Sum-Difference Unified Design of Monopulse Ring-Focus Antenna
-
摘要: 分析了单脉冲环焦天线差通道性能较差的原因,推荐了适用的和差口径分布函数,得出了所需馈源差方向图计算式, 提出了和差性能一体化设计步骤.为了验证理论方法的正确性,以3.5m变极化赋形单脉冲环焦天线为例,用本文提出的方法修改设计,使"和差矛盾"由6.5dB减为4.2dB,差方向图分离角由1.9°降为1.4°.因此, 使用特殊设计的单脉冲馈源可望将归一化差斜率提高到1.4.Abstract: The relatively poor performance of difference channel of a monopulse ring-focus antenna is accounted for, suitable aperture distribution functions are recommended, formulae of feed difference pattern needed are presented and sum-difference unified design method is put forward. To testify the theoretical method, the authors take a 3.5m C-band monopulse shaped ring-focus antenna with dual-polarization as an example. By using the presented method, the gain difference between the sum channel and the different channel is reduced from 6.5dB to 4.2dB , and the separation angle of the apexes of the different pattern of the antenna from 1.9° to 1.4°. Therefore, the normalized slope of difference pattern arrives at 1.4 with a particular monopulse feed.
-
[1] 程 臻,吕善伟,姜新发. 变极化单脉冲环焦天线分析与实验 .电子学报,2000,28(9):31~33. [2] Duan D W. A generalized diffraction synthesis technique for high performance reflector antennas[J]. IEEE Trans AP, 1995,43(1):27~40. [3] 谢处方,邱文杰. 天线原理与设计[M].西安:西北电讯工程学院出版社,1985. [4] 熊继衮. 防空导弹制导雷达天馈系统与微波器件[M]. 北京:宇航出版社,1994. [5] Bayliss E T. Design of monopulse antenna difference patterns with low sidelobes[J]. The Bell System Tech J,1968(3):623~650. [6] 杨可忠,杨智友,章日荣. 现代天线新技术[M]. 北京:人民邮电出版社,1993. -
点击查看大图
计量
- 文章访问数: 2662
- HTML全文浏览量: 201
- PDF下载量: 1785
- 被引次数: 0
下载:
