计及壁面传热的微型向心涡轮气动设计探讨

丁超; 边磊; 邹正平

doi:10.13700/j.bh.1001-5965.2013.0490

计及壁面传热的微型向心涡轮气动设计探讨

doi: 10.13700/j.bh.1001-5965.2013.0490

北京航空航天大学航空发动机气动热力重点实验室, 北京 100191

基金项目:

领航创新基金资助项目（YWF-10-01-B03）

详细信息

作者简介:
丁超（1990-），男，山东淄博人，博士生，291893988@qq.com.

中图分类号: V231.3
计量
- 文章访问数: 1300
- HTML全文浏览量: 190
- PDF下载量: 625
- 被引次数: 0
出版历程
- 收稿日期: 2013-09-18
- 网络出版日期: 2014-07-20

Aerodynamic design of micro radial inflow turbine with wall heat transfer

National Key Laboratory on Aero-Engines, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

摘要

摘要: 毫米级微型向心涡轮传热效应显著区别于常规向心涡轮，发展计及壁面传热效应的微型向心涡轮的气动设计方法对微型燃气轮机的设计具有重要意义.根据微型向心涡轮壁面非绝热的特点，通过理论分析，初步建立了计及固壁传热效应的微型向心涡轮速度三角形的分析模型.在此基础上发展了计及传热效应的微型向心涡轮的气动设计方法.分析得到了考虑传热影响的微型向心涡轮设计规律.利用三维数值模拟手段对模型和设计方法进行了验证.结果初步表明所发展计及壁面传热效应的模型和微型向心涡轮气动设计方法具有较好的可行性.
- 传热 /
- 微型 /
- 向心涡轮 /
- 设计方法 /
- 数值模拟
Abstract: The heat transfer effect is a significant difference between the micro radial inflow turbine and the conventional radial inflow turbine, so it is very important to take the wall heat transfer effect into consideration when designing a micro radial inflow turbine. Based on the feature of non-adiabatic wall in the micro radial inflow turbine, and through theoretical analysis, a velocity diagram analytical model was obtained preliminarily. On that basis, the aerodynamic design method of the micro radial inflow turbine was developed. Then the design rule of the micro radial inflow turbine considering wall heat transfer effect was summarized. Finally a three-dimensional numerical simulation was carried out to verify the obtained model and design method. Results show that the model and design method of the micro radial inflow turbine considering wall heat transfer effect is feasible.
- heat transfer effect /
- micro /
- radial inflow turbine /
- design method /
- numerical simulation

HTML全文

参考文献(18)

[1]	Epstein A H, Senturia S D, Anathasuresh G, et al.Power MEMS and microengines[C]//Proceedings of the 1997 International Conference on Solid-State Sensors and Actuators.Piscataway, NJ:IEEE, 1997, 2:753-756
[2]	Spearing S M, Chen K S.Micro-gas turbine engine materials and structures[J].Ceramic Engineering and Science Procedings, 1997, 18(4):11-18
[3]	Epstein A H, Senturia S D.Macro power from micro machinery[J].Science, 1997, 276:1211
[4]	Epstein A H. Millimeter-scale, MEMS gas turbine engines[R].ASME GT-2003-38866, 2003
[5]	冯涛, 周颖, 邹正平, 等.向心涡轮内部流动数值模拟分析[J].航空动力学报, 2003, 21(3):448-454 Feng Tao, Zhou Ying, Zou Zhengping, et al.Numerical simulation of the flow inside radial inflow turbine[J].Journal of Aerospace Power, 2003, 21(3):448-454(in Chinese)
[6]	黄国平, 梁德旺, 马向东, 等.微型涡轮发动机传热效应的建模分析与实验研究[J].航空学报, 2008, 29(3):542-547 Huang Guoping, Liang Dewang, Ma Xiangdong, et al.Modeling analysis and experimental study on heat transfer effect in micro turbine engine[J].Acta Aeronautica et Astronautica Sinica, 2008, 29(3):542-547(in Chinese)
[7]	Rautenberg M, Mobarak A, Malobabic M.Influence of heat transfer between turbine and compressor on the performance of small turbocharger[C]//Proceedings of the 1983 Tokyo International Gas Turbine Congress.Tokyo:Gas Turbine Soc of Japan, 1984, 2:567-574
[8]	Rautenberg M, Kammer N.On the thermodynamics of non-adiabatic compression and expansion processes in turbomachines[C]//5th Intl Conference of Mechanical Power Engineering, 1984:13-15
[9]	Isomura K, Murayama M, Kawakubo T.Feasibility study of a gas turbine at micro scale[J].ASME Paper, 2001(2001-GT):0101
[10]	Sirakov B T. Characterization and design of non-adiabatic micro-compressor impeller and preliminary design of self-sustained micro engine system[D].Cambridge:Massachusetts Institute of Technolog, 2005
[11]	Gong Y, Sirakov B T, Epstein A H, et al.Aerothermodynamics of micro-turbomachinery[C]//The ASME Turbo Expo 2004.Vienna:ASME International, 2004, 6:95-102
[12]	Watanabe N, Teramoto S, Nagashima T.Numerical analysis of 2.5 dimensional geometry turbine performance[C]//Proceedings of the International Gas Turbine Congress, 2003:2-7
[13]	Onishi T, Burguburu S, Dessornes O, et al.Numerical design and study of a mems-based micro turbine[C]//Proceedings of the ASME Turbo Expo.Reno-Tahoe, NV:ASME, 2005, 1:847-855
[14]	Wiesche S A D. A mobile test rig for micro gas turbines based on a thermal power measurement approach[J].Journal of Engineering for Gas Turbines and Power, 2012, 134(11):112301
[15]	龚建波, 林峰, 徐纲, 等. 非绝热小燃机热力学模型分析[J].工程热物理学报, 2009, 30(10):1643-1647 Gong Jianbo, Lin Feng, Xu Gang, et al.Analyse of a thermodynamic model of a non-adiabatic small gas turbine[J].Journal of Engineering Thermophysics, 2009, 30(10):1643-1647(in Chinese)
[16]	付雷, 丰镇平. 毫米级微型燃气轮机系统设计原则与可实现性循环分析[J].西安交通大学学报, 2011, 45(5):42-46 Fu Lei, Feng Zhenping.Design principle and cycle analysis of millimeter-scale micro-turbine[J].Journal of Xi'an Jiaotong University, 2011, 45(5):42-46(in Chinese)
[17]	边磊, 严泽想, 邹正平.影响毫米级微型涡轮气动性能的若干参数[J].航空动力学报, 2012, 27(10):2287-2296 Bian Lei, Yan Zexiang, Zou Zhengping.Influences of several parameters on aerodynamic performance of micro-radial turbine[J].Journal of Aerospace Power, 2003, 21(3):2287-2296(in Chinese)
[18]	周琨, 边磊, 邹正平, 等.壁面导热对微型向心涡轮性能及流动影响[J].推进技术, 2013, 34(9):1248-1256 Zhou Kun, Bian Lei, Zou Zhengping, et al.Effect of wall heat transfer on performance and flow for micro radial inflow turbine[J].Journal of Propulsion Technology, 2013, 34(9):1248-1256(in Chinese)