面齿轮齿面的自适应采样方法

张俐; 丁志耀; 王延忠

面齿轮齿面的自适应采样方法

北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目: 航空科学基金资助项目(20090451008); 国家自然科学基金资助项目(50875009)

详细信息

中图分类号: TH 132.41
计量
- 文章访问数: 2255
- HTML全文浏览量: 66
- PDF下载量: 474
- 被引次数: 0
出版历程
- 收稿日期: 2010-09-30
- 网络出版日期: 2012-02-29

Adaptive sampling method of face gear tooth surface

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 面齿轮齿面的数字化是齿面检测的关键技术之一.针对在三坐标测量机上进行的齿面采样,提出一种根据给定精度确定采样网格点数量的方法:对采样网格边界线进行初步自适应,利用截平面法得到初始采样网格;同时根据给定的采样网格点数量,借助基于形状的采样算法,对初始采样网格进行迭代,生成自适应采样网格,最终实现面齿轮齿面数字化检测采样的自适应规划.
- 面齿轮齿面 /
- 采样网格 /
- 自适应
Abstract: Digitizing of face gear tooth surface is one of the key technologies on the tooth surface measurement. Aiming at the sampling of tooth surface on CMM(coordinate measuring machine), a method to determine the quantity of the sampling mesh points according to given precision was presented. The boundary lines of sampling mesh were adapted firstly and the initial sampling mesh could be achieved by the method of cutting-planes. According to the given quantity of the sampling mesh points, there was iterative computation for the initial sampling mesh by the adaptive sampling algorithm based on the measure of curvature, and then the adaptive programming method of face gear tooth surface was developed.
- face gear tooth surface /
- sampling mesh /
- adaption

HTML全文

参考文献(9)

[1]	来新民,黄田.数学模型已知的自由曲面自适应采样[J].计算机辅助设计与图形学学报,1999,11(4):359-362 Lai Xinmin,Huang Tian.Adaptive sampling of digitizing for the known free-form surface[J].Journal of Computer Aided Design and Computer Graphics,1999,11(4):359-362(in Chinese)
[2]	Menq Chiahsiang,Yan Hongtzong.Automated precision measurement of surface profile in CAD-direction inspection[J].IEEE Transactions on Robotics and Automation,1992,8(2):268-278
[3]	Cho M W,Lee H,Yoon G S,at al.A feature-based inspection planning system for coordinate measuring machines[J].International Journal of Advanced Manufacturing Technology,2005,26(9/10):1078-1087
[4]	李剑.自由曲面零件的寻位自适应检测方法研究[J].仪器仪表学报,2002,23(5):530-533 Li Jian.State searching adaptive measuring technique for free-form surface parts[J].Chinese Journal of Scientific Instrument,2002,23(5):530-533(in Chinese)
[5]	任玉波,孙惠学.CAD模型已知的自由曲面在线检测方法研究[J].精密制造与自动化,2006,3:15-17 Ren Yubo,Sun Huixue.Research on in-process inspection method for CAD model known free curved-surface[J].Precise Manufacturing & Automation,2006,3:15-17(in Chinese)
[6]	朱如鹏.面齿轮传动的啮合特性研究 .南京:南京航空航天大学机电学院,2000 Zu Rupeng.Research on meshing characteristic of face gear drive .Nanjing:College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,2000(in Chinese)
[7]	Li S Z.Adaptive sampling and mesh generation[J].Computer-Aided Design,1995,27(3):235-240
[8]	梅向明,黄敬之.微分几何[M].北京:高等教育出版社,1981 Mei Xiangming,Huang Jingzhi.Differential geometry[M].Beijing:Higher Education Press,1981(in Chinese)
[9]	陈浪.基于三坐标测量机的曲面自适应采样和网格生成[J].重庆大学学报:自然科学版,2001,24(4):22-25 Chen Lang.Study on adaptive sampling and mesh generation of free-form surfaces based on coordinate measuring machine[J].Journal of Chongqing University:Natural Science Edition,2001,24(4):22-25(in Chinese)