基于灰色预测的加速试验机理一致性判定方法

潘晓茜; 康锐

基于灰色预测的加速试验机理一致性判定方法

潘晓茜¹,
康锐²

1.
中国电子科技集团电子科学研究院, 北京 100041
2. 北京航空航天大学可靠性与系统工程学院, 北京 100191

详细信息

中图分类号: TB114.3
计量
- 文章访问数: 1365
- HTML全文浏览量: 44
- PDF下载量: 568
- 被引次数: 0
出版历程
- 收稿日期: 2012-07-13
- 网络出版日期: 2013-06-30

Identification method of failure mechanism consistency for accelerated testing based on grey forecasting

Pan Xiaoxi¹,
Kang Rui²

1.
China Academy of Electronics and Information Technology, Beijing 100041, China
2. School of Reliability and Systems Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 确定失效机理一致性条件是保证加速试验正确性的前提之一.由于现有的一致性判定方法只能利用加速试验数据,不能指导加速试验设计,因此需要一种基于强化试验数据的一致性判定方法.针对工程中强化试验数据少的特点,选取可以处理少数据的灰色预测,给出了一致性判定的新方法及流程.该方法通过将灰色预测中的GM(1,1)和等维新息模型相结合,找出强化试验数据的趋势改变点,在加速试验之前得到机理一致性变化的条件.通过在加速度计中的应用案例,验证了该方法的可行性.
- 加速试验 /
- 机理一致性 /
- 强化试验 /
- 灰色预测 /
- GM(1,1) /
- 等维新息模型
Abstract: Consistency of failure mechanism identification is one of the preconditions of correctness of accelerated testing design. The existing identification methods of failure mechanism consistency are based on data from accelerated testing which can not guide the design of accelerated testing. Therefore, the method based on data from enhancement testing is needed. The method proposed was based on grey prediction for lack of data from enhancement testing in engineering. The new identification method and flow of failure mechanism was also given. According to the combination of GM(1,1) and equal dimension model, the change point of trend of data from enhancement testing was found, as well as the level of consistency of failure mechanism before the accelerated testing. Finally, the feasibility of the method was validated by a practical example on accelerometer.
- accelerated testing /
- failure mechanism consistency /
- enhancement testing /
- grey forecasting /
- GM(1,1) /
- new information and equal dimensional model

HTML全文

参考文献(15)

[1]	Pan Xiaoxi,Huang Xiaokai,Chen Yunxia,et al.Connotation of failure mechanism consistency and identification method for accelerated testing[C]//PHM-2011 Shenzhen Conference.Shenzhen: IEEE Computer Society,2011: 1-7
[2]	Hu J M,Barker D,Dasgupta A,et al.Role of failure-mechanism identification in accelerated testing[J].Institute of Environmental Sciences & Technology,1993,36(4):39-45
[3]	郭春生,谢雪松,马卫东,等.加速试验中失效机理一致性的判别方法[J].半导体学报,2006,27(3):560-563 Guo Chunsheng,Xie Xuesong,Ma Weidong,et al.A failure-mechanism identification method in accelerated testing[J].Chinese Journal of Semiconductors,2006,27(3):560-563(in Chinese)
[4]	Cui Helen.Accelerated temperature cycle test and coffin-manson model for electronic packaging[C]//Reliability and Maintainability Symposium,Proceedings Annual.Alexandria,VA,United States: Institute of Electrical and Electronics Engineers Inc,2005:556-560
[5]	张春华.步降应力加速寿命试验的理论和方法[D].长沙:国防科学技术大学研究生院,2002 Zhang Chunhua.Theory and method of step-down-stress accelerated life testing[D].Changsha: National University of Defense Technology,2002(in Chinese)
[6]	周源泉,翁朝曦,叶喜涛．论加速系数与失效机理的不变的条件(I)——寿命型随机变的情况[J]．系统工程与电子技术,1996(1):55-67 Zhou Yuanquan,Weng Zhaoxi,Ye Xitao.Study on accelerated factor and condition for constant failure mechanism(I)—the case for lifetime is a random variable[J].Systems Engineering and Electronics,1996(1):55-67(in Chinese)
[7]	周源泉,翁朝曦,叶喜涛．论加速系数与失效机理的不变的条件(II)——失效为计数过程的情况[J]．系统工程与电子技术,1996(3):68-75 Zhou Yuanquan,Weng Zhaoxi,Ye Xitao.Study on accelerated factor and condition for constant failure mechanism(II)—the case for failure follows counting process [J].Systems Engineering and Electronics,1996(3):68-75(in Chinese)
[8]	孙祝岭.失效机理不变的一个条件[J].电子产品可靠性与环境试验,2008,26(4):6-8 Sun Zhuling.A condition for constant failure mechanism[J].Electronic Product Reliability and Environmental Testing,2008,26(4):6-8(in Chinese)[9] 孙祝岭.失效机理不变的假设检验[J].电子产品可靠性与环境试验,2009,27(2):1-5 Sun Zhuling.Hypothesis testing for constant failure mechanism[J].Electronic Product Reliability and Environmental Testing,2009,27(2):1-5(in Chinese)
[9]	吴鸿兵,林震.某电容器加速贮存寿命试验设计研究[J].环境适应性和可靠性,2007(5):17-21 Wu Hongbing,Lin Zhen.Design research of certain capacitor accelerated storage life testing[J].Environmental Apartability& Reliability,2007(5):17-21(in Chinese)
[10]	朱立群,李敏伟,刘慧丛,等.高强度钢表面镀锌、镉层加速腐蚀试验研究[J].航空学报,2006,27(2):341-346 Zhu Liqun,Li Minwei,Liu Huicong,et al.Research of accelerated corrosion test of zinc,cadmium coating on high strength steel[J].Acta Aeronautica et Astronautica Sinica,2006,27(2):341-346(in Chinese)
[11]	Kim Jungwoo,Yoon Dongcheol,Jeon Minseok,et al.Degradation behaviors and failure analysis of Ni-BaTiO3 base-metal electrode multilayer ceramic capacitors under highly accelerated life test[J].Current Applied Physics,2010,10(5):1297-1301
[12]	Deng Julong.Control problems of grey systems [J].Systems & Control Letters,1982,1(5):288-294
[13]	邓聚龙.灰色系统基本方法[M].2版.武汉:华中科技大学出版社,2005:2-4 Deng Julong.The primary methods of grey system theory[M].2nd ed.Wuhan:Huazhong University of Science and Technology Press,2005:2-4(in Chinese)
[14]	刘思峰,党耀国,方志耕.灰色系统理论及其应用[M].北京:科学出版社,2004 Liu Sifeng,Dang Yaoguo,Fang Zhigeng.Theory and application of grey system theory[M].Beijing:Science Press,2004(in Chinese)
[15]	李小燕.基于灰色理论的电力负荷预测[D].武汉:华中科技大学,2007 Li Xiaoyan.Electric power load forecasting based on grey theory[D].Wuhan:Huazhong University of Science and Technology,2007(in Chinese)