[1] 阚杰,郝亮,李涛,等.机械冷板冷藏车的发展与改进方向[J].制冷与空调,2005,5(5):58-60 Kan Jie,Hao Liang,Li Tao,et al.The development and modification direction of the hold-over plate refrigerated vehicles[J].Refrigeration and Air Conditioning,2005,5(5):58-60(in Chinese) [2] Fukai J,Hamada Y,Morozumi Y,et al.Effect of carbon-fiber brushes on conductive heat transfer in phase change materials[J].International Journal of Heat and Mass Transfer,2002,45(24):4781-4792 [3] Py X,Olives R,Mauran S.Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material[J].International Journal of Heat and Mass Transfer,2001,44(14):2727-2737. [4] 张正国,王学泽,方晓明.石蜡/膨胀石墨复合相变材料的结构与热性能[J].华南理工大学学报:自然科学版,2006,34(3):1-5 Zhang Zhengguo,Wang Xueze,Fang Xiaoming.Structure and thermal properties of composite paraffin/expanded graphite phase-change material[J].Journal of South China University of Technology:Natural Science Edition,2006,34(3):1-5 (in Chinese) [5] Velraj R,Seeniraj R V,Hafner B.Heat transfer enhancement in a latent heat storage system[J].Solar Energy,1999,65(3):171-180 [6] Padmanabhan P V,Murthy M V.Outward phase change in a cylindrical annulus with axial ns on the inner tube[J].International Journal of Heat and Mass Transfer,1986,29(12):1855-1868 [7] Siegel R.Solidification of low conductivity material containing dispersed high conductivity particles[J].International Journal of Heat and Mass Transfer,1977,20(10):1087-1089 [8] Velraj R,Seeniraj R,Hafner B,et al.Experimental analysis and numerical modelling of inward solidification on a finned vertical tube for a latent heat storage unit[J].Solar Energy,1997,60(5):281-290 [9] 曹建光,步柄根,李强,等.泡沫铝在相变储能装置中的应用 //《卫星热控制技术研讨会论文集》编委会.卫星热控制技术研讨会论文集.北京:中国人民解放军总装备部卫星技术专业组,2003:297-305 Cao Jianguang,Bu Binggen,Li Qiang,et al.The application of aluminum in the phase change energy storage devices // Editorial Committee of Seminar Memoirs of the Thermal Controlling Technology for Satellite.Discussion Forum Symposium of the Thermal Controlling Technology for Satellite.Beijing:Satellite Technology Group of Master Equipment Ministry of PLA,2003:297-305 (in Chinese) [10] Hoogendoorn C J,Bart G C J.Performance and modelling of latent heat stores[J].Solar Energy,1992,48(1):53-58 [11] 张涛,余建祖.泡沫铜作为填充材料的相变储热实验[J].北京航空航天大学学报,2007,33(9):1021-1024 Zhang Tao,Yu Jianzu.Experiment of solid-liquid phase change in copper foam[J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(9):1021-1024 (in Chinese) [12] 张涛,余建祖.相变装置中填充泡沫金属的传热强化分析[J].制冷学报,2007,28(6):13-17 Zhang Tao,Yu Jianzu.Analysis on thermal conductivity enhancement for PCM embedded in metal foam[J].Journal of Refrigeration,2007,28(6):13-17 (in Chinese) [13] Krishnan S,Murthy J Y,Garimella S V.A two-temperature model for solid-liquid phase change in metal foams[J].Journal of Heat Transfer,2005,127(9):995-1004 [14] Alawadhi E M,Amon C H.PCM thermal control unit for portable electronic devices:experimental and numerical studies[J].IEEE Trans Compon Packag Technol,2003,26(1):116-125 [15] Ali S Siahpush.Performance enhancement of solid/liquid phase-change thermal energy storage systems through the use of a high conductivity porous metal matrix. Idaho:Department of Mechanical Engineering,University of Idaho,2002 [16] 杨世铭,陶文铨.传热学[M].3版.北京:高等教育出版社,1998:173-174 Yang Shiming,Tao Wenquan.Heat transfer[M].3rd ed.Beijing:Higher Education Press,1998:173-174 (in Chinese)
|