Finite volume method in thermal analysis of avionics
-
摘要: 阐述了热对系统可靠性的影响,对比了数值法求解温度场分布的优缺点.针对航空电子设备热分析中同时要求满足高的分析精度和快的计算速度的问题,提出用有限体积法求解温度场分布的计算方法.根据典型航空电子设备的结构特点,建立了温度场的数学模型,给出了边界条件.在此基础上,用有限体积法对待求解方程离散化,给出了离散化过程中网格划分及边界的处理方法.结合实例进行了温度场求解,计算结果与热测量结果进行了对比,得到了较高的分析精度,验证了方法的有效性.最后对计算误差进行了分析,并提出了进一步热设计的合理化建议.Abstract: The influence of heat to the system reliability was introduced. The merits and drawback of numerical methods in solving temperature distribution were compared. In order to solve the problem of avionics of high reliability which requires highly precise result and rapidly computational velocity in thermal analysis, a computed approach of the finite volume method (FVM) to solve the temperature distribution was devoloped. The mathematical model of temperature distribution was built based on typical avionics and its boundary condition was given. Then the control equation was discretized by means of the FVM. The mesh division, the process of discretization and the disposal of boundary were included. The temperature distribution was calculated with an example. The comparison between the result of calculation and the result of measurement demonstrates a high precision of thermal analysis. The validity of this method was verified. The reason of calculated error was indicated and a reasonable proposal about further thermal design based on the result was offered in the end.
-
Key words:
- reliability /
- avionics /
- thermal analysis /
- finite volume method /
- temperature distribution
-
[1] Qing Fang, Tsuchiya T. Finite difference, finite element and finite volume methods applied to two-point boundary value problems[J].Journal of Computational and Applied Mathematics,2002,139:9-19 [2] Feistauer M. Felcman J, Lukacova-Medvidova M. On the convergence of a combined finite volume-finite element method for nonlinear convection-diffusion problems[J]. Numerical Methods for PDEs, 1997,13(2):163-190 [3] Cordero E,De Biase L,Pennati V.A new finite volume method for the solution of convection-diffusion equations:analysis for stability and convergence[J].Comm Numer Methods Engng, 1997, 13(12):923-940 [4] 杨世铭,陶文铨.传热学[M].北京:高等教育出版社, 2002:134-143 Yang Shiming, Tao Wenshuan. Heat transfer[M]. Beijing:Higher Education Press, 2002:134-143(in Chinese) [5] 李万平.计算液体力学[M].武汉:华中科技大学出版社,2004:101-149 Li Wanpin, Computational fluid dynamics [M]. Wuhan:Huazhong University of Science and Technology Press, 2004:101-149(in Chinese) [6] Nie J H, Li Z Y, Wang Q W, et al. A method for viscous incompressible flows with a simplified collocated grid system Chen P, Chen K F. Proceeding of the Energy Engineering in 21th Century, New York:Begell House, 2000:177-183 [7] Douglas Craig C. Multigrid methods in science and engineering[J]. IEEE Computational Science & Engineering,1996,3(4):55-68 [8] 余建祖. 电子设备热设计及分析技术[M].北京:北京航空航天大学出版社, 2000:46-55 Yu Jianzu. Technique of thermal design and analysis on electronic equipments . Beijing:Beijing University of Aeronautics and Astronautics Press, 2000:46-55(in Chinese) -
点击查看大图
计量
- 文章访问数: 3072
- HTML全文浏览量: 158
- PDF下载量: 677
- 被引次数: 0
下载:
