捻度对缝合线浸润特性的影响

刘千; 肇研; 段跃新; 罗辑

捻度对缝合线浸润特性的影响

1.
北京航空航天大学材料科学与工程学院, 北京 100191
2. 成都飞机工业有限责任, 公司, 成都 610092

详细信息

中图分类号: TB332
计量
- 文章访问数: 1662
- HTML全文浏览量: 241
- PDF下载量: 610
- 被引次数: 0
出版历程
- 收稿日期: 2011-05-04
- 网络出版日期: 2012-09-30

Effect of twist on permeability of the sewing thread

1.
School of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China
2. Chengdu Airplane Company, Chengdu 610092, China

摘要

摘要: 研究不同捻度缝合线的浸润效果,通过SEM(扫描电子显微镜)观察不同捻度缝合线浸润树脂后的尺寸及其与树脂界面结合情况.研究结果表明:随着缝合线捻度的增加,树脂浸润缝合线的效果变差,缝合线纤维束及单丝与树脂结合情况变差;浸润树脂后的缝合线纤维束尺寸相对浸润之前提高,但随着捻度的增加,浸润树脂后的缝合线纤维束尺寸降低.
- 缝合线 /
- 捻度 /
- 浸润
Abstract: An accurate assessment of the axial permeability of sewing thread with different twists was presented. Meanwhile, the dimensions of the sewing threads with different twists and their interface with resin were discussed by the scanning electron microscope technology. The experimental results show that the increasing of sutures' twist degrades the permeability along the axial direction of sewing thread and dimensions of sutures' cross-section decrease while the interface of sewing thread and resin deteriorate with increasing the twist of the sewing thread. However, the dimensions of sutures after infiltration of resin are greater than before.
- sewing thread /
- twist /
- permeability

HTML全文

参考文献(9)

[1]	Dexter H B.Development of textile reinforced composites for aircraft structures//Preaceeding of the 4th International Symposium for Textile Composites.Kyoto:Kyoto Institute of Technology,1998
[2]	沈真．复合材料结构设计手册[M]．北京:航空工业出版社,2001 Shen Zhen.Structural design manual of composites[M].Beijing:Aviation Industry Press,2001(in Chinese)
[3]	邵雪明,胡金莲.预制件中缝合纱线对渗透特性影响的研究[J].纺织学报,2003,24 (2):3 Shao Xueming,Hu Jinlian.A study of effect of stitches on the equivalent permeability of interbundle channels[J].Journal of Textile Technology,2003,24(2):3(in Chinese)
[4]	Dow M B, Dexter H B.Development of stitched,braided and woven composites structure in ACT program ．NASA TP-97-206234,1997
[5]	Mattheij P,Gliesche K,Feltin D.3D reinforced stitched carbon/epoxy laminates made by tailored fibre placement[J].Composites:Part A,2000,31(6):571-581
[6]	程小全,郦正能,赵龙．缝合复合材料制备工艺和力学性能研究[J]．力学进展,2009,39(1):89-102 Chen Xiaoquan,Li Zhengneng,Zhao Long.Fabricating process and mechanical property research of stitched composites structures[J].Advances in Mechanics,2009,39(1):89-102(in Chinese)
[7]	王春敏.三维缝合复合材料力学性能的研究进展[J]．材料导报,2010,24(15):204-206 Wang Chunmin.Research progress in the mechanical properties of 3D stitched composites[J].Materails Rereview,2010,24(15): 204-206(in Chinese)
[8]	Mouritz A P.Review of applications for advanced three-dimensional fiber textile composites[J].Composites:Part A,1999,30:1445-1461
[9]	古托夫斯基T G.先进复合材料制造技术[M].李宏运,安学峰,王克俭,等译.北京:化学工业出版社,2004:127-130,326-328 Gutowski T G.Advanced composites manufacturing[M].Translated by Li Hongyun,An Xuefeng,Wang Kejian,et al.Beijing:Chemical Industry Press,2004:127-130,326-328(in Chinese)