复合材料构件R区的超声相控阵检测实验

张冬梅; 于光; 周正干; 徐娜

复合材料构件R区的超声相控阵检测实验

1.
上海飞机制造有限公司, 上海 200436
2. 北京航空航天大学机械工程及自动化学院, 北京 100191

基金项目: 国家商用飞机制造工程技术研究中心创新基金资助项目

详细信息

中图分类号: TB553
计量
- 文章访问数: 1757
- HTML全文浏览量: 169
- PDF下载量: 782
- 被引次数: 14
出版历程
- 收稿日期: 2012-05-27
- 修回日期: 2012-11-29
- 网络出版日期: 2013-05-31

Ultrasonic phased array inspection for the corner of composite components

1.
Shanghai Aircraft Manufacturing Co. ltd, Shanghai 200436, China
2. School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 针对复合材料构件R区的超声检测问题,开展超声相控阵检测实验研究.分析R区的检测难点,利用超声相控阵检测技术的优势,分别提出了基于相控阵弧阵换能器和线阵换能器的两种检测方法;对复合材料L型试样的R区进行超声相控阵检测实验,验证了两种检测方法的正确性;并与常规超声检测方法进行对比,分析了超声相控阵技术检测R区的技术优势.研究结果表明:超声相控阵检测技术具有适用性强、检测效率高等优势,可以满足复合材料构件R区的检测要求.
- 超声相控阵 /
- 无损检测 /
- 复合材料 /
- R区
Abstract: Ultrasonic phased array inspection for the corner of composite components was researched on experiment. The difficulties of the corner inspection and advantages of ultrasonic phased array inspection technique were dealt with. Then two kinds of inspection methods with curved array transducer and linear array transducer were put forward. The experiments of the corner inspection of L-shaped composite component were conducted with the two methods, which verified the correctness of the two kinds of methods. Finally, the two inspection methods and conventional ultrasonic inspection method were contrasted and the advantages of the corner inspection using ultrasonic phased array technique were summarized. The results show that ultrasonic phased array technique is a feasible, efficient detection method, which can satisfy the inspection requirement of the corner of composite components.
- ultrasonic phased array /
- nondestructive testing /
- composite /
- corner

HTML全文

参考文献(14)

[1]	苏云洪,刘秀娟,杨永志.复合材料在航空航天中的应用[J].工程与试验,2008(4):36-38 Su Yunhong,Liu Xiujuan,Yang Yongzhi.Application of composites in aviation and aerospace[J].Testing Technology and Testing Machine,2008(4):36-38(in Chinese)
[2]	李家伟,陈积懋.无损检测手册[M].北京:机械工业出版社,2002:954-955 Li Jiawei,Chen Jimao.Nondestructive testing manual[M].Beijing:China Machine Press,2002:954-955(in Chinese)
[3]	Busse G. Nondestructive evaluation of polymer materials[J].NDT & E International,1994,27(5):253-262
[4]	Reynolds W N.Nondestructive testing (NDT) of fibre-reinforced composite materials[J].Material & Design,1984,5(6):256-270
[5]	叶宏军,翟全胜,彭志霞,等.复合材料帽形结构水溶芯模共固化成型工艺研究[J].纤维复合材料,2009(4):3-5 Ye Hongjun,Zhai Quansheng,Peng Zhixia,et al.Co-curing technology using water dispersible core for the hollw'structure composite parts[J].Fiber Composite,2009(4):3-5(in Chinese)
[6]	Nesvijski E G.Some aspects of ultrasonic testing of composites[J].Composite Structures,2000,48:151-155
[7]	Satyanarayan L,Sridhar C,Krishnamurthy C V,et al.Simulation of ultrasonic phased array technique for imaging and sizing of defects using longitudinal waves[J].International Journal of Pressure Vessels and Piping,2007,84:716-729
[8]	Wooh Shichang, Shi Yijun.Optimum beam steering of linear phased arrays[J].Wave Motion,1999,29:245-265
[9]	林莉,杨平华,张东辉,等.厚壁铸造奥氏体不锈钢管道焊缝超声相控阵检测技术概述[J].机械工程学报,2003,39(2):1-9 Lin Li,Yang Pinghua,Zhang Donghui,et al.Review of phased array ultrasonic testing for thick wall cast austenitic stainless steel pipeline welds[J].Journal of Mechanical Engineering,2003,39(2):1-9(in Chinese)
[10]	Lamarre A,Dube N,Ciorau P,et al.Feasibility study of ultrasonic inspection of turbine blade root using phased array probes[J].Insight,2000,42(9):586-589
[11]	Habermehl J,Lamarre A.Ultrasonic phased array tools for composite inspection during maintenance and manufacturing[C] //17th World Conference on Nondestructive Testing.Shanghai:[s.n.],2008:25-28
[12]	何方成,王铮,史丽军.复合材料制件拐角部位超声检测技术[J].材料工程,2011(7):80-84 He Fangcheng,Wang Zheng,Shi Lijun.Ultrasonic testing technique for the inspection of defects in the corner of composites[J].Journal of Materials Engineering,2011(7):80-84(in Chinese)
[13]	Drinkwater B W,Wilcox P D.Ultrasonic arrays for non-destructive evaluation:a review[J].NDT & E International,2006,39:525-541
[14]	Holmes C,Drinkwater B W,Wilcox P D.Post-processing of the full matrix of ultrasonic transmit-receive array data for non-destructive evaluation[J].NDT & E International,2005,38:701-711

施引文献

期刊类型引用(11)

1.	钟世英，刘文昊，凌道盛，岳茜茜. 足垫构型对着陆器软着陆稳定性影响研究. 计算机仿真. 2024(12): 81-87 . 百度学术
2.	陈含智，孙蕊，邱明，毛继志，胡浩亮，张立东. 基于自适应噪声方差的卫星定位故障检测法. 北京航空航天大学学报. 2023(02): 406-421 . 本站查看
3.	杨智杰，王刚，赵瑞杰，王春洁，赵军鹏. 火星进入舱配平翼机构展开冲击动力学分析. 北京航空航天大学学报. 2023(02): 422-429 . 本站查看
4.	Bo LEI，Ming ZHANG，Hanyu LIN，Hong NIE. Optimization design containing dimension and buffer parameters of landing legs for reusable landing vehicle. Chinese Journal of Aeronautics. 2022(03): 234-249 . 必应学术
5.	贾山，赵建华，胡汝洁，陈金宝，周向华，张胜. 可复用小型月表着陆器设计优化及仿真分析. 宇航学报. 2022(03): 356-365 . 百度学术
6.	Zongmao Ding，Hongyu Wu，Chunjie Wang，Jianzhong Ding. Hierarchical Optimization of Landing Performance for Lander with Adaptive Landing Gear. Chinese Journal of Mechanical Engineering. 2019(02): 24-35 . 必应学术
7.	关俊山，杨大鹏，张艳兵，王进军. 基于折衷规划的客车电池箱结构多工况拓扑优化. 武汉理工大学学报(交通科学与工程版). 2019(02): 363-367 . 百度学术
8.	丁宗茂，王春洁，吴宏宇，丁建中，郭璠. 探测器触地关机软着陆稳定性分析. 北京航空航天大学学报. 2018(03): 614-620 . 本站查看
9.	刘学翱，吴宏宇，王春洁，丁宗茂，丁建中. 着陆器变阻尼缓冲器性能分析及参数优化. 北京航空航天大学学报. 2018(10): 2149-2155 . 本站查看
10.	吴宏宇，王春洁，丁宗茂，丁建中，董洋，满剑锋. 着陆姿态不确定下的着陆器缓冲机构优化设计. 宇航学报. 2018(12): 1323-1331 . 百度学术
11.	吴宏宇，王春洁，丁宗茂，丁建中，刘学翱. 两种着陆模式下的着陆器缓冲机构构型优化. 宇航学报. 2017(10): 1032-1040 . 百度学术