等离子涂层典型界面损伤与破坏的数值模拟

魏洪亮; 杨晓光; 齐红宇

等离子涂层典型界面损伤与破坏的数值模拟

北京航空航天大学能源与动力工程学院, 北京 100083

详细信息

作者简介:
魏洪亮(1978－),男,辽宁阜新人,博士生,buaawhl@163.com.

中图分类号: V 254.2; TB 125
计量
- 文章访问数: 4478
- HTML全文浏览量: 194
- PDF下载量: 1070
- 被引次数: 0
出版历程
- 收稿日期: 2006-10-13
- 网络出版日期: 2007-10-31

Numerical simulation of damage and fracture on typical interfaces of plasma sprayed thermal barrier coatings

School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, Beijing 100083, China

摘要

摘要: 基于界面损伤力学思想,提出了三结点界面单元的概念,和传统界面单元相比,具有能够表征任意形状界面法线方向的优点,将改进的单元通过ABAQUS的用户子程序UEL与有限元软件进行了结合.考虑等离子涂层界面粗糙度的影响,模拟了余弦形界面在热循环载荷下的损伤以及在拉伸载荷下的破坏过程.计算结果表明,界面单元结点间位移出现不连续现象,体现了裂纹的逐渐张开过程,界面损伤随热循环次数的增加而增加,其中第一个循环造成的损伤最大,波峰处是界面断裂的危险位置,法向分离起主导作用;等离子涂层粗糙界面承受法向拉伸载荷的能力较平直界面显著增加.采用改进的界面单元模拟异质材料复杂形状界面的损伤与破坏是可行的,结果是合理的.
- 界面单元 /
- 热障涂层 /
- 界面 /
- 损伤 /
- 破坏
Abstract: Based on the idea of interface damage mechanics, a new type of interface elements with three nodes was proposed. Compared with traditional interface elements, these elements have the quality of indicating the normal direction of interface with arbitrary shape. The modified model was implemented into ABAQUS by user subroutine UEL. The numerical simulation of the damage and fracture for cosine shape interface were achieved considering the rough interface of the plasma sprayed thermal barrier coatings. The calculating results show that, under thermal cycle loadings, the displacement between nodes of the interface elements is not continuous which represents the opening process of the interface crack, the damage increases with the number of thermal cycle loadings and the max damage is caused during the first cycle, the top of the interface is the critical position and the normal separation dominants, under uni-axial tension loadings, the wavy interfaces have better capability of load bearing than the linear interfaces for PS-TBC. Simulation of damage and fracture for different materials with arbitrary interface using the modified interface elements is available, and the results are reasonable.
- interface elements /
- thermal barrier coatings /
- interfaces /
- damage /
- fracture

HTML全文

参考文献(1)

[1] Gang Qian. Fracture analysis and microstructural modeling of thermal spray coatings . New York: School of Mechanical Engineering, State University of New York, USA, 1999 [2] Chaboche J L, Feyel F, Monerie Y. Interface debonding models: a viscous regularization with a limited rate dependency[J]. International Journal of Solids and Structures, 2001, 38: 3127-3160 [3] Needleman A. A continuum model for void nucleation by inclusion debonding[J]. J Appl Mech, 1987, 54: 525-531 [4] Tvergaard V. Effect of fibre debonding in a whisker-reinforced metal[J]. Mater Sci Engng A , 1990a, 125: 203-213 [5] Lemaitre J. A course on damage mechanics[M]. Berlin: Springer, 1992 [6] Chandra N, Li H, Shet C, et al. Some issues in the application of cohesive zone models for metal-ceramic interfaces[J]. International Journal of Solids and Structures, 2002, 39: 2827-2855 [7] 牛鑫瑞, 余寿文, 冯西桥. 含圆形夹杂两相材料界面变形与损伤特性的数值模拟[J]. 机械强度, 2005, 27(5): 681-686 Niu Xinrui, Yu Shouwen, Feng Xiqiao. Numerical simulation of interfacial deformation and damage for a dual-phase composite with a circular cylindrical inclusion[J]. Journal of Mechanical Strength, 2005, 27(5): 681-686(in Chinese) [8] 周储伟, 杨卫, 方岱宁. 内聚力界面单元与复合材料的界面损伤分析[J]. 力学学报, 1999, 31(3): 372-377 Zhou Chuwei, Yang Wei, Fang Daining. Cohesive interface element and interfacial damage analysis of composites[J]. Acta Mechanica Sinica, 1999, 31(3): 372-377 (in Chinese) [9] Chaboche J L, Girard R, Levasseur P. On the interface debonding models[J]. International Journal of Damage Mechanics, 1997b, 6: 220-257 [10] Xie Wangang, Walker K P, Jordan E H, et al. Implementation of a viscoplastic model for a plasma sprayed ceramic thermal barrier coating[J]. J Eng Mater Technol, 2003, 125: 200-207 [11] 耿瑞. 热障涂层强度分析及寿命预测研究 . 北京: 北京航空航天大学能源与动力工程学院, 2001 Geng Rui. Strength analysis and life prediction study on thermal barrier coatings . Beijing : School of Jet Propulsion, Beijing University of Aeronautics and Astronautics, 2001 ( in Chinese) [12] Evans A G, Mumm D R, Hutchinson J W, et al. Mechanisms controlling the durability of thermal barrier coatings[J]. Progress in Materials Science, 2001, 46: 505-553 [13] Caliez M, Chaboche J L, Feyel F, et al. Numerical simulation of EBPVD thermal barrier coatings spallation[J]. Acta Materialia, 2003, 51: 1133-1141

施引文献

资源附件(0)

访问统计