangzhong,Gao Zhifeng,et al.Research of truck-mounted dynamic weighing system[J].Automobile Technology,2008(6):8-12(in Chinese) [8] 胡汉才.单片机原理及其接口技术[M].2版.北京:清华大学出版社,2004 Hu Hancai.Single-chip microcomputer principle and interface technology[M].2nd ed.Beijing:Tsinghua University Press,2004(in Chinese) [9] 马应林.车辆超载动态监测系统的研究与实现 .北京:北京交通大学机械与电子控制工程学院,2010 Ma Yinglin.Research and implementation of dynamic monitoring system for vehicle overloading .Beijing:School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong University,2010(in Chinese) [10] 郁有文,常健,程继红.传感器原理及工程应用[M].西安:西安电子科技大学出版社,2003 Yu Youwen,Chang Jian,Cheng Jihong.Principles and engineering applications of sensors[M].Xi’an:Xidian University Press,2003(in Chinese) [11] 余祖俊.微机检测与控制应用系统设计[M].北京:北京交通大学出版社,2001 Yu Zujun.Application of computer measurement and control system design[M].Beijing:Beijing Jiaotong University Press,2001(in Chinese) [12] 杨飞,陈广华,马应林,等.基于粘贴式应变称重传感器的设计[J].机械与电子,2010(2):13-16 Yang Fei,Chen Guanghua,Ma Yinglin,et al.Design of past-type strain weighing sensor[J].Machinery & Electronics,2010(2):13-16(in Chinese) [13] 胡伟,季晓衡.单片机C程序设计及应用实例[M].北京:人民邮电出版社,2003 Hu Wei,Ji Xiaoheng.C single-chip design and application procedures[M].Beijing:Posts & Telecommunications Press,2003(in Chinese)
点击查看大图
计量
- 文章访问数: 3609
- HTML全文浏览量: 234
- PDF下载量: 1115
- 被引次数: 0