Temperature field analysis for heterogeneous material piston
-
摘要: 功能梯度材料零件具有单质材料零件无法比拟的理化性能优势,然而由于材料分布复杂以及对功能梯度材料本身性能研究不充分,功能梯度材料零件性能分析存在很多困难.以陶瓷纤维梯度增强活塞、陶瓷纤维非梯度增强活塞为例,应用复合材料热性能理论,采用有限元分析软件ADINA中的ADINA-T模块和结构分析模块对功能梯度材料活塞和普通活塞的温度场和热流场进行了计算分析,结果表明使用陶瓷纤维梯度层可以明显改变活塞温度分布,降低散热量,缓和由于热膨胀系数不匹配,在陶瓷纤维增强层与活塞本体交界处产生的应力.Abstract: Physical and chemical performance of heterogeneous material part exceeds homogeneous material part. Because of material distributing complexity and insufficient study for heterogeneous material, there are lots of difficult in analysis of heterogeneous material part. Theory of composite performance and ADINA-T module of finite element analysis software ADINA were used to compute and analyze temperature field and heat dissipating capacity for heterogeneous material and common piston, using the gradient aluminum matrix composite piston reinforced by ceramic fibers and aluminum matrix composite piston reinforced by ceramic fibers (no grads) as examples. The results show this method can change piston temperature distribution, reduce heat dissipation capacity and relax the stress at interface of gradient aluminum matrix composite layer reinforced by ceramic fibers and piston noumenon which caused by mismatch between different coefficients of thermal expansion, using gradient aluminum matrix composite layer reinforced by ceramic fibers.
-
Key words:
- finite element /
- heterogeneous material piston /
- temperature field
-
[1] 李 永,宋 健,张志民．功能梯度材料在绿色内燃机上的应用研究[J].公路交通科技,2003,20(4):118~122 Li Yong, Song Jian, Zhang Zhimin. Theory investigate of functionally gradient material on application to green internal combustion engines[J]. Journal of Highway and Transportation Research and Development, 2003,20(4):118~122(in Chinese) [2] 曾竟成,罗 青,唐羽章．复合材料理化性能[M]．长沙:国防科技大学出版社,1998 Zeng Jingcheng, Luo Qing, Tang Yuzhang. The characteristics of the composite material’s physical & chemistry[M]. Changsha:National University of Defense Technology Press,1998(in Chinese) [3] 朱秀荣,童文俊,费良军,等．陶瓷纤维增强梯度铝基复合材料研究[J]．宇航材料工艺,2000,30(3):42~44 Zhu Xiurong, Tong Wenjun, Fei Liangjun, et al. A study on gradient aluminum matrix composite reinforced by ceramic fibers[J]. Aeropace Materials & Technology,2000,30(3):42~44(in Chinese) [4] Bhashyam S, Shin K H, Dutta D. An integrated CAD system for design of heterogeneous objects[J]. Rapid Prototyping Journal, 2000,6(2):119~135 [5] 刘达利,齐丕骧．新型铝活塞[M]．北京:国防工业出版社,1999 Liu Dali, Qi Peixiang. A new-style aluminum piston[M]. Beijing:National Defence Industry Press, 1999(in Chinese) -
点击查看大图
计量
- 文章访问数: 2941
- HTML全文浏览量: 80
- PDF下载量: 820
- 被引次数: 0
下载:
