留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

谐振式微光学陀螺标度因数及其非线性度分析

洪灵菲 张春熹 冯丽爽 于怀勇

杜少辉, 洪 杰, 谢里阳等 . 航空发动机断裂关键件失效率分析[J]. 北京航空航天大学学报, 2009, 35(4): 464-467.
引用本文: 洪灵菲, 张春熹, 冯丽爽, 等 . 谐振式微光学陀螺标度因数及其非线性度分析[J]. 北京航空航天大学学报, 2012, 38(8): 1046-1050.
Du Shaohui, Hong jie, Xie Liyanget al. Failure risk analysis for fracture critical aero-engine components[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(4): 464-467. (in Chinese)
Citation: Hong Lingfei, Zhang Chunxi, Feng Lishuang, et al. Investigation on scale factor and output nonlinearity in resonator micro-optic gyro[J]. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(8): 1046-1050. (in Chinese)

谐振式微光学陀螺标度因数及其非线性度分析

基金项目: 国家自然科学基金资助项目(50875015)
详细信息
  • 中图分类号: TN 815;TN 911.74

Investigation on scale factor and output nonlinearity in resonator micro-optic gyro

  • 摘要: 谐振式微光学陀螺(RMOG, Resonator Micro-Optic Gyro)输出标度因数非线性度在大角速度应用时变得明显,影响陀螺性能.理论分析了RMOG中频率调制偏置量对标度因数及其非线性度的影响;根据RMOG谐振腔的谐振输出特性,仿真计算了输入角速度范围内的理论标度因数及其非线性度.利用已知的温度性能测试结果建立了标度因数温度误差模型.搭建RMOG实验系统,实际测量输出标度因数~0.95.模拟和实际转动实验得到±500(°)/s范围内标度因数非线性度分别为6.88×10-4和0.93%,表明通过有效消除环境因素影响,可以使RMOG的输出非线性度满足多数惯性应用的要求.

     

  • [1] Hervé C Lefèvre.光纤陀螺仪[M].张桂才,王巍,译.北京:国防工业出版社,2002 Hervé C Lefèvre.The fiber-optic gyroscope[M].Translated by Zhang Guicai,Wang Wei.Beijing:National Defence Industry Press,2002
    [2] Strandjord L K,Sanders G A.Effects of imperfect serrodyne phase modulation in resonator fiber optic gyroscopes //Depaula R P.SPIE Fiber Optic and Laser Sensors XII. :IEEE,1994,2292:272-282
    [3] 冯丽爽,洪灵菲,杜哲峰,等.微光学陀螺双频率调制理论与实验研究[J].传感技术学报,2008,21(2):341-345 Feng Lishuang,Hong Lingfei,Du Zhefeng,et al.Research on the theory and experiment of double-frequency modulation for MOG[J].Chinese Journal of Sensors and Actuators,2008,21(2):341-345(in Chinese)
    [4] Hotate K,Harumoto M.Resonator fiber optic gyro using digital serrodyne modulation[J].Journal of Lightwave Technology,1997,15(3):466-473
    [5] Ying Diqing,Ma Huilian,Jin Zhonghe.Resonator fiber optic gyro using the triangle wave phase modulation technique[J].Optics Communications,2008,281(4):580-586
    [6] 冯翔,马迎建,于怀勇,等.谐振式微光学陀螺最佳灵敏度调节的研究[J].中国激光,2010,37(4):1064-1067 Feng Xiang,Ma Yingjian,Yu Huaiyong,et al.Investigation on the modulation of the optimized sensitivity for the resonator optic gyroscope[J].Chinese Journal of Lasers,2010,37(4):1064-1067(in Chinese)
    [7] 王马华,崔一平,张彤.集成光学陀螺最佳调制频率确定的研究[J].电子器件,2007,30(6):2291-2293 Wang Mahua,Cui Yiping,Zhang Tong.Investigation on the determination of the optimized modulating frequency for R-IOG [J].Chinese Journal of Electron Devices,2007,30(6):2291-2293(in Chinese)
    [8] 金靖,潘雄,宋凝芳,等.方波调制误差对光纤陀螺的影响分析与实验[J].红外与激光工程,2008,37(2):355-358 Jin Jing,Pan Xiong,Song Ningfang,et al.Analyses and experiments of effects of square wave modulation errors on fiber optic gyroscope [J].Infrared and Laser Engineering,2008,37(2):355-358(in Chinese)
    [9] 王新国,李家垒,许化龙,等.光纤陀螺温度和标度因数非线性误差建模研究[J].系统仿真学报,2007,19(9):1922-1924 Wang Xinguo,Li Jialei,Xu Hualong,et al.Research of FOG’s error modeling based on temperature and scale factor nonlinearity [J].Journal of System Simulation,2007,19(9):1922-1924(in Chinese)
    [10] 耿凡,李彩芬,王向群,等.光纤陀螺用集成光学多功能芯片的研制[J].红外与激光工程,1997,26(1):54-56 Geng Fan,Li Caifen,Wang Xiangqun,et al.Integrated optic multifunction chip fabrication for fiber optic gyroscope [J].Infrared and Laser Engineering,1997,26(1):54-56(in Chinese)
    [11] 金靖,张春熹,宋凝芳,等.数字闭环光纤陀螺死区非线性机理[J].北京航空航天大学学报,2007,33(9):1046-1050 Jin Jing,Zhang Chunxi,Song Ningfang,et al.Dead band nonlinearity of digital closed-loop FOG [J].Journal of Beijing University of Aeronautics and Astronautics,2007,33(9):1046-1050 (in Chinese)
    [12] 杨远洪,张惟叙,马静.Y波导电光调制器半波电压新型测试方法 //中国惯性技术学会第四届学术年会论文集.北海,中国:中国惯性技术学会,1999:158-161 Yang Yuanhong,Zhang Weixu,Ma Jing.Novel measure scheme for half-wave voltage of Y-tap electro-optic modulator //The Fourth Chinese Annual Conference of Inertial Technology.Beihai,China:Chinese Inertial Tech Acad,1999:158-161(in Chinese)
  • 期刊类型引用(8)

    1. 赵志彬,杨正伟,李胤,寇光杰,陈金树,张炜. 低速冲击下碳/玻混杂复合材料红外辐射特征. 北京航空航天大学学报. 2023(01): 177-186 . 本站查看
    2. 石姗姗,吕超雨,吕航宇,程功,孙直. 具有Kevlar短纤维界面增韧的碳纤维/铝蜂窝夹芯板冲击后压缩性能. 复合材料学报. 2023(02): 771-781 . 百度学术
    3. 刘俭辉,潘仪晨,薛文卓,孙建仁. T300/69层合板多角度冲击下的数值模拟研究. 兰州理工大学学报. 2023(03): 43-48 . 百度学术
    4. 谭理成,汪舟,王晓丽,杨莹,蒋亚琴,曾飞,段芳芳,甘进. 冲头形状对复合材料层合板低速冲击力学行为影响研究. 兵器材料科学与工程. 2023(04): 1-7 . 百度学术
    5. 夏法锋,张红哲,李洋. 基于3D打印技术制备CF-PLA纤维及性能研究. 塑料工业. 2023(08): 152-157 . 百度学术
    6. 许良,胡鸿铭,周松,宋万万. 两次冲击距离对CFRP层合板冲击损伤和剩余压缩强度的影响. 复合材料科学与工程. 2023(12): 12-18+37 . 百度学术
    7. 张梦涛,刘峰,李雪江. 碳纤维层合板低能量冲击后静强度试验研究. 新技术新工艺. 2022(01): 62-66 . 百度学术
    8. 王涛,杨勇新. 低速冲击下复合材料组合板新型耗能模式研究. 复合材料科学与工程. 2022(02): 75-81 . 百度学术

    其他类型引用(8)

  • 加载中
计量
  • 文章访问数:  2767
  • HTML全文浏览量:  269
  • PDF下载量:  802
  • 被引次数: 16
出版历程
  • 收稿日期:  2011-04-28
  • 网络出版日期:  2012-08-30

目录

    /

    返回文章
    返回
    常见问答