带口盖复合材料柱壳压缩性能

范舟; 程小全; 李钟海; 胡仁伟

带口盖复合材料柱壳压缩性能

北京航空航天大学航空科学与工程学院, 北京 100191

详细信息

中图分类号: TB 33
计量
- 文章访问数: 1465
- HTML全文浏览量: 90
- PDF下载量: 681
- 被引次数: 0
出版历程
- 收稿日期: 2011-10-14
- 网络出版日期: 2013-01-31

Compressive behavior of composite cylinder shell with cover

School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 研究了1/3弧长带有口盖复合材料柱壳的压缩行为.实验测试的带口盖柱壳结构在压缩后发生局部屈曲变形,无后屈曲现象发生,屈曲破坏载荷为118.944 kN.利用ABAQUS有限元软件建立相应有限元模型计算其屈曲破坏行为,并将计算结果与实验结果进行比较,证明所建立的模型正确有效.利用所建立的模型,探究提高结构屈曲载荷的方法.研究表明:补片与口盖的铺层角度对结构的屈曲载荷有直接影响,如果补片与口盖的铺层角度由0°变为20°后,结构屈曲载荷可以分别提高6.8%和2.4%;补片厚度也与结构屈曲载荷相关,但试图增加现有补片厚度来提高结构屈曲载荷方法并不十分理想.当补片厚度由11层提高到16层时,结构屈曲载荷也仅提高了2.37%,考虑成本与重量因素,此方法与改变铺层角度相比不可取.
- 复合材料柱面壳 /
- 口盖 /
- 压缩 /
- 屈曲分析
Abstract: The compressive behavior of one-third composite cylindrical shell with cover was studied. The composite cylinder shell with cover which was tested under compressive load failed in local buckling at 118.944 kN without post-buckling. The finite element model was built in ABAQUS to calculate buckling behavior of the composite cylindrical structure. The computational results were compared with experimental results to verify the validity of this finite element model. The built finite element model was utilized to investigate the method of improving buckling load of the structure. The results show that the layer angles of patch and cover have directly effect on the buckling load. If the angle of patch and cover change from 0皌o 20 ,the structure buckling load will improve 6.80% and 2.39%. The thickness of patch also has effect on the buckling load. However, increasing thickness of patch is not an ideal method to improve buckling load. Because when the number of the layers increases from 11 to 16, buckling load only improves by 2.37%. Considering the cost and weight, it is not a wise choice compared with changing layer angle.
- composite cylindrical shell /
- cover /
- compressive /
- buckling analysis

HTML全文

参考文献(12)

[1]	李钟海,程小全,杨琨,等.复合材料柱面壳压缩性能分析[J].复合材料学报,2011,28(1):206-210 Li Zhonghai,Cheng Xiaoquan,Yang Kun,et al.Composite properties analysis of composite cylindrical shell [J].Acta Materiae Compositae Sinica,2011,28(1) 206-210(in Chinese)
[2]	沈惠申.湿热环境中复合材料层合圆柱薄壳的屈曲和后屈曲[J].应用数学和力学,2001,22(3):228-238 Shen Huishen.Buckling and postbuckling of laminated thin cylindrical shell under hydrothermal[J].Applied Mathematical and Mechanics,2001,22(3):228-238(in Chinese)
[3]	王珂晟,刘国强,朱晓莹.含初始缺陷的加强复合材料圆柱壳的非线性屈曲分析[J].机械设计与制造,2004(6):63-65 Wang Kesheng,Liu Guoqiang,Zhu Xiaoying.Analysis on nonlinear buckling of reinforced laminated composite cylindrical shell with initial imperfection[J].Machinery Design and Manufacture,2004(6):63-65(in Chinese)
[4]	Kang J H,Kim C G.Minimum-weight design of compressively loaded composite plates and stiffened panels for postbuckling strength by genetic algorithm[J].Composite Structures,2005,69(2):239-246
[5]	李钟海,程小全,张纪奎.开口复合材料柱壳屈曲与补救有限元分析[J].应用力学学报,2011,28(2):172-176 Li Zhonghai,Cheng Xiaoquan,Zhang Jikui.Finite element analysis of buckling and salvage of a composite cylindrical shell with an open hole [J].Chinese Journal of Applied Mechanics,2011,28(2):172-176 (in Chinese)
[6]	Vaziri A.On the buckling of cracked composite cylindrical shells under axial compression [J].Composite Structures,2007,80(1):152-158
[7]	王蔓,白瑞祥,杨继新.碳纤维增强聚合物基复合材料修补空心柱体结构的屈曲分析[J].大连工业大学学报,2010,2(4):234-239 Wang Man,Bai Ruixiang,Yang Jixin.Bucking analysis of hollow cylinder structure strengthened with CFRP laminates [J].Journal of Dalian Polytechnic University,2010,2(4):234-239(in Chinese)
[8]	吴金松,薛量,束永平,等.复合材料剪切圆柱壳在轴压下的屈曲与后屈曲[J].华东船舶工业学院学报,1999,13(2):110-119 Wu Jinsong,Xue Liang,Shu Yongping,et al.Buckling and postbuckling of laminated shear-deformable clindrical shell under axial compression [J].Journal of East China Shipbuilding Institute,1999,13(2):110-119(in Chinese)
[9]	束永平,张建武,吴金松.反对称正交铺层剪切圆柱壳在外压下的屈曲和后屈曲[J].复合材料学报,1999,16(4): 121- 129 Shu Yongping,Zhang Jianwu,Wu Jinsong.Buckling and postbuckling of antisymmetrically laminated cross plyshear deformable cylindrical shell under external pressure[J].Acta Materiae Compositae Sinica,1999,16(4) :121-129(in Chinese)
[10]	王毅,罗永峰,沈惠申.各向异性复合材料圆柱薄壳轴压下的屈曲性能[J].同济大学学报,2002,30(6):673-679 Wang Yi,Luo Yongfeng,Shen Huishen.Post-buckling analysis imperfect stiffened laminated cylindrical shell under axial compression[J].Journal of Tongji University,2002,30(6):673-679(in Chinese)
[11]	赵阳,金锋.轴压作用下矩形开口圆柱壳的稳定[J].工程设计学报,2004,11(5):249-255 Zhao Yang,Jin Feng.Stability of cylindrical shell with rectangular openings subjected to axial compr-ession[J].Journal of Engineering Design,2004,11(5):249-255(in Chinese)
[12]	阎崇年,范舟,程小全,等.含开口复合材料柱面壳压缩性能[J].北京航空航天大学学报,2012,38(7):920-924 Yan Chongnian,Fan Zhou,Cheng Xiaoquan,et al.Compessive behaviour of composite cylindrical shell with open hole[J].Journal of Beijing University of Aeronautics and Astronautics,2012,38(7):920-924(in Chinese)