Burning surface calculation for grain embedded metal wires based on SolidWorks API
-
摘要: 以SolidWorks的二次开发接口为基础,用Visual Basic作为开发工具,在SolidWorks环境下通过调用内置的API函数,自动完成嵌金属丝药柱的参数化建模.程序同时通过调用API函数提取药柱实际参与的燃面面积,获得了嵌金属丝装药的燃面随肉厚的变化关系曲线,发展了一种更为简单准确的燃面计算方法,在此基础上,进行了内弹道性能的计算.计算结果跟试验结果相比表明,该计算方法准确且精度较高,跟试验结果吻合得很好,能够较好地模拟该类药型的燃烧过程,可以满足工程计算上的需要,并为同类型的复杂装药计算和设计提供了参考.Abstract: A simpler and more accurate of propellant grain calculation which is based on SolidWorks API interface and Visual Basic has been developed for grain embedded metal wires. It can build parametrical model for grain embedded metal wires automatically and distill burning surface which occurs during burning process by SolidWorks API. As a result of the relation between burning surface and propellant thick, the interior ballistic performances can be simulated. The result shows that this calculation method is feasible and has a better precision. The calculation results are in good agreement with experiment results. It can also simulate the burning process of this type grain and be satisfied with actual engineering calculation. This software is a useful tool for difficult propellant grain calculation and propellant grain design with this type grain.
-
Key words:
- solid rockets motor /
- propellant grain calculation /
- computer aided design
-
[1] 王元有.固体火箭发动机设计[M].北京:国防工业出版社,1984 Wang Yuanyou. Design of solid rocket motor[M]. Beijing: National Defence Industry Press, 1984(in Chinese) [2] Dunn S S, Coats D E. 3-D grain design and ballistic analysis using the SPP97 code . AIAA-3340,1997 [3] 董新刚,陈林泉,侯晓.基于PRO/E平台下的固发装药CAD软件 2002年中国宇航学会固体推进专业委员会年会论文集(上).昆明: ,2002:109-114 Dong Xingang, Chen Linquan, Hou Xiao. CAD for solid rocket motor grains based on PRO/E Solid Propulsion Committee Annual Tutorial of Chinese Society of Astronautics(1st). Kunming: , 2002:109-114(in Chinese) [4] 于胜春,赵汝岩,周红梅,等.基于Pro/E特征造型技术的固体发动机装药燃面计算[J].固体火箭技术,2005,28:108-111 Yu Shengchun, Zhao Ruyan, Zhou Hongmei, et al. Burning area regression simulation and calculation of solid rocket motor grains based on Pro/E feature modeling technology [J]. Journal of Solid Rocket Technology, 2005, 28:108-111(in Chinese) [5] 杨石林,富婷婷,李健,等.基于SolidWorks平台嵌金属丝药柱装药计算 中国宇航学会固体火箭推进第22届年会.成都: ,2005:62-65 Yang Shilin, Fu Tingting, Li Jian,et al. Grain calculation of grain containing metal wires based on SolidWorks API Solid Rocket Propulsion 22nd Annual Tutorial of Chinese Society of Astronautics. Chengdu: ,2005:62-65(in Chinese) -
点击查看大图
计量
- 文章访问数: 3684
- HTML全文浏览量: 250
- PDF下载量: 1189
- 被引次数: 0
下载:
