Method for Calculating the Dynamic Path Error of NC Machine Tools Based on MATLAB
-
摘要: 对数控铣床加工过程中的动态轨迹误差进行了研究,介绍其产生原因和基于MATLAB的仿真计算方法,并给出了2坐标和4坐标典型运动轨迹在不同进给速度下的动态轨迹误差的仿真建模和计算实例.仿真结果表明,高速铣削加工中的动态轨迹误差所引起的工件轮廓误差是不可忽略的误差因素.Abstract: The sources of dynamic path error of NC machine tools during milling process are analyzed, a simulating method based on MATLAB is introduced. The simulating modules and calculating methods of some typical 2-axises and 4-axises tracks at different feed speeds are also described. The simulating results show that, during high speed milling process, the dynamic path error of NC machine tools cannot be neglected.
-
Key words:
- numerically controlled machine /
- high-speed cutting /
- simulation /
- path error /
- MATLAB
-
[1] Huan Ji. Bahnregelung zur Bahnerzeugung an numerisch gesteuerten Werkzeugmaschinen[M]. New York:Springer-Verlag Berlin Heidelberg, 1982 [2] Pritschow G, Huan Ji. Methode zur Robotersimulation unter Beruecksichtigung der schwingungsfaehigen Mechanik und lagegeregelten Antriebe[J]. Robotersysteme, 1989,5:69~76 [3] 李清新.伺服系统与机床电气控制[M].北京:机械工业出版社,1994 Li Qingxin. Servo system and electric control of machine tools[M]. Beijing:China Machine Press, 1994 (in Chinese) [4] 何克忠,李 伟.计算机控制系统[M].北京:清华大学出版社,1998 He Kezhong, Li Wei. Computer control system[M]. Beijing:Tsinghua University Press, 1998 (in Chinese) -
点击查看大图
计量
- 文章访问数: 3219
- HTML全文浏览量: 188
- PDF下载量: 1955
- 被引次数: 0
下载:
