Development of optoelectronic planar position system used to measuring position and attitude of the large construction
-
摘要: 分析了现有的顶桥施工中位姿测量系统的特点,指出其目前存在的主要问题.针对这些问题和现场需求,设计了顶桥施工中用于测量物体在二维平面上的坐标的光电测量系统,由光源、光电接收靶和数据采集系统组成.对光电接收靶的元件布局采用遗传算法进行了优化.完成了上位机接收软件的开发.优化后的光电接收靶主要有两大优势,其一是采用了外疏内密的布局,更适合控制系统使用;其二是光电接收靶的接口电路从144套减少到10套左右.整机测试结果表明,系统的测量范围在200mm×100mm左右,位置分辨率为5mm,测量周期为20ms,能够在线测量,能够替代国外相同功能的产品,适合应用于路桥施工中的自动控制.Abstract: The characteristics of now used push-bridge construction system were analyzed, and the main disadvantages of the construction system were pointed out. Aimed at those problems, a new planar position system was developed, which was composed of laser beam, photoelectric target and MCU based data acquisition system. The layout of the optoelectronic components on the optoelectronic target was optimized by the genetic algorithm. In order to test the system, a set of serial communication software was developed. There are two achievements of the optimizing. The first is that the dense in the central and sparse in the edge layout on the target is fit for control system, and the second is that the interface circuits were reduced from 144 sets to nearly 10 sets. The test result of the whole system shows that the measure range is about 200mm×100mm, the position precision is 5mm, ant the sampling time is 20ms. It can real-timely measure an object on-line which moves on a plane, and the system is adopted to be applied to the automatic control in construction projects.
-
Key words:
- photoelectric devices /
- position measurement /
- data acquisition /
- microcontrollers
-
[1] 胡助理,安文源,李玲,等.基于单片机技术的光电检测研究[J].现代电子技术, 2004, 180(13):39-41 Hu Zhuli, An Wenyuan, Li Ling, et al. Research of electro-optic examination based on technology of monolithic computer [J]. Modern Electronic Technique, 2004, 180(13):39-41(in Chinese) [2] 解生冕,钟日锋,叶廷东. 单片机控制激光平面探测电路设计[J]. 光学与光电技术, 2004,2(4):40-43 Xie Shengmian, Zhong Rifeng, Ye Tingdong. A circuit for laser plane detection controlled by singlechip computer[J]. Optics & Optoelectronics Technology, 2004, 2(4):40-43(in Chinese) [3] Anon. New generation laser alignment device launched[J]. Diesel & Gas Turbine Worldwide, 1995,27(1):71-72 [4] Tang Wenyan, Gu Yuanxian. Advances of genetic algorithms in structural optimization[J]. Advances in Mechanics, 2002, 32(1):29-40 [5] Song Limin, Jia Xiaoping, Han Fangyu. Genetic algorithm applied to multi-objective optimization:a comparative study[J]. Computers and Applied Chemistry, 2005, 22(11):1079-1082 期刊类型引用(8)
1. 赵志彬，杨正伟，李胤，寇光杰，陈金树，张炜. 低速冲击下碳/玻混杂复合材料红外辐射特征. 北京航空航天大学学报. 2023(01): 177-186 . 
本站查看2. 石姗姗，吕超雨，吕航宇，程功，孙直. 具有Kevlar短纤维界面增韧的碳纤维/铝蜂窝夹芯板冲击后压缩性能. 复合材料学报. 2023(02): 771-781 . 
百度学术3. 刘俭辉，潘仪晨，薛文卓，孙建仁. T300/69层合板多角度冲击下的数值模拟研究. 兰州理工大学学报. 2023(03): 43-48 . 百度学术4. 谭理成，汪舟，王晓丽，杨莹，蒋亚琴，曾飞，段芳芳，甘进. 冲头形状对复合材料层合板低速冲击力学行为影响研究. 兵器材料科学与工程. 2023(04): 1-7 . 百度学术5. 夏法锋，张红哲，李洋. 基于3D打印技术制备CF-PLA纤维及性能研究. 塑料工业. 2023(08): 152-157 . 百度学术6. 许良，胡鸿铭，周松，宋万万. 两次冲击距离对CFRP层合板冲击损伤和剩余压缩强度的影响. 复合材料科学与工程. 2023(12): 12-18+37 . 百度学术7. 张梦涛，刘峰，李雪江. 碳纤维层合板低能量冲击后静强度试验研究. 新技术新工艺. 2022(01): 62-66 . 百度学术8. 王涛，杨勇新. 低速冲击下复合材料组合板新型耗能模式研究. 复合材料科学与工程. 2022(02): 75-81 . 百度学术其他类型引用(8)
-
百度学术
点击查看大图
计量
- 文章访问数: 2839
- HTML全文浏览量: 189
- PDF下载量: 765
- 被引次数: 16
下载:
