适合多种机床结构的数控系统5坐标变换库

靳阳; 郇极; 肖文磊; 郭成军

适合多种机床结构的数控系统5坐标变换库

北京航空航天大学, 机械工程及自动化学院, 北京 100191

详细信息

中图分类号: TG659
计量
- 文章访问数: 3468
- HTML全文浏览量: 226
- PDF下载量: 649
- 被引次数: 0
出版历程
- 收稿日期: 2011-04-12
- 网络出版日期: 2012-06-30

5-coordinate transformation technology of CNC system for a variety of structures of machine tools

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 研究了适合多种结构布局形式的统一坐标变换方法,开发出数控系统5坐标变换函数库,并作为坐标变换控制模块集成到数控系统中.分析了5坐标数控机床运动学模型,归纳出12种5坐标数控机床结构布局,并推导了对应的坐标变换数学算法.通过结构分析和数学变换将12种算法扩展归纳到3类基础算法,并基于3类基础算法开发出适合多种机床结构布局的5坐标变换库.利用机床三维仿真系统验证了5坐标变换库的可行性,并将该坐标变换库集成到北京航空航天大学开发的CH-2010开放式数控系统中.
- 5坐标数控机床 /
- 坐标变换 /
- 数控系统
Abstract: The uniform method of coordinate transformation was studied, which is suited for a variety of structures of 5-axis machine tool. CNC(computer numerical control) coordinate transformation library was developed, which could be integrated into CNC system as a coordinate transformation control module. The kinematics of 5-axis machine tool was analyzed, 12 types of 5-axis machine tool structure were listed, and the corresponding coordinate transformation algorithms were derived. 3 types of basic algorithms were obtained through mathematical transformation, and a 5-coordinate transformation library was developed based on the basic algorithms. The feasibility of 5-coordinate transformation library was verified by a 3D simulation system, and the library was integrated into CH-2010 open CNC system developed by Beijing University of Aeronautics and Astronautics.
- 5-axis machine tool /
- coordinate transformation /
- CNC(computer numerical control) system

HTML全文

参考文献(10)

[1]	任永强,杨建国.五轴数控机床综合误差补偿解耦研究[J].机械工程学报,2004,40(2):55-59 Ren Yongqiang,Yang Jianguo.Study on decoupling of synthesis error compensation for a 5-axis CNC machine tool[J].Chinese Journal of Mechanical Engineering,2004,40(2):55-59(in Chinese)
[2]	王丹,陈志同,陈五一.五轴加工中非线性误差的检查和处理方法[J].北京航空航天大学学报,2008,34(9):1003-1006 Wang Dan,Chen Zhitong,Chen Wuyi.Detection and control of non-linear errors in 5-axis machining[J].Journal of Beijing University of Aeronautics and Astronautics,2008,34(9):1003-1006(in Chinese)
[3]	李永桥,陈强,谌永祥.五坐标加工中非线性误差校核及超差处理方法的研究[J].制造技术与机床,2010(8):100-102 Li Yongqiao,Chen Qiang,Chen Yongxiang.Research on check of the non-linear errors and processing method for over-proof in 5-axis NC machining[J].Manufacturing Technology & Machine Tool,2010(8):100-102(in Chinese)
[4]	GE Fanuc Automation.FANUC series 30i user-s manual.B-63944EN/03,2008
[5]	梁全,王永章.五轴数控系统RTCP和RPCP技术应用[J].组合机床与自动化加工技术,2008(2):62-65 Liang Quan,Wang Yongzhang.Study on the RTCP and RPCP function of the 5-axis CNC[J].Modular Machine Tool & Automatic Manufacturing Technique,2008(2):62-65(in Chinese)
[6]	SIEMENS.SINUMERIK 840D sl NCU manual.6FC5397-0AP10-2BA0,2007
[7]	Xiao Wenlei,Liu Yanqiang,Loeis K.A universal virtual manufacturing system for cutting machines //Proceedings of International Conference on Advanced Technology of Design and Manufacture.London:Institution of Engineering and Technology,2010:374-379
[8]	Lee R S,She C H.Developing a postprocessor for three types of five-axis machine tools[J].International Journal of Advanced Manufacturing Technology,1997,13:658-665
[9]	She C H,Chang C C.Design of a generic five-axis postprocessor based on generalized kinematics model of machine tool[J].International Journal of Machine Tools & Manufacture,2007(47):537-545
[10]	She C H,Lee R S.A postprocessor based on the kinematics model for general five-axis machine tools[J].Journal of Manufacturing Processes,2000,2(2):131-141