Pose error analysis of robot in three dimension
-
摘要: 采用了五参数模型作为机器人的运动学模型,根据相邻构件间的误差传递关系,应用位姿建模矩阵法建立了机器人的位姿误差模型,并编制了基于C++的位姿误差分析软件.利用所编制的误差分析软件,针对一6-DOF空间摄像机器人具体实例,计算分析了参数变化对机器人的末端位姿误差的影响规律,并绘制了该机器人的等误差曲线图.通过所建立的五参数误差模型和分析软件,可以直观地了解机器人机构的误差分布情况,便于合理地使用机器人或进行机器人机构误差的校正.研究结果为机器人的误差补偿提供了依据.Abstract: In terms of 5 parameters model as the kinematics model of robots, according to the transferring relationship of errors between the adjacent linkages, with the position and orientation modeling matrix method, the position and orientation error model of robot in three dimension was built, and the position and orientation error analysis program (software) based on C++ was developed. Upon a 6-DOF (degree of freedom) space photographic robot, the influence rule of the end-effector error of the robot caused by the parameter changes was simulated using this error analysis program, and an equivalence error curve picture of the robot was generated and discussed. Through the 5 parameters error model and the analysis software, the error distribution of the robot- s structure is obvious, convenient for the rational usage of robots or emendation for robots- structural errors. The research result provides a basic reference for the error compensation of robots.
-
Key words:
- robot /
- error analysis /
- kinematic analysis /
- 5 parameters model
-
[1] 焦国太,冯永和,王锋,等. 多因素影响下的机器人综合位姿误差分析方法[J]. 应用基础与工程科学学报,2004,12(4):435-442 Jiao Guotai, Feng Yonghe, Wang Feng,et al. Synthetically analysis of the robot pose error resulting from various factors[J]. Journal of Basic Science and Engineering, 2004,12(4):435-442(in Chinese) [2] Mavroidis C, Dubowsky S, Drouet P. A systematic error analysis of robotic manipulators: application to a high performance medical robot Proceedings of the 1997 IEEE International Conference on Robotics and Automation. Piscataway, NJ: IEEE,1997,2:980-985 [3] Yang Tian, Zhang Jianxun, Wang Shumei, et al. Motion planning and error analysis in robot assistant micro-surgery system Proceedings of the 6th World Congress on Intelligent Control and Automation. Piscataway,NJ: IEEE,2006,2: 8819-8823 [4] Chen J, Chao L M. Positioning error analysis for robot manipulators with all rotary joints[J]. IEEE Journal of Robotics and Automation,1987,3(6):539-545 [5] Kumar A. Positioning accuracy of manipulators with encoder equipped joints Proceedings of Symposium on Robotics Research and Advanced Application ASME. New York:ASME,1982:765-771 [6] Sugimoto K, Okada T. Compensation of positioning errors caused by geometric deviations in robot system Proceedings of 2nd International Symposium Robotics Research.Cambridge:MIT Press,1985:231-236 -
点击查看大图
计量
- 文章访问数: 4393
- HTML全文浏览量: 84
- PDF下载量: 2630
- 被引次数: 0
下载:
