Numerical analysis on the flow and heat transfer in a rectangular passage with sub-scale fins
-
摘要: 对装有不同结构亚尺度肋片矩形通道的流动和换热进行了数值模拟,获得了通道流场、温度场分布以及平均努塞尔数的基本特征,对各种肋片通道的换热特性进行了对比分析.计算结果表明:亚尺度肋片距主肋片根部越近越有利于散热;在远离热面区域,亚尺度肋片的比表面积越大传热效果越好.当扩展表面积相同时,亚尺度肋片的长宽比越大换热效果越好;计算结果及分析揭示了控制肋片最优几何形状的统一原则——广义温度梯度均匀化原则,并依照此原则确定了可以强化换热的较优的肋片结构.计算分析表明广义温度梯度均匀化原则可以控制对流换热过程的传热强化.Abstract: Numeration analysis was made to simulate the flow and heat transfer in a rectangular passage with different configuration of sub-scale fins,the velocity fields, temperature fields and the average Nu were obtained, the enhancements of heat transfer were compared. The calculated results show that: the lower the sub-scale fin fixed on the main fin, the more heat emanated from the hot surface transfers to the fluid; in the region far from the hot surface, the higher specific surface area of the sub-scale fins, the better enhancement of heat transfer, with the same patulous area, the bigger fin length-to-width ratio, the better effect of heat transfer; numerical simulation result and analysis reveals the universal principle that the generalized temperature gradient uniformity principle, which can controls the best configuration of sub-scale fin. The better configuration of sub-scale fin which can enhance heat transfer has been conformed. Analyze shows that generalized temperature gradient uniformity principle can control the enhancement of heat transfer in the convective heat transfer process.
-
[1] 王耀庭.电子元件热分析应用研究 .西安:西北工业大学,动力与能源学院,2004 Wang Yaoting. The application research for thermal analysis of electronic element .Xi’an: School of Propulsion, Jet Northwestern Polytechnical University, 2004(in Chinese) [2] 张兆光.电子设备冷却设计手册[M].北京:电子工业部第十四研究所,1983:149-162 Zhang Zhaoguang. The cooling of electronic equipment design handbook[M]. Beijing:The Fourteen Graduate School of Electronic Intrustry Department, 1983:149-162(in Chinese) [3] Culham J R, Muzychkav Y S. Optimization of plate fin heat sinks using entropy generation minimization Thermal Phenomena in Electronic Systems Proceedings of the Intersociety Conference, 2000: 8-15 [4] Seri Lee. Optimum design and selection of heat Sinks[J].IEEE Transactions on Components, Packaging, and Manufacturing Technology-Part A, 1995,18(4):67-70 [5] Maveety J G, Jung H H. Design of an optimal pin-fin heat sink with air impingement cooling [J]. Heat Mass Transfer, 2000, 27(2):229-240 [6] Ghai M L, Jakob M. Local coefficients of heat transfer on fins[J].Heat Mass Transfer,1950, 18:50-55 [7] Ghai M L. Heat transfer in straight fins Proceedings of Deneral Discussion on Heat Transfer. London: Institution of Mechanical Engineers, 1951:203-204 [8] Guo Z Y. Mechanism and control of convective heat transfer-coordination of velocity and heat flow fields[J]. Chinese Science Bulletin, 2001, 46(7): 596-599 [9] 夏再忠.导热和对流换热过程的强化与优化 .北京: 清华大学工程力学系, 2001 Xia Zaizhong. Augmentation and optimization on heat conduction and convection processes . Beijing: Department of Engineering Mechanics, Tsinghua University, 2001 (in Chinese) -
点击查看大图
计量
- 文章访问数: 4015
- HTML全文浏览量: 51
- PDF下载量: 1258
- 被引次数: 0
下载:
