S-Band MMIC Amplifier Design Using HEMT
-
摘要: 介绍了S波段单级单片微波集成放大器的设计方法,电路核心为高电子迁移率晶体管(High Electron Mobility Transistor, HEMT).针对在该波段高电子迁移率晶体管稳定性较差、噪声性能优秀的特点设计电路拓扑,在HEMT的输入端并联一个200Ω电阻,用HP-EESOF公司的Libra2.1软件进行了小信号电路仿真与设计.仿真结果表明设计的放大器是绝对稳定的,在2~3GHz频带内增益为14.2dB,纹波小于0.4dB,噪声系数约2.7dB,满足实用要求.Abstract: The design procedure of S-Band microwave monolithic integrated circuits (MMIC's) amplifier using high electron mobility transistors (HEMT's) is proposed. The topology of the circuit designed is taken into account in order to guarantee the stability. A 200Ω resistance is parallel with the drain port of HEMT. It lowers the gain and enlarges the noise of amplifier but ensures that the amplifier is absolutely stable. Simulation results by Libra2.1 show that the gain in 2~3GHz is 14.2dB, gain ripple is smaller than 0.4dB and the noise figure is 2.7dB. These parameters satisfy the practical requirement.
-
[1] 陈夏生.MMIC-单片式微波集成电路[J]. 集成电路应用,1998(5):46~47. [2]高葆新. 微波集成电路[M].北京:国防工业出版社,1995. [3]王军贤. Ka频段低噪声放大器的设计[J]. 固体电子学研究与进展,1998(8):280~284. -
点击查看大图
计量
- 文章访问数: 2391
- HTML全文浏览量: 46
- PDF下载量: 1120
- 被引次数: 0
下载:
