T300/QY8911单向板湿热性能模拟与损伤分析

齐忠新; 燕瑛; 刘玉佳; 何明泽

T300/QY8911单向板湿热性能模拟与损伤分析

北京航空航天大学航空科学与工程学院, 北京 100191

基金项目: 国家973计划资助项目(2011CB606105)

详细信息

中图分类号: V214.8
计量
- 文章访问数: 3046
- HTML全文浏览量: 376
- PDF下载量: 677
- 被引次数: 0
出版历程
- 收稿日期: 2011-04-14
- 网络出版日期: 2012-07-30

Hygrothermal properties simulation and damage analysis of T300/QY8911 undirectional laminates

School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 测试了不同湿热条件下T300/QY8911单向板的弯曲性能,建立了湿热条件下复合材料单向板的弯曲有限元模型,模拟了湿热条件下T300/QY8911单向板的弯曲性能,开发了复合材料损伤演化仿真模块,对湿热条件下T300/QY8911单向板弯曲损伤演化过程进行了仿真.结果表明:湿热条件下T300/QY8911单向板的弯曲模量具有较高的保持率,弯曲强度随湿热条件的变化差异较大,模量和强度的模拟结果与试验值的误差分别小于6%和2%,建立的弯曲有限元模型,能够比较准确地预测不同湿热条件下复合材料单向板的弯曲性能.
- 单向板 /
- 湿热条件 /
- 弯曲性能 /
- 损伤演化 /
- 渐进失效
Abstract: Flexural properties of T300/QY8911 undirectional laminates were tested under different hygrothermal conditions. Finite element models of composite undirectional laminates under hygrothermal conditions were built. The flexural properties of T300/QY8911 undirectional laminates tested in experimentation were simulated. Plus, a damage evolution simulation module of composite was developed. The integrated damage evolution process of T300/QY8911 undirectional laminates under hygrothermal conditions was simulated. Results show that, the flexural modulus of T300/QY8911 undirectional laminates remains unchanged under different hygrothermal conditions, but the flexural strength changes greatly with conditions. For flexural modulus, the error between simulation values and test results is less than 6%, and for flexural strength, it is less than 2%. The finite element models can predict flexural properties of composite undirectional laminates under different hygrothermal conditions relative exactly.
- undirectional laminates /
- hygrothermal conditions /
- flexural properties /
- damage evolution /
- progressive failure

HTML全文

参考文献(13)

[1]	Tsai Y I,Bosze E J,Barjasteh E,et al.Influence of hygrothermal environment on thermal and mechanical properties of carbon fiber/fiberglass hybrid composites[J].Composites Science and Technology,2009,69(3/4):432-437
[2]	Benkhedda A,Tounsi A,Adda-bedia E A.Effect of temperature and humidity on transient hygrothermal stresses during moisture desorption in laminated composite plates[J].Composite Structures,2008,82(4):629-635
[3]	Amara K H,Tounsi A,Benzair A.Transverse cracking and elastic properties reduction in hygrothermal aged cross-ply laminates[J].Materials Science and Engineering A,2005,396(1/2):369-375
[4]	Adda-bedia E A,Bouazza B,Tounsi A,et al.Prediction of stiffness degradation in hygrothermal aged _s composite laminates with transverse cracking[J].Journal of Materials Processing Technology,2008,199(1/2/3):199-205
[5]	Chinmay Kumar Kundu,Jae-Hung Han.Nonlinear buckling analysis of hygrothermoelastic composite shell panels using finite element method[J].Composites Part B:Engineering,2009,40(4):313-328
[6]	李敏,张宝艳.改性双马树脂/碳纤维复合材料体系耐湿热性能研究[J].热固性树脂,2006,21(5): 25-27 Li Min,Zhang Baoyan.Study on the hydrothermal properties of a modified bismaleimide resin/carbon fiber composite[J].Thermosetting Resin,2006,21(5): 25-27(in Chinese)
[7]	冯青,李敏,顾轶卓,等.不同湿热条件下碳纤维/环氧复合材料湿热性能实验研究[J].复合材料学报,2010,27(6):16-20 Feng Qing,Li Min,Gu Yizhuo,et al.Experimental research on hygrothermal properties of carbon fiber/epoxy resin composite under different hygrothermal conditions[J].Acta Materiae Compositae Sinica,2010,27(6):16-20(in Chinese)
[8]	封彤波,肇研,罗云烽,等.不同上浆剂的国产碳纤维复合材料湿热性能研究[J].材料工程,2009(10):36-40 Feng Tongbo,Zhao Yan,LuoYunfeng,et al.Hygrothermal property of CCF/ BMI composites with different sizing on the carbon fiber[J].Material Engineering,2009(10):36-40(in Chinese)
[9]	苏佳智,顾轶卓,李敏,等.弯曲载荷下碳纤维/双马复合材料湿热特性实验研究[J].复合材料学报,2009,26(5):80-85 Su Jiazhi,Gu Yizhuo,Li Min,et al.Hygrothermal behavior of carbon fiber/bismaleimide resin composite under flexural load[J].Acta Materiae Compositae Sinica,2009,26(5):80-85(in Chinese)
[10]	刘兵山,燕瑛,田金梅.纤维增强对称层合复合材料的宏观热膨胀系数研究[J].强度与环境,2008,35(5):17-24 Liu Bingshan,Yan Ying,Tian Jinmei.Study on the macro thermal expansion coefficients of fiber-reinforced symmetric laminates[J].Structure & Environment Engineering,2008,35(5):17-24(in Chinese)
[11]	闫伟,燕瑛,苏玲.湿/热/力耦合环境下复合材料结构损伤分析与性能研究[J].复合材料学报,2010,27(2):113-116 Yan Wei,Yan Ying,Su Ling.Damage analysis and strength prediction of composites structures in hygrothermal environment[J].Acta Materiae Compositae Sinica,2010,27(2):113-116(in Chinese)
[12]	黄远,万怡灶,何芳,等.碳纤维/环氧树脂单向复合材料的吸湿残余应力研究[J].航空材料学报,2009,29(4):57-62 Huang Yuan,Wan Yizao,He Fang,et al.Study on residual stresses induced by moisture absorption in unidirectional carbon fiber/epoxy resin composites[J].Journal of Aeronautical Materials,2009,29(4):57-62(in Chinese)
[13]	王彦君,阳建红,张晖.芳纶纤维/环氧树脂复合材料的吸湿应力分析[J].宇航材料工艺,2010(6):41-44 Wang Yanjun,Yang Jianhong,Zhang Hui.Analysis of moisture stress in aramid fiber/epoxy resin composites[J].Astronautics Materials Technology,2010(6):41-44(in Chinese)