复合材料板件热分层分析及试验验证

冉治国; 燕瑛; 李剑峰; 从强; 陈海峰; 匡乃航

doi:10.13700/j.bh.1001-5965.2013.0485

复合材料板件热分层分析及试验验证

doi: 10.13700/j.bh.1001-5965.2013.0485

1. 北京航空航天大学航空科学与工程学院, 北京 100191;
2. 中国空间技术研究院机械工程技术研究室, 北京 100194;
3. 哈尔滨玻璃钢研究院, 哈尔滨 150036

详细信息

作者简介:
冉治国（1985- ），男，重庆人，博士生，mfdickl1@163.com.

中图分类号: TB332
计量
- 文章访问数: 1460
- HTML全文浏览量: 169
- PDF下载量: 671
- 被引次数: 0
出版历程
- 收稿日期: 2013-09-17
- 网络出版日期: 2014-06-20

Thermal stress induced composite laminate delamination analysis and experiment verification

1. School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China;
2. Lab of Mechanical Engineering, China Academy of Space Technology, Beijing 100194, China;
3. Harbin FRP Institute, Harbin 150036, China

摘要

摘要: 针对飞行器用复合材料层合板件的热应力分层问题，进行了试验与数值模拟方面的研究.采用双线性内聚力单元用于模拟层合复合材料的分层现象；通过二次交互应力准则判断复合材料刚度降阶的起始点；并同时使用幂指数准则作为材料在混合破坏模式下的失效准则.数值模型中单层复合材料的力学性能和热膨胀性能分别由在高温（70℃）、室温（23℃）、低温（-50℃）环境下的相应测试进行确定.各复合材料层合试验件在仪器DIL-402C中经历了相同的温度变化过程，最大温差相差120℃.试验后发现，对于给定铺层的试验件，其两端中间层发生了层间分层.将数值模拟的结果与试验结果进行对比，对比结果表明数值分析与试验结果吻合良好，由此也可证明此分析方法的可行性与正确性.
- 复合材料 /
- 内聚力单元 /
- 热应力分层 /
- 幂指数准则 /
- 混合破坏模式
Abstract: To solve thermal stress induced delamination in composite laminates that used in flying vehicles, experimental tests and numerical analysis were carried out. Bilinear controlled cohesive elements were adopted to simulate the delamination in laminates, quadratic failure criterion was used to predict the initiation of stiffness softening process, and power law criterion was applied to determine the delamination propagation under mix-mode fractures. The mechanical and thermal expansion properties of lamina applied in those numerical models were tested at high temperature (70℃), room temperature (23℃) and low temperature (-50℃) respectively. The delamination experiments were carried out by use of apparatus DIL-402C. Each composite laminate experienced a same temperature changes, and the maximum temperature difference was 120℃. After experiments, the laminates in given plies were found that delamination appeared in their mid-ply in both ends. Comparisons were made between experimental results and numerical analysis. Compared results show that the predicted delamination zone was well according with the experimental results, which would certify the rightness and reliability of this analysis method.
- composite /
- cohesive element /
- thermal delamination /
- power law criterion /
- mix-mode fracture

HTML全文

参考文献(15)

[1]	曾学军,彭治雨, 石义雷,等.复杂外形跨大气层飞行器模型气动热试验研究[J].实验液体力学,2007,21(4):45-48 Zeng Xuejun,Peng Zhiyu,Shi Yilei,et al.Study of aero-heating characteristics for trans-atimospheric vehicle[J].Journal of Experiments in Fluid Mechanics,2007,21(4):45-48(in Chinese)
[2]	周云旗, 滕春明,叶彬,等.飞行过程中座舱盖透明件温度计算分析[J].洪都科技,2008(4):6-10 Zhou Yunqi,Teng Chunming,Ye Bin,et al.Calculation and analysis of temperature for transparency of aircraft canopy during flight[J].Hongdu Aviation Industry Group,2008(4):6-10(in Chinese)
[3]	Rathinasabapathy M. The application of VCCT for ABAQUS to prediction and simulation of delamination growth in composite structures[R].Aero Tech Congress & Exhibition-01-3314,2005
[4]	Bianchi F, Zhang X.A cohesive zone model for predicting delamination suppression in z-pinned laminates[J].Composites Science and Technology,2011,71(16):1898-1907
[5]	Turon A, Camanho P P,Costa J.A damage model for the simulation of delamination in advanced composites under variable-mode loading[J].Mechanics of Materials,2006,38(11):1072-1089
[6]	Morin D, Bourel B,Okabe T.A new cohesive element for structural bonding modeling under dynamic loading[J].International Journal of Impact Engineering,2013,53:94-105
[7]	Hu N, Zemba Y,Okabe T,et al.A new cohesive model for simulating delamination propagation[J].Mechanics of Materials,2008,40(11):920-935
[8]	Suemasu H, Sasaki W,Ishikawa T,et al.A numerical study on compressive behavior of composite plates with multiple circular delaminations considering delamination propagation[J].Composites Science and Technology,2008,68(12):2562-2567
[9]	Unger W J. A method to predict the effect of thermal residual stress on the free-edge delamination behavior of fiber reinforced composite laminates[J].Composites Materials,1998,32(5):431-459
[10]	张剑,李思简. 复合材料大层数层合板热变形热应力有限元分析[J].固体力学学报,1997,18(4):359-364 Zhang Jian,Li Sijian.Thermal stress of composite laminated structure with a large number of layers[J].Acta Mechanica Solid Sinica,1997,18(4):359-364(in Chinese)
[11]	冯跃中,何录武. 复合材料层合板的热应力分析[J].兰州大学学报:自然科学版,2005,41(6):94-99 Feng Yuezhong,He Luwu.Thermal stress analysis for laminated composite plates[J].Journal of Lanzhou University:Natural Science,2005,41(6):94-99(in Chinese)
[12]	杨小辉,胡坤镜, 赵宁,等.内聚力界面单元在胶接接头分层仿真中的应用[J].计算机仿真,2010,27(10):317-320 Yang Xiaohui,Hu Kunjing,Zhao Ning,et al.The simulation of the process of lamina damage in the adhesive bonded joint using the cohesive interface element[J].Computer Simulation,2010,27(10):317-320(in Chinese)
[13]	Turon A, Davila C,Camanho P P,et al.An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models[J].Engineering Fracture Mechanics,2007,74(10):1665-1682
[14]	Yang Q D, Cox B.Cohesive models for damage evolution in laminated composites[J].International Journal of Fracture,2005,133(2):107-137
[15]	王强, 刘玲.MWCNTs对碳纤维非袂皱无纺布/环氧层合板力学性能的影响[J].复合材料学报,2012,29(3):16-22 Wang Qiang,Liu Ling.Effect of MWCNTs on mechanical properties of carbon fiber non-crimp fabric/epoxy laminates [J].Acta Materiae Compsitae Sinica,2012,29(3):16-22(in Chinese)