Method of modeling transient two-phase flow in injector
-
摘要: 为了研究柴油机喷油器内部的气穴现象,采用一种新的方法建模并进行瞬态两相流动的数值模拟. 首先求解针阀开启时刻的稳态流场,然后导入自编的程序进行瞬态流场的计算. 自编程序是基于Fluent提供的用户自定义函数,用于控制模型边界条件,分析针阀受力情况和计算其运动速度. 初始计算条件来自稳态流场,每一步瞬态计算都依赖之前流场的计算结果. 这种建模方法保证了数值模拟的连贯性和真实性,确定喷油器初始条件就可以完整地计算喷油过程,得到每一时刻喷油器内部的压力分布和两相流分布等数据. 研究结果表明,这种新的建模方法是可行和有效的,其数值模拟结果和实验结果相吻合,并能揭示出喷油器喷嘴入口处气穴现象的产生、发展和消失过程,是进一步深入开展柴油喷油系统两相流动特性研究的一种新的途径.Abstract: A new method was applied in modeling and numerical simulation in transient two-phase flow inside a diesel injector for cavitation study. The simulation was started in steady flow when the needle valve was just about to be lifted and then contined to compute unsteady flow with self-made program. User define function(UDF) provided by Fluent was used in definition of boundary condition, force analysis of needle valve and computation of its speed. The initial condition was from steady flow field then every unsteady computation was decided by former flow field. This method assured numerical simulation consistent and authentic. It is possible to simulate the whole fuel injection with injector's initial condition and get statistics of pressure and phase volume fraction distribution at any time inside an injector. Simulation results are close to experiment results and it evidences that this new modeling method is valid and reliable. Cavitation commencement, expansion and disappearance are revealed during fuel injection. This modeling method provides a new way to further study two-phase flow inside diesel injection system.
-
Key words:
- diesel injector /
- cavitation /
- transient characteristic /
- numerical simulation
-
[1] He Yongling,Zhao Zhihe,Liu Jianxin,et al.Two-phase flow of liquid-gas in diesel fuel injection system and their effect on engine performances[J].International Journal of Thermal and Fluid Sciences,2001,10(3):223-227 [2] 徐波,张宗杰,戚茂国,等.柴油机多孔式喷油嘴中燃油三维流动分析[J].现代车用动力,2005,2:17-22 Xu Bo,Zhang Zongjie,Qi Maoguo,et al.Analysis of the flow in the nozzle of a multi-hole diesel engine injector[J].Modern Vehicle Power,2005,2:17-22(in Chineses) [3] 何志霞,王谦,李德桃,等,高压共轨喷油器内非稳态流动数值模拟分析[J].江苏大学学报,2007,28(2):142-146 He Zhixia,Wang Qian,Li Detao,et al.Numerical simulation of transient flow in high pressure common rail injector[J].Journal of Jiangsu University,2007,28(2):142-146(in Chinese) [4] 汪翔,苏万华.空化过程对柴油喷嘴内流特性的影响[J].内燃机学报,2007,25(6):481-487 Wang Xiang,Su Wanhua.The influence of cavitation processes on the internal flow characteristics of diesel injector nozzle[J].Trandaction of CSICE,2007,25(6):481-487(in Chinese) [5] Lee W G,Reitz R D.A numerical investigation of transient flow and cavitation within minisac and VCO diesel injector nozzles //Proceedings of ASME Internal Combustion Engine Division 2009 Spring Technical Conference.Wisconsin Milwaukee,USA:ICES2009,2009:643-652 [6] Som S,Aggarwal S K,EI-Hannouny E M,et al.Investigation of nozzle flow and cavitation characteristics in a diesel injector[J].Journal of Engineering for Gas Turbines and Power,2010,132:042802 [7] 张思超.柴油机喷油系统油气两相流模拟研究 .北京:北京航空航天大学交通科学与工程学院,2008 Zhang Sichao.Simulation research of fuel-gas two-phaseflow in the fuel injection system of diesel engine .Beijing: School of Transportation Science and Engineering,Beijing University of Aeronautics and Astronautics,2008(in Chinese) -
点击查看大图
计量
- 文章访问数: 2379
- HTML全文浏览量: 51
- PDF下载量: 796
- 被引次数: 0
下载:
