Efficiency analysis and thermal-hydraulic modeling of aerial piston pump at whole work condition
-
摘要: 针对航空柱塞泵全工况热力学建模问题,在泵功率损失分析和传热分析的基础上建立了柱塞泵的热力学模型.考虑负载压力、输入转速、斜盘倾角和油液粘度影响,得到了泵功率损失模型.对泵传热进行了详细分析,采用控制体温度变化方程建立了描述泵各部分温度变化的热力学模型.对包含柱塞泵的简单液压系统采用Dymola进行了仿真计算,得到了不同输入转速和负载压力下泵效率及功率损失,分析比较了不同输入转速和供油流量下泵各部分温升情况.结果表明:泵效率及功率损失受输入转速和负载压力影响,在不同输入转速和供油流量下泵表现出不同的温升特性.Abstract: Thermal-hydraulic model of aerial piston pump was established based on analysis of power loss and heat transfer. Power loss model of pump was obtained, considering the influence of load pressure, input rotational speed, swash plate angel and oil viscosity. With the analysis of heat transfer in pump, the thermal-hydraulic model of pump was established to display the temperature change in all parts of the pump, which takes advantage of formula of temperature change in control volume. A hydraulic system, consisting of piston pump was simulated with Dymola to show efficiency and power loss of pump at different input rotational speed and load pressure. Temperature rising in different parts of pump at different input rotational speed and supply flow was analyzed.The result shows that the input rotational speed and load pressure impact the efficiency and power loss of pump, and temperature rising in pump presents differently in characteristics at different input rotational speed and supply flow.
-
Key words:
- piston pump /
- efficiency /
- heat transfer /
- modeling
-
[1] 李运华,王占林.机载智能泵源系统的开发研制[J].北京航空航天大学学报,2004,30(6):493-497 Li Yunhua,Wang Zhanlin.Development of airborne intelligent power supply system[J].Journal of Beijing University of Aeronautics and Astronautics,2004,30(6):493-497(in Chinese) [2] Neveu C D.Influence of viscosity on the rate of temperaure increase of hydraulic fluids //Proceedings of the 50th National Conference on Fluid Power.Las Veges:Country of Publication USA,2005:507-518 [3] 李永林.液压系统热力学模块化建模与仿真 .西安:空军工程大学工程学院,2008 Li Yonglin.Thermal-hydraulic modularized modeling and simulation of hydraulic system .Xi-an: Engineering College,Air Force Engineering University,2008(in Chinese) [4] Li Chenggong,Jiao Zongxia.Thermal-hydraulic modeling and simulation of piston pump[J].Chinese Journal of Aeronautics,2006,19(4):354-358 [5] 曹玉璋.传热学[M].北京:北京航空航天大学出版社,2001: 110-111 Cao Yuzhang.Heat transfer[M].Beijing:Beijing University of Aeronautics and Astronautics Press,2001: 110-111 (in Chinese) [6] Yunus A Cengel.传热学[M].2版.北京:高等教育出版社,2007:316-317 Yunus A Cengel.Heat transfer[M].2nd ed.Beijing:Higher Education Press,2007:316-317(in Chinese) -
点击查看大图
计量
- 文章访问数: 2838
- HTML全文浏览量: 130
- PDF下载量: 1539
- 被引次数: 0
下载:
