复合弯扭涡轮叶片尾缝的快速建模

张宝源; 席平; 杨炯

复合弯扭涡轮叶片尾缝的快速建模

北京航空航天大学机械工程及自动化学院, 北京 100191

详细信息

中图分类号: TP391.7;V232.4
计量
- 文章访问数: 1458
- HTML全文浏览量: 214
- PDF下载量: 592
- 被引次数: 0
出版历程
- 收稿日期: 2013-03-13
- 网络出版日期: 2014-01-20

Rapid modeling of trailing edge slots in bowed-twisted turbine blade

School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 尾缝是涡轮叶片中的重要冷却结构.为解决复合弯扭叶片尾缝的精确建模问题并提高其建模效率，提出了包含尾缝工具体创建和尾缝窗口创建过程的创成式尾缝快速建模方法.首先通过叶身内外型截面线自动匹配算法、叶盆叶背曲线方位判断算法，创建具有和叶身相同或相近弯扭状况的尾缝工具体.之后借助自定义的数据结构记录各组尾缝窗口信息，创建多组不同规格的尾缝窗口，完成尾缝建模.最后使用UG Open API工具开发了尾缝快速建模程序，并通过实例验证了所提出方法的可行性.
- 计算机辅助设计 /
- 尾缝 /
- 复合弯扭涡轮叶片 /
- UG Open API
Abstract: Trailing edge slots are important cooling structures in turbine blade. In order to realize the precise modeling of these structures in bowed-twisted turbine blade and improve the modeling efficiency, a rapid generative modeling method was proposed, including the tool body creation step and the slot windows creation step. Firstly, the tool body with the same or similar bowed-twisted condition as the blade was created via the matching algorithm of inside and outside blade profiles and the direction determining algorithm of pressure and suction sides. Then the groups of slot windows with different sizes were created by employing specific data structure to store the window groups information. Finally, a rapid trailing edge slots modeling program was de-veloped based on UG Open API, and the modeling result validates the feasibility of the method.
- computer aided design /
- trailing edge slots /
- bowed-twisted turbine blade /
- UG Open API

HTML全文

参考文献(12)

[1]	倪萌, 朱惠人, 裘云, 等.航空发动机涡轮叶片冷却技术综述[J].燃气轮机技术, 2005, 18(4):25-33 Ni Meng, Zhu Huiren, Qiu Yun, et al.Review of aero-turbine blade cooling technologies[J].Gas Turbine Technology, 2005, 18(4):25-33(in Chinese)
[2]	王仲奇, 郑严.叶轮机械弯扭叶片的研究现状及发展趋势[J].中国工程科学, 2000, 2(6):40-48 Wang Zhongqi, Zheng Yan.Research status and development of the bowed-twisted blade for turbomachines[J].Engineering Science, 2000, 2(6):40-48(in Chinese)
[3]	王雷, 胡松岩.动力涡轮弯扭导向叶片的设计[J].航空发动机, 2001(4):6-10 Wang Lei, Hu Songyan. Design of the bowed-twisted guided blade in power turbine[J].Aero Engine, 2001(4):6-10(in Chinese)
[4]	宋玉旺, 席平.基于特征造型技术的涡轮叶片参数化设计[J].北京航空航天大学学报, 2004, 30(4):321-324 Song Yuwang, Xi Ping.Parametric design of turbine blade based on feature modeling[J].Journal of Beijing University of Aeronautics and Astronautics, 2004, 30(4):321-324(in Chinese)
[5]	朱谦, 宁涛, 席平.基于引导线的涡轮气冷叶片伸根建模方法[J].北京航空航天大学学报, 2012, 38(8):1085-1089 Zhu Qian, Ning Tao, Xi Ping.Root extending section of turbine blade modeling method based on guide curves[J].Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(8) :1085-1089(in Chinese)
[6]	Koini G N, Sarakinos S S, Nikolos I K.A software tool for parametric design of turbomachinery blades[J].Advances in Engineering Software, 2009, 40(1):41-51
[7]	Pérez-Arribas F, Trejo-Vargas I. Computer-aided design of horizontal axis turbine blades[J].Renewable Energy, 2012, 44: 252-260
[8]	田庆, 莫蓉, 夏禹, 等.航空发动机叶片CAD造型方法[J].航空制造技术, 2007(2):78-81 Tian Qing, Mo Rong, Xia Yu, et al.CAD modeling method for aeroengine blade[J].Aircraft Manufacturing Technology, 2007(2):78-81(in Chinese)
[9]	Martin T J.Computer-automated multi-disciplinary analysis and design optimization of internally cooled turbine blades[D].University Park:The Pennsylvania State University, 2001
[10]	虞跨海, 李立州, 岳珠峰.基于解析及特征造型的涡轮冷却叶片参数化设计[J].推进技术, 2007, 28(6):637-640 Yu Kuahai, Li Lizhou, Yue Zhufeng.Parametric design for cooling turbine blades based on analytic and feature modeling[J].Journal of Propulsion Technology, 2007, 28(6):637-640(in Chinese)
[11]	Yu K, Yue Z, Wang J.Parametric modeling and multidisciplinary design optimization of 3-D internally cooled turbine blades[R].AIAA-2007-7719, 2007
[12]	Hoschek J, Müller R.Turbine blade design by lofted B-spline surfaces[J].Journal of Computational and Applied Mathematics, 2000, 119(1/2):235-248